Green Source Hydrogen (HHO) Generator ProKit

Improve Fuel Economy on ANY Gasoline, Diesel or LPG vehicle

 

Green Source ProKit Hydrogen Generator uses electricity from your vehicle’s battery to create hydrogen from water while you drive. The hydrogen is then fed into the engine delivering a cleaner, more efficient combustion. 

With this innovative Hydrogen on Demand technology you will use LESS FUEL and SAVE MONEY.

ProKit’s extremely efficient design delivers the maximum possible Hydrogen output (limited only by laws of physics) at the lowest current consumption, operating temperature and cost available today.

Specifications:

Maximum engine size: 7.5 litres

Maximum Hydrogen Output: 2.2 LPM

Electrode configuration: 7 plates (5 neutrals)

Current consumption: 5-30 AMPs (HHO Output varies accordingly)

Stainless Components Grade: 316 (Highest Possible)

Physical Size: approximately 7x7x1.5 inches

 

Importance of the Number of Plates

Plate configuration is one of the most important, yet least understood aspects of a dry cell design.  The efficiency of a dry cell increases with the number of plates, to a maximum of seven.  

This seven plate configuration has one “positive”, one “negative” and five floating “neutral” plates, forming a total of six electrolysis reaction chambers. To oversimplify, each electrolysis chamber requires 2 Volts. Therefore a 12 Volt vehicle is limited to seven plates.

13, 18, etc. plate dry cells are simply several 6-chamber cells connected together to form one unit. Each individual cell still operates at 12 V.

Having five neutral plates and large plate surface area is what creates a good, efficient cell.  See the example below.

 

Number of Plates	Neutral Plates per Chamber	HHO Output @ 25Amps	Cell Rating
7	5	1.8 Litres/Minute	Excellent
25	3	1.2 Litres/Minute	Fair

As you can see from the above chart, the seven plate cell produces 50% more HHO than the 25 plate version.  In addition, the cube shape of the 25 plate design runs hotter and is much more likely to overheat.

The Green Source ProKit Advantages:

1.        Beautiful, rugged construction utilizes only the best components.

2.        Slim design fits modern, compact vehicle and makes installation easy.

3.        Innovative, tool-free tubing connectors swivel a full 360 degrees, allowing the best tube routing for any specific vehicle.

4.        This is a complete, fully assembled kit.

5.        Extremely efficient electrode design maximizes HHO, offers coolest operation and operates between 5-30 Amps.

6.        Reservoir/bubbler provides fluid level monitoring and easy access to water refills. 

7.        Full range of electronic accessories compatible with ANY HHO system.

Benefits of Hydrogen Technology

1 Lower Fuel Consumption: 10% to 50%

2 Significant Reduction in emissions (CO, NoX)

3 Extended engine life

4 Increased torque (stronger, smoother acceleration)

5 Greater power                                                                 

6 Cleaner oil resulting from less carbon deposited in the engine 

 

This kit includes:

1.   ProKit HHO Generator with 316 stainless steel electrode pack 

2.   1 Quart capacity (approx 1 litre) Reservoir/Bubbler with standard ¼” tubing fittings and convenient, oversized 2” refill port.

3.   15 feet of top quality, braided reinforced tubing

4.   Two 90 degree swivel adaptors for tubing connection

5.   Flashback arrestor

6.   Fusible link (fuse and holder)

7.   10 feet (16 gauge) red primary hook up wire (for 12 volts)

8.   5 feet (16 gauge) black secondary hook up wire

9.   1 illuminated toggle switch

10.             3 female spade, “Quick Disconnect” connectors for connecting to the toggle switch

11.             Comprehensive, yet easy to understand instruction manual

Green Source is an engineering company dedicated to the research and development of Fuel Saving Technologies. We offer the industry’s most efficient and affordable HHO supplementation systems.

Our systems are compatible with each other, work for all types of engines and are easily transferable from one vehicle to another.

  CLICK HERE TO SEE OUR OTHER GENERATORS!

Frequently Asked Questions

Where can I find more information on this technology?

Please, visit our website 

 

Will it work on my car?

Our equipment works for any type of vehicles and any fuel types.

 

Which generator do I need?

The ProKit is your best choice for any vehicle, large or small.  It works comfortably on ANY size engine up to 7.5 liters in size.

Please see our other generators for those on a tighter budget.

 

Will it improve my mileage?

On average 25% gains are achieved, often MUCH more if you also use our electronic engine tuning products. Green Source is the industry leader in HHO electronics and offers a full spectrum of products to serve all budgets and needs.

Why trick the computer?

On newer, computerized vehicles, it is possible for the ECU to detect the more efficient combustion created by HHO.  A common result is for the computer to ‘react’ to this leaner fuel-air ratio by adding more fuel, minimizing your efficiency gains.  .

 

What is EFIE? 

EFIE (Electronic Fuel Injection Enhancer ) is an electronic signal manipulator that alters the O2 sensor signal, which in turn, prevents the computer from interfering with the operation of HHO.  The Green Source EFIE is the basic unit you need to increase your air-fuel ratio and save fuel in your HHO set up.

What is a ProTuner?

HHO will improve your combustion efficiency, yielding better gains in economy.  Greater gains will ALWAYS occur if you lean the air-fuel ratio with electronics. 

EFIE is the most basic approach, modifying your O2 sensor signals. Manipulating more sensors with ProTuner, increases your savings dramatically.

ProTuner controls the engine sensors to make the car’s computer think it is going down the hill. The condition when the car consumes the least amount of fuel.    

Our very detailed manual will show you step by step how to install the ProTuner, getting great results with as little as a single wire connection. 

ProTuner controls the following sensors:

EFIE

MAP-Manifold Absolute Pressure

IAT-Intake Air Temperature

ECT-Engine Coolant Temperature

Analog-EFIE (rear O2 sensors)

Digital EFIE (strong manipulation for front O2 sensors)

Has a built-in CCPWM 

 

Do I Need a PWM? 

If you require substantial HHO output, you need a PWM. PWMs control the current inside the generator, thus the HHO flow, and the temperature of the operation.

We strongly recommend using PWM if:

1.   You use KOH or NaOH as an electrolyte

2.   You do not want to risk overheating the hydrogen generator

3.   You live in a warm climate and/or require the generator to be working at higher flow rates, ie. near their capacity. 

 

Why Constant Current Pulse Width Modulation (CCPWM)?

Unlike Regular PWM, CCPWM does NOT allow the HHO generator to keep increasing its HHO output as it warms up and/or on hot days.  Other systems let the HHO keep getting hotter and drawing more current (an issue called “Thermal Runaway”); a condition that leads to boiling the water in the HHO system.  The Green Source CCPWM prevents this problem and is especially important if installing on larger V6/V8 engines.

     

Distributors Welcome

We are looking for motivated people to sell our fuel saving products for cars and trucks. We offer our distributors the best products on the market at the lowest price. Set your own hours to earn money while helping others to cut fuel costs.

 

Shipping Information

We ship within 48 hours of the order.

Standard Flat Rate Shipping is $20.00 for the US, $18 for Canada. Delivery up to 10 BUSINESS days.

The rest of the world: $35 (air shipment, delivery 10-15 BUSINESS days).

Combined shipping rates are only available for units purchased at the same time 

 

	one unit	second unit
Canada	$18	$5
USA	$20	$6
The Rest of the World	$35	$20

HAPPY BIDDING!
 Good luck with your GREEN efforts and tell others about it