T04E TURBOCHARGER .A turbo kit is the most efficient way to dramatically increase horsepower and torque with the ability to upgrade even more power. Our turbochargers are mostly a bolt on application for stock/modified motors with the proper manifold and are designed to provide optimal power, response, drivability, reliability, fun,and comfort. For naturally aspirated motors looking for real power without sacrificing lots of time and money, then a turbo (forced induction) is the only way to go.
- 100% Brand New, Never Been Used or Installed
- Made of High Quality Cast with Steel Material
- Capable of Producing 150-400 Hp
- Wet Float Bearing, Oil Cooling 1/8 NPT Adaptor
- Utilize External Wastegate
- Compressor Spec: M24 / T4 Compressor Housing
- 3" Intake Inlet, 50.5mm Inducer, 76mm Exducer
- 57 Trim, 0.50 A/R
- Turbine Spec: T3 Housing Flange, 11 Blades Type
- T3 Manifold Flange, 2.75" 5Bolt Downpipe
- 65.5mm Inducer, 55.9 Exducer, 0.63 A/R
- Exactly Same As the Picture Below
- Professional Installation Is Highly Recommended
CAST IRON TURBO MANIFOLD The heart of any turbo system is the manifold and the turbocharger. These form the basis where the rest of the turbo system is built around. There is no match for power and performance for tubular manifolds. Tubular manifolds are chosen over cast manifolds for big power applications. Tubular manifolds feature better and more consistent flow of exhaust gases. Tubular manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow for accurate readings and precise control.
· 100% Brand New, Never Been Used or Installed
· Made of High Quality steel with cast iron
· Bolt-on Design Easy to Installation
· Direct OEM fitment high temperatures without breaking.
· Connect T3/T4 Turbo Flange, 35mm / 38mm External Wastegates Flange
· Exactly Same as The Picture Below
· Professional Installer is Highly Recommended (No Instrcution Included)
Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine.
Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbines performance.
FEATURE :
-
100% Brand New. Never been Tried or Installed 38MM V-BAND WASTEGATE
-
EXACTLY the same as the picture below
-
All Stainless Steel hardware
-
No instructions included. Professional installation is highly recommended
APPLICATION: HONDA/ACURA WITH B-SERIES MOTOR ONLY!