A revolutionary 3-in-1 digital protractor uses angle sensor technology to calculate exact angles simply by tilting it to the desired angle! Measurements are generated by a electronic gravity sensor to provide unsurpassed accuracy throughout the protractor's 360° (4 x 90°) range. If using upside down the display will automatically rotate so it always remains upright for easy reading, while simple self calibration requires no other fixtures. With high resolution & accuracy, providing unparalleled accuracy and stability. With v-groove ensures it sits flat against any surface or round objects such as pipes, shafts or rods and powerful magnets on bottom plate for secured attachment.

With ABSOLUTE MEASUREMENTS, the most commonly used mode to find the right level of a surface as you would with a traditional spirit level. This mode makes it easy to check roof slopes, picture hangings, fence posts, kitchen benches, roll cage angles, wheel alignment, road cambers etc. Provides RELATIVE MEASUREMENTS where you can set any angle as 00.0°, and from that reference point you can take relative measurements. For instance you may want a surface that is 25° off the horizontal displayed as 00.0° so you can measure all other angles from that datum.

Uses angle sensor technology to calculate exact angles simply by tilting it to the desired angle! Angle finder, protractor & level all in 1 smart tool!

Buy Now!

Features:

• Provides immediate, digital reading of all angles in its 360° (90° x 4) full range measurement
• Versatile measuring tool: angle finder, protractor and level, three in one
• Large clear LCD display remains upright to view at all angles, no matter which way the level is turned and even when level is inverted for overhead measurements
• High-impact, high-precision machined aluminum framework
• Provides horizontal measurement and relative measurement
• Reset mode and simple self calibration, requiring no special fixtures
• 3V lithium battery lasts 2000 hours with continuous use
  
• Hold button allows you to lock the display
• Base plate has V-groove for accurate registration on curved or cylindrical surfaces with built-in magnets for secured attachment
• Brand new, light weight and portable
• Guarantees fast & accurate measurement readings
• Alternate zero reference can be set at any angle
• On-site recalibration to factory setting
• Great tool for professional and bench power tool user on angle measurement
• 360° measurement range allows you to work both horizontal and vertical planes
• Digital sensor module
• Angle displayed in degrees (°)
  

Essential for a wide range of applications, setting angle over the full 360° range:

• Measuring Range: 4x90°(0~360°)
• Resolution: 0.1°
• Accuracy: 0° and 90° ≤ 0.1° (based on horizontal position, relative to the ground level position)
  ****** * rest of the angle ≤ 0.2°
• Work temperature: 5°C~40°C
• Work humidity: ≤ 85%RH
• 3 control switches: on/off switch, zero switch and hold switch
• Power: CR2032 3V lithium battery
• Battery Life: 2000 hours in continuous use
• Simple 30 second calibration
• Large LCD display
• Readings always stay upright
• Display hold button

Accessories included:

• FREE Vinyl case with belt loop
• FREE 3V CR2032 button battery x 2
• User manual/guide
  

Warranty: 2 years warranty

All our products are manufactured under the strict quality control guidelines established by EN ISO9001-2000 Standards


Easy & Quick Calibration Procedure: Self-Calibrate in less than 30sec!

• Place the unit on a solid smooth surface and align with an edge or straight line.
• Press and hold the on/off button for longer than 6 seconds, then release and -1- will appear on the display.
• Press the zero button and the -1- will blink.
• Wait 6 seconds until -2- is displayed.
• Rotate the unit 180° horizontally so it faces away from you and align with the same edge or line.
• Press the zero button and the -2- will blink.
• Wait 6 seconds for the blinking to stop, the actual angle will then be displayed.
• The unit is now calibrated!