godspeed 90-96 300zx nissan z32 (turbo motor only) side mount intercooler core (2)
3 YRS WARRANTY
Check out the picture. compare the stock , greddys and the godspeed one. the godspeed intercooler 2 times bigger then stock, and 40% bigger then greddy. this will allow much better air flow and more horsepower capacity.
Direct bolt on / polished intercooler core.
INTERCOOLER SPEC:
bar & plate design for better cooling efficiency
max horsepower capacity : 500hp+
| CORE LENGTH |
11" |
| CORE HEIGHT |
8" |
| CORE THICKNESS |
3.5" |
| INLET / OUTLET SIZE |
2" |
| END TO END LENGTH |
13"x11"x3.5" |
GODSPEED Intercooler improve both the efficiency and power of any turbocharged application by rapidly reducing inherent heat levels of the compressed intake air charge before entering the engine. By utilizing a special BAR and PLATE full aluminum design, the intercooler acts as a large heat exchanger that dissipates the heat generated by the compression of the intake charge without creating reductions in boost pressure or response.
As the pressurized air is channeled through the thin tubes of the intercooler core, that are filled with internal radiating fins, cool ambient air rushes through the front of the core, where the external radiating bar and plate draw out the heat. This heat transfer decreases the likelihood of detonation by reducing the inlet temperatures and maximizes power output by increasing the density of the air inlet charge, therefore increasing overall hp levels as the intake charge is now cooler and denser. Boost response and airflow is also often improved from the intercooler upgrades larger flow capacity and cooling efficiency.
GODSPEED intercoolers are designed to give maximum cooling capacity while allowing for minimal pressure drop. This is especially important if boost pressure is being raised, greatly reducing the chance of detonation. GODSPEED intercoolers has been known as the most efficient intercooler with a pressure drop of .05kg/cm2 at 1.2kg/cm2 of boost.
*note: as you may know these are after market parts. We recommend professional installation. you are require to cut the factory air guide to fit this intercooler.
