GT45 T4 20PC TURBO KIT W/INTERCOOLER+MANIFOLD+WASTEGATE CHEVY SMALL BLOCK CAMARO

GT45 T4 20PC TURBO KIT W/INTERCOOLER+MANIFOLD+WASTEGATE CHEVY SMALL BLOCK CAMARO
High Compression/ Boosting GT45 Oversize Turbocharger
FEATURES -----------------------------------------------------------------------------------------------------------------------
Capable of Boosting Horse Power up to 600+ BHP	High Quality Material, Cast Housing with Durable Steel
Exhaust (Turbo Manifold) Flange: Standard T4 4 bolt exhaust flange Exhaust (Downpipe) Flange: Standard 3.25" Inner Diameter V-Band Intake Inlet/ Outlet: 3.75"/ 2.25" Compressor: Trim: 69 A/R: .66 Inducer: 68.70 Exducer: 97.80   Turbine: Trim: 92 A/R: 1.05 Inducer: 87.40 Exducer: 77.00
High Performance Tubular Exhaust Turbo Manifold
FEATURES -----------------------------------------------------------------------------------------------------------------------
High Performance Turbo Racing Design Computerized Mandrel-Bended to Maximize Air Flow Smoothness Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder Standard T3/ T4 Configuration Outlet	Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing Increase Engine Exhaust Output and Efficiency 38mm/ 35mm External Wastegate Port and Flange Included
Lightweight Aluminum Front-Mount Intercooler
FEATURES -----------------------------------------------------------------------------------------------------------------------
High Performance Bar and Plate Turbo Racing Design Intercooler Overall Size: (24.50" Including Piping) 22.25" (L) X 10.75" (H) X 2.50"(W) Core Size: 17.75" (L) X 10.50" (H) X 2.50"(W) EInlet/ Outlet: 2.00"/ 2.00”	Made of High Quality T-6061 Aluminum Durable Material Helps Reducing Engine Inlet Temperature Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
Universal Aluminum Intercooler Piping
FEATURES -----------------------------------------------------------------------------------------------------------------------
Made of High quality T-6061 Lightweight Aluminum Piping Polished Surface Finish	Increase 65% Air Flow comparing with other Standard Piping 2.50" Piping Diameter
38mm Wastegate with Spring
FEATURES -----------------------------------------------------------------------------------------------------------------------
Comes with 8 PSI spring installed	High strength cast steel body with steel head
GT45 V-band clamps
FEATURES -----------------------------------------------------------------------------------------------------------------------
CNC machined stainless steel flange Made of Stainless Steel High performance use	Inner Diameter (Flange): 3.25" Outer Diameter (Clamp): 4.25"
Turbo Blow-Off-Valve
FEATURES -----------------------------------------------------------------------------------------------------------------------
Billet Aluminum Body 8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound Dual Spring System Promoted Response and Allows for High Boost Pressures	2-bolt mounting design 40mm, Hard-Anodized Valve for Increased Airflow Holds Up to 30 PSI Boost Pressure Aggressive JDM discharge sound
Aluminum 2.5” Flange Pipe
FEATURES -----------------------------------------------------------------------------------------------------------------------
Fits TYPE-S or TYPE-RS Dump Pipe Flange 2.5" Pipe Size	Construction Prevents Warping due To High Heat Made of High Quality T-6061 Aluminum, Lightweight Design
10AN Oil Feed Line
FEATURES -----------------------------------------------------------------------------------------------------------------------
Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability Length: 36.00" /Inner Diameter: 0.25"	1/8 NPT Fittings Natural Polish Finish CNC Machined Turbo Adapter Plate
30PSI Turbo Boost Controller
FEATURES -----------------------------------------------------------------------------------------------------------------------
CNC Machined Aluminum Body Worm Gear C-Clamp Included	1-30 PSI Adjustable Hardware and Fittings Included
15m Heat Wrap
FEATURES -----------------------------------------------------------------------------------------------------------------------
Made of High Quality Pulverized Lava Rock Converted Silicate Fiber Material for Maximum Heat and Wearing Resistance Withstands 2500 °F (Fahrenheit) Radiator Heat and 1800 °F (Fahrenheit) Direct Heat Tested to Tolerate Chemical, such as Radiator Fluid, and Oil Corrosion	Serves as Heat and Air Shield for Enhancing Energy Transfer and Air Flow Performance Dimensions: 2.00" (Width) X 1/16" (Thick) X 600"/ 50' (Length)
Turbo Timer
FEATURES -----------------------------------------------------------------------------------------------------------------------
Allows the vehicle to idle the engine, for the timed period, with the ignition key removed Universal for all manual & automatic transmission vehicles both turbo-charged or non turbo-charged.	Auto Mode - Precise calculation of cool down period to ensure proper cool down of turbo-charged engine. Digital display - Allowing you to see during day & night time
Fuel Pressure Regulator
FEATURES -----------------------------------------------------------------------------------------------------------------------
Fuel pressure regulator can deliver vehicles’ highest performance, with long life and high reliable operation Adjustable fuel pressure regulator with 1:1 ratio CNC machined light weight	Adjustable from (1-15) psi to (140) maximum fuel pump capacity Comes with hose and bolts install kit
High Sensitivity Voltage Stabilizer
FEATURES -----------------------------------------------------------------------------------------------------------------------
Improves Ignition Flow and Strengthens Starting Power Stabilizes Voltage, Improves Engine Performance Better Throttle Response Improve Fuel Efficiency Increase Headlight Brightness	Virtually Increases House Power and Torque Improve Audio Quality Longer Battery Life Time Specially Designed with High Water and Heat Resistance
High Conductivity Copper Ground Wire
FEATURES -----------------------------------------------------------------------------------------------------------------------
Made with High Quality Copper Material for Maximum Conductivity 1 X 25.00" (Overall Length) Ground Wire; with 24.50" (Distance of the 2 Centers of Connection Terminals) 2 X 33.00" (Overall Length) Ground Wire; with 32.50" (Distance of the 2 Centers of Connection Terminals) 2 X 40.50" (Overall Length) Ground Wire; with 40.00" (Distance of the 2 Centers of Connection Terminals) Exactly the Same as Shown in the Picture	High Quality Plastic Wrapped for Preventing Power Loss, Lowering any Electrical Resistance i.e.Increase the Effectiveness of the Entire Electronic System Essential especially for Any Vehicle with Engine Swaps since Grounding Tends to be an Issue with Performance Modifications Design for Centralizing the Grounding Point of the Electrical Circuit of Vehicles Essential especially for Any Vehicle with Engine Swaps since Grounding Tends to be an Issue with Performance Modifications Mounting Kits Included
16-Row 10 AN Oil Cooler
FEATURES -----------------------------------------------------------------------------------------------------------------------
Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials Powder-Coated and Oxidized for Durability and Protection Excellent for Modified Street Vehicles, which are Driven Hardly with Minimal Track Use Potentially Reduces Oil Temperature up to 50°F	Helps Reducing Coolant Temperature Made with High Quality T-6061 Aluminum Extends Engine Life Overall Size: 13.00" x 6.00" x 2.00" Core Size: 9.25" x 5.00" x 2.00" Inlet / Outlet Size: 10 AN
Oil Filter Relocation and Oil Line Kits
FEATURES -----------------------------------------------------------------------------------------------------------------------
Made of High Quality Lightweight Aluminum with CNC Laser Cut Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines 10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern Inner Hose Material: CPE Synthetic Material Tubing Maximized Resistance to Heat, Corrosion and Abrasion	Allows Installation of Larger Oil Filter Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters Quality Stainless Steel Braided for Strong Reinforcement of Strength and Durability Covered with High Quality Woven Nylon to Give a Cool Racing Appearance Woven (Mechanism) Construction for Enhancing Flexibility
Oil Drain Line
FEATURES -----------------------------------------------------------------------------------------------------------------------
CNC Machined Turbo Adapter Plate Stainless Steel Hose, Braided for Heat and Pressure Resistance, Strength and Durability 10AN Fittings	Inner Diameter: 0.50" Length: 17.00" Weldable 10AN Oil Pan Fitting Included
Oil Catch Tank
FEATURES -----------------------------------------------------------------------------------------------------------------------
TIG Welded T-6061 Light-Weight Aluminum Construction Light-Weight Filtered Breather Tank Design for Racing Applications Clear Tube Indicator for Easy Visual of Checking if the Tank is Full	Ensure Better Mileage, Better Performance and Preserve Engine Life Catch Oil and Sludge to Save the Life of the Engine
3" Mushroom Type Air Filter
FEATURES -----------------------------------------------------------------------------------------------------------------------
Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability 3" Filter Inlet, 3" Inner Diameter Pipe, 6" Overall Height Performance: Improves Up to 95% Filtration Efficiency	Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable Worm Gear C-Clamp Included For Intakes or Turbo Usages
100% Brand New Professional Installation is Highly Recommended (No Instruction Included)
APPLICATION -----------------------------------------------------------------------------------------------------------------------
66-75 Chevrolet Bel Air 5.7/ 6.6/ 7.4L V8 66-72 Chevrolet Biscayne 5.7/ 6.6/ 7.4L V8 1973 Chevrolet Blazer 5.0/ 5.7/ 7.4L V8 1973 Chevrolet Brookwood 5.7/ 6.6L V8 68-75 Chevrolet C-10/ Pickup/ Suburban 5.0/ 5.4/ 5.7/ 6.5/ 6.6/ 7.4L V8 90-93 Chevrolet C-1500 4.3/ 5.0/ 5.4/ 6.2/ 7.4L V8 68-75 Chevrolet C-20/ Pickup/ Suburban 5.0/ 5.4/ 5.7/ 6.5/ 6.6/ 7.4L V8 91-95 Chevrolet C-2500/ Suburban All V8 Models 1975 Chevy C30 73-75 Chevrolet C30 Pickup All Models 88-95 Chevrolet C3500 All Models 67-72 Chevrolet Camaro All Models 66-75 Chevrolet Caprice All Models 67-73 Chevrolet Chevelle All Models 1968 Chevrolet Chevy II All Models 66-74 Chevrolet El Camino All Models and More      ALL Models Above with SBC V8 GAS Single Turbocharged Engine ONLY     Please Check Compatibilities for Years and Models     Professional Installation is Highly Recommended, Modification might be Required
PACKAGE INCLUDES -----------------------------------------------------------------------------------------------------------------------
1 X GT45 Oversize Turbocharger 1 X Stainless Steel Turbo Manifold 1 X Lightweight Aluminum Intercooler 1 X 35/38mm Wastegate with Spring 1 X GT45 V-band Clamp 1 X Type-S Blow Off Valve Kit 1 X Flange Pipe 1 X Braided Oil Feed Line 1 X Adjustable Boost Controller 1 X Manifold Wrap 1 X Turbo Timer 1 X Fuel Pressure Regulator 1 X High Sensitivity Voltage Stabilizer 1 X High Conductivity Copper Ground Wire Kit 1 X 16-Row 10 AN Oil Cooler 1 X Oil Filter Relocation Kit and 3 X Oil Line 1 X Oil Drain Line 1 X Oil Catch Tank 1 X 3" Mushroom Type Air Filter 1 X Set of Aluminum Piping      Includes: 8 Pieces Aluminum Piping, 16 Clamps, 8 Silicone Hose and Necessary Hardware 2 X 180 Degree U-Pipe 2 X 90 Degree Pipe 2 X 45 Degree Pipe 2 X Straight Pipe