Replace FO4050116 - Mercury Monterey Transmission Oil Cooler Assembly

Transmission Oil Cooler Assembly (FO4050116) by Replace®, With Ambient Sensor, with Power Steering. This is an aftermarket part that replaces factory OE # 5F2Z3F749B. Modern automatic transmissions operate at extremely high fluid temperatures. If an additional cooler is plumbed into the system by the factory then that cooler must function properly for transmission fluid temperature to be maintained. If fluid temperatures rise significantly, then the fluid will degrade, and internal components like seals and clutches will eventually deteriorate to the point that the transmission fails. If your transmission oil cooler is defective, don’t pay the high price at the dealer for a replacement when you can get an OE quality unit from Replace.

Features:

• Same quality as OE for less money
• Designed with the latest software and manufactured with modern tooling
• Direct replacement
• Installs the same as factory unit
• Same dimensions as OE part
• Same gauge material as OE
• No vehicle modifications required for installation
• Backed by a limited lifetime warranty

A transmission oil cooler is a liquid-to-air heat exchanger similar to a radiator or A/C condenser. A system of tubes carrying the liquid (transmission fluid) is attached to thin metal plates called fins. The heat from the fluid is transferred to the fins where it can be removed by air passing through the cooler. Internal tube clogging, dents in the tubes, or anything that impedes the flow of fluid through the cooler, and bent fins or debris stuck in the fins, or anything that impedes airflow through the cooler, can reduce effective heat transfer and cause the fluid to overheat. Overheated transmission fluid can oxidize and lose its lubricating ability, turn to varnish and clog small transmission passages.

In the past if you needed a transmission oil cooler you had to pay for an expensive replacement from the dealer. Today you can fix your car or truck properly and have money left in your pocket with a quality replacement oil cooler from Replace. Replace offers OE quality oil coolers at less than original equipment prices. You get the same quality part that you’d get at the dealer without the high dealer price. A Replace transmission oil cooler will look, fit and function just like a cooler from the dealer, so the transmission in your car or truck will perform properly. Replace oil coolers are designed using the latest software so they exactly replicate the OE units, then they’re manufactured using the most modern tooling, so the end product looks, fits and functions exactly as designed.

Repairing your car or truck is expensive enough without paying more than necessary for quality parts. A Replace oil cooler is the sensible alternative to the high dealer price markup. A Replace oil cooler will get your car or truck operating perfectly again, without breaking the bank. Replace is so confident in the quality of its parts that they’re backed by a limited lifetime warranty against defects in materials and workmanship for as long as the original purchaser owns the vehicle on which the part is installed.

Replace® is dedicated to providing original equipment (OE) quality body parts and lights without the high OE price. Rather than deal with so-called "universal" parts that may or may not fit your vehicle, Replace sells only parts that have OE quality fit, function and appearance. They believe such parts should be affordable so you can repair your vehicle to its former state, restoring your pride of ownership and preserving its resale value. With Replace parts you can just say no to high dealer prices.