Click on the thumbnails to supersize

Item Description

NOTE: These covers will only fit the seat style as pictured above and are NOT custom. If your vehicle is listed in the compatibility section above, please be aware this only states that these seat covers MAY work for your vehicle IF you have the seat type that is shown above (Please also see the Note section next to your vehicle Compatibility search). Many vehicles will have more than one seat type that comes standard in the same year, make, and model. To ensure a proper fit, please read our item page below to make sure these seat covers will accommodate your seat type in your vehicle. If your seat type is Not as pictured above and does Not have similar measurements (shown above), these seat covers may Not work for you. If you have questions concerning fit please contact us via eBay or you can telephone us with the number on our about me page

FABRIC: Synthetic Leather similar to vinyl but softer than vinyl, with thin foam type backing (not as thick as genuine leather or vinyl) on seating area of seat covers. Front buckets will have a 3/4 to full stretchy polyester backside, depending on the height of the seat (the part you see from the rear seat of the vehicle) that will help conform the seat cover to the molds of the seats. Both pieces of The FREE rear bench will be trimmed in the same polyester for added conformation. Floor mats are carpeted with Anti-Slip ribbed tip backing. (if you have pockets located on the backside of your seats, they will be covered with these seat covers in place).

INSTALLATION: These seat covers slip over your existing factory seats and fasten underneath the seat with pre-sewn elastic straps and S-hooks. You may adjust these straps as needed for a more custom look. We recommend removing your headrest posts before installing these seat covers. After your seat covers are in place you can reinsert your head rests posts. The difficulty of this seat cover package to install depends on the ease at which your head rests are removed and on the access that you have behind and beneath your seats. If your rear bench back rests are able to fold down independently from one another you will need to cover both pieces as one unit to use this FREE standard bench.

COLOR: Red and Black

INCLUDED IN THIS PACKAGE: 2 standard low back seat covers with 2 matching head rest covers for front buckets (Bucket seat covers will feature a Velcro opening to accommodate EITHER side seat airbags OR a single fold down interior armrest, if applicable), 1 steering wheel cover (made to accommodate standard size steering wheels that are 14-1/2 to 15 inches in diameter), 2 seat belt shoulder pads, 2 front standard cut floor mats, 2 rear standard cut floor mats, and a FREE 2-piece standard rear bench (one piece will wrap the back part of the bench seat and the other piece will wrap the seat area) and 2 head rest covers for your rear bench seat cover.

FREE Bench Seat Cover Details: Our bench seat cover, included in this package for FREE, will come in 2 pieces, 1 piece will wrap the backrest portion of the bench seat as one unit and the 2nd piece will wrap the seat cushion area as one unit. Because of the 2 piece design this bench cover will fit most standard benches (please see bench seat type shown above). Because this is a universal bench, it will not have a full backside (the part you see from the rear window). Some rear benches will need to be removed for installation.

This bench seat cover best accommodates bench seats without any type of head rests or with head rests that may be removed. We recommend removing your bench seat head rests, if applicable, before installing the back rest seat cover portion of your bench. After your bench seat cover is installed, you are able to make tiny X's in the seat cover to re-insert your head rest posts. The bench seat backrest cover is approximately 54 inches in length and 26-28 inches in height and will have 5 inches of stretchy polyester on the 2 outer edges with alternating Red and Black Panels lining up vertically in-between. The bench seating area cover is approximately 54 inches in length and 22-23 inches wide and will have 5 inches of stretchy polyester on 3 sides (when installed this polyester trim will be on the sides of the seat closest to the doors and the seat front edge) and will have alternating Red and Black Panels between.

NOTE: Split bench functionality or fold down arm rest functionality, if applicable, will be lost with our FREE standard bench seat cover in place. These seat covers will cover your entire bench seat as one unit with your arm rest folded in the upright position along with the back of your seat, if applicable. Most bench seats will have the seat belts exiting through the crease where the backrest of the seat meets the seat cushion area at the back of the seat, and do not require ready made openings for the seat belts. Because seat belt openings may vary in location on the rear bench our standard universal design bench seat covers will not feature pre-made openings. However, the material is guaranteed not to fray or tear when cut for openings (as long as cut is not made on a seam, or stretchy polyester material). Please make sure seat covers are satisfactory before making any modifications. The functionality of the seat-belts shouldn't be lost with this bench seat cover installed on the seat if installed properly.

These covers will only fit the seat style as pictured above and are NOT custom. Many vehicles will have more than one seat type that come standard in the year, make and model. We have chosen the best standard cut seat covers for your year, make & model to save you $$$. If you have questions concerning fit please contact us via eBay or you can telephone us with the number on our about me page

IMPORTANT FLOOR MAT INFORMATION:These floor mats are NOT Custom OEM floor mats. These are standard fit floor mats with the dimension shown above. The floor mats are one solid piece and do NOT feature an opening for the clip (grommet) which some vehicles will feature to help hold the driver's side floor mat in place. If your vehicle features this grommet you are able to make a small opening in the floor mat so that you are able to hook it into place using this clip. Please make sure mats are satisfactory before making any modifications, as modified mats and seat covers cannot be returned for a refund.

STEERING WHEEL COVER INSTALLATION: To make your steering wheel cover more pliable during installation, we recommend that that you warm it. This should help make it a little more flexible for installation. Also, to aid in the installation, insert a flat, dull-edged object (such as butter knife or a bicycle tire changing tool) between the cover and steering wheel and slide the tool along the edge. (Unfortunately if your steering wheel is greater than 15 inches in diameter, this cover may not fit.) You will want a snug fit with your steering wheel cover in place. If the steering wheel cover is loose it may slip while driving.

Shipping

STANDARD SHIPPING: Your order will be shipped via UPS or FedEx Standard within 1-2 business days providing your payment has cleared and we have all required information needed. Normal time in transit is 3 to 7 business days. East Coast deliveries please allow 7 to 10 business days. If for any reason your order will be delayed, you will be notified by email. NOTE: We do not ship on Saturday, Sunday, or Holidays

PLEASE NOTE: If you are located outside the 48 Continuous United States or are requesting this package to be shipped to a P.O. Box to a United States Zip Code, please contact us before purchase as an additional $21.15 in Shipping and Handling charges will need to be added to your invoice.Orders without correct shipping amount will be refunded in full then re-invoiced with the correct shipping amount and will cause a delay in shipment.

Payment Information

Returns and Refunds

100% Satisfaction Guarantee-If you are not satisfied with your purchase return it to us within 21 days of receipt of your order for a full refund (less original shipping charges). Returned items must be in original (new) condition, with associated packaging. Customers are responsible for return shipping costs. Once the product is received by us we will issue a refund for the merchandise amount . We cannot refund original shipping charges. Include item # with package.