First Available Dual Mode
Hydrogen (HHO) Generator HydroKit
Improve Fuel Economy on ANY Gasoline, Diesel or LPG vehicle
Green Source HydroKit Hydrogen Generator uses electricity from your vehicle’s battery to create hydrogen from water while you drive. The hydrogen is then fed into the engine delivering a cleaner, more efficient combustion. With this innovative Hydrogen on Demand technology you will use less fuel and save money.
Make HHO with 12 Volt Electrolysis OR With Chemical Methods
Switch between super high output, PURE H2 (chemical generation) and convenient 12 Volt electrolysis HHO production.
With Chemical Generation no electricity is required. It works on a simple and very inexpensive chemical reaction using aluminum and water. Each gram of Aluminum can react to produce 1.2 liters of hydrogen at standard atmospheric pressure.
The chemical mode makes PURE H2 at higher rates than electrolysis with NO OXYGEN generated.
Specifications:
Maximum engine size: 3.0 litres
Maximum Hydrogen Output: 1.3 LPM
Physical Size: 9 inches tall and 4 inches wide
Benefits of Hydrogen Technology
1. Lower Fuel Consumption: 10% to 50%
2. Significant Reduction in emissions (CO, NoX)
3. Extended engine life
4. Increased torque (stronger, smoother acceleration)
5. Greater power
6. Cleaner oil resulting from less carbon deposited in the engine
Green Source is an engineering company dedicated to the research and development of Fuel Saving Technologies.
We offer the industry’s most efficient and affordable HHO supplementation systems.
Our systems are compatible with each other, work for all types of engines and are easily transferable from one vehicle to another.
The Green Source HydroKit Advantages:
1. Stainless steel outer construction looks great and protects the glass liner.
2. Rubber lid further protects the generator while providing an easy, fast tight seal.
3. Glass liner is immune (inert) to all chemicals and is very easy to clean.
4. Inspection Port allows you to monitor the reaction and water level.
5. Professional Binding/Terminal Posts provide easy, secure electrical connection to power the generator with 12 Volts. It also allows for easy changing between chemical and electrolysis modes, should you want to try both
6. Excellent, educational manual provides lots of additional, useful information and money saving tips.
7. Operates at 8-12 amps so there is no need of an automotive wiring relay.
8. HHO OR Pure H2 output, no other gases are created.
9. You get 2 systems in 1.
10. Full range of electronic accessories compatible with ANY HHO system to optimize your set up.
This kit includes:
1. Hydrogen generator reaction vessel with stainless outer and glass liner
2. Rubber lid with professional dual electrical connector and gas fitting
3. Stainless Steel electrode pack
4. 15 feet of top quality, braided reinforced tubing
5. Flashback arrestor
6. Fusible link (fuse and holder)
7. 10 feet (16 gauge) red primary hook up wire (for 12 volts)
8. 5 feet (16 gauge) black secondary hook up wire
9. 1 illuminated toggle switch
10. 3 female spade, “Quick Disconnect” connectors for connecting to the toggle switch
11. Comprehensive, yet easy to understand instruction manual
We Have GENERATORS For All Needs & Budgets!!!
|
CLICK HERE TO SEE OUR OTHER GENERATORS!
Frequently Asked Questions
Where can I find more information on this technology?
Please, visit our website
Will it work on my car?
Our equipment works for any type of vehicles and any fuel types.
Which generator do I need?
HydroKit is good for vehicles up to 3.0 litres maximum engine size.
The ProKit is your best choice for any vehicle, large or small. It works comfortably on engines 1 to 7 liters in size.
Our SuperKit is a great generator for those with a little tighter budget, for use on vehicles up to 4.0 litres engine size.
Will it improve my mileage?
On average 25% gains are achieved, often MUCH more if you also use our electronic engine tuning products. Green Source is the industry leader in HHO electronics and offers a full spectrum of products to serve all budgets and needs.
Why trick the computer?
On newer, computerized vehicles, it is possible for the ECU to detect the more efficient combustion created by HHO. A common result is for the computer to ‘react’ to this leaner fuel-air ratio by adding more fuel, minimizing your efficiency gains. .
What is EFIE?
EFIE (Electronic Fuel Injection Enhancer ) is an electronic signal manipulator that alters the O2 sensor signal, which in turn, prevents the computer from interfering with the operation of HHO. The Green Source EFIE is the basic unit you need to increase your air-fuel ratio and save fuel in your HHO set up.
What is a ProTuner?
HHO will improve your combustion efficiency, yielding better gains in economy. Greater gains will ALWAYS occur if you lean the air-fuel ratio with electronics.
EFIE is the most basic approach, modifying your O2 sensor signals. Manipulating more sensors with ProTuner, increases your savings dramatically.
ProTuner controls the engine sensors to make the car’s computer think it is going down the hill. The condition when the car consumes the least amount of fuel.
Our very detailed manual will show you step by step how to install the ProTuner, getting great results with as little as a single wire connection.
ProTuner controls the following sensors:
EFIE
MAP-Manifold Absolute Pressure
IAT-Intake Air Temperature
ECT-Engine Coolant Temperature
Analog-EFIE (rear O2 sensors)
Digital EFIE (strong manipulation for front O2 sensors)
Has a built-in CCPWM
Do I Need a PWM?
If you require substantial HHO output, you need a PWM. PWMs control the current inside the generator, thus the HHO flow, and the temperature of the operation.
We strongly recommend using PWM if:
1. You use KOH or NaOH as an electrolyte
2. You do not want to risk overheating the hydrogen generator
3. You live in a warm climate and/or require the generator to be working at higher flow rates, ie. near their capacity.
Why Constant Current Pulse Width Modulation (CCPWM)?
Unlike Regular PWM, CCPWM does NOT allow the HHO generator to keep increasing its HHO output as it warms up and/or on hot days. Other systems let the HHO keep getting hotter and drawing more current (an issue called “Thermal Runaway”); a condition that leads to boiling the water in the HHO system. The Green Source CCPWM prevents this problem and is especially important if installing on larger V6/V8 engines.
Distributors Welcome
We are looking for motivated people to sell our fuel saving products for cars and trucks. We offer our distributors the best products on the market at the lowest price. Set your own hours to earn money while helping others to cut fuel costs. |
Shipping Information
We ship within 48 hours of the order.
Standard Flat Rate Shipping is $20.00 for the US, $18 for Canada. Delivery up to 10 BUSINESS days.
The rest of the world: $35 (air shipment, delivery 10-15 BUSINESS days).
Combined shipping rates are only available for units purchased at the same time
|
one unit |
second unit |
Canada |
$18 |
$5 |
USA |
$20 |
$6 |
The Rest of the World |
$35 |
$20 |
HAPPY BIDDING!
Good luck with your GREEN efforts and tell others about it!