PA-FLME09

8-PINs Electronic LED Flasher Relay Fix For Turn Signal Light - Mostly (means not all) used for LEXUS, TOYOTA (CAMRY or Newer Types) versions

This Relay works only when your car has All LED bulbs installed in Signal Light, that will be not working if you only install LED for partial parts of your signal lights

please compare your original one in your car before buying, thats really IMPORTANT!!!

please compare your original one in your car before buying, thats really IMPORTANT!!!

12V

PRODUCT INFORMATION

• Solve LED related turn signal problems such as fast blink, flash( See Remark Below)

• DC 12V

• Designed for most 8-pin Japanese brand cars.( Depends on different vehicle parts, not for ALL, THIS TYPE IS USUALLY APPLIED FOR NEWER TOYOTA SERIES CARS such as CAMRY or LEXUS Series, DOES NOT MEAN FOR ALL SAME BRAND CARS )

• Long life span

• Plug N' Play directly (check your origin relay in car, usually located in fuse box)

• Made In Taiwan

• Per-Accurate Part No. : FLME09

• Connection Instructions & Specification:

Remark:

FLASH SPEED ISSUES FOR SIGNAL/TURN LIGHT APPLICATION--

Normally when you flip your turn signal switch, the light blinks at a set, slow pace. However, if you have modified your lights to use LEDs, you'll notice that the turn signals now blink very quickly. This is caused by the low resistance of the LEDs due to the fact that they use less energy. To correct the problem, you'll need to wire the turn signals in a parallel circuit. To do this, you'll be installing a resistor or control flasher.(Here it is!)

＊Another solution is the installation of Load Resistors which are wired across (in parallel with) the turn signal bulbs to simulate the load of a standard filament bulb. We also have Load Resistor available in our car bulb shopping category, please click here

BEFORE BUYING, PLEASE NOTE--

• Make sure item SIZE (Width & Length indicated in photo of description) and Voltage(12V-CAR/MOTORCYCLE ; 24V-TRUCK) are fitted

• Sorry we do not know which one (if any) will fit your vehicle. You have to compare the pin-out of your flasher with the pin-outs of the flashers we offer, to see if we have a match.(check your origin relay in car, usually located in fuse box)

• There are 2 basic versions 8 PIN LED flashers but with different PIN array & positions(FLME09: "+" in Pls. see 2nd line of PINs ; FLOC436: "+" in Pls. see 2nd line of PINs, usually for Ford or Asian Mazda versions ), PLEASE make sure this point before buying

• Failure to check above and installation in an incompatible vehicle may brake your fuse, destroy the flasher

• Make sure item SIZE (Width & Length indicated in photo of description) and Voltage(12V-CAR/MOTORCYCLE ; 24V-TRUCK) are fitted

• This is an International Sales and there is no possibility to have the same delivery time as your local seller.

• Product Emitting Photo was shot in a dark room, the real brightness is determined by the real circumstance.

• Please make sure this emitting color is legal in your place, we are not responsible for any buyer's local law problem

• Please read all information in description CLEARLY

TERMS & CONDITION

PACKING

• Qty.: As Title Shows

• Pack with white paper box