CLEAR-DIESEL Fuel & Tank Cleaner         
Fuel Polishing Formula – use to clean and maintain a fuel system.
 
Clear-Diesel Fuel & Tank Cleaner is an advanced diesel fuel and tank cleaning technology that has been proven effective in fleet, marine and agricultural applications. This Fuel Polishing Formula disperses fuel contaminants and stabilizes fuel during long-term storage. It can be used as a vital part of any preventive maintenance program or for immediate clean-up of equipment or fuel storage tanks.
 
CLEAR-DIESEL BENEFITS
·         Disperses diesel fuel contaminants
·         Removes water
·         +PetroFresh provides maximum long-term storage stability – keeps fuel fresh
·         Prevents premature fuel-filter plugging
·         Protects against fuel tank corrosion
·         In winter, prevents fuel-filter icing
·         Effective in all diesel fuels, including Ultra Low Sulfur Diesel (ULSD) fuel, biodiesel and biodiesel blends
 
PART#                       PACK                      TREATS
9225-06                6/1 32-Ounce     Up to 100 Gallons
 
DIRECTIONS:
 
Complete directions are printed on each container label.
 
CUSTOMER CONVENIENCE FORMULA – 1:400 TREATMENT RATIO
 
Part Number 9225-06
 
To clean fuel tanks and prevent premature fuel-filter plugging: If possible, pump or drain excess water and fuel contaminants from bottom of fuel tank until diesel fuel appears. If your fuel tank does not have a bottom drain, see suggested pump-out procedure detailed below. Depending on container size, add the following: 16 ounces (Part No. 9216-09) of Clear-Diesel to each 20 gallons, 32 ounces (Part No. 9225-06) to each 50 gallons or 80 ounces (Part No. 9280-06) to each 125 gallons of fuel in the tanks.
 
To maintain a clean fuel tank and stabilize fuel for long-term storage: Depending on container size, add the following: 16 ounces (Part No. 9216-09) of Clear-Diesel to each 40 gallons, 32 ounces (Part No. 9225-06) to each 100 gallons, or 80 ounces (Part No. 9280-06) to each 250 gallons of fuel tank capacity. Fill tank with diesel fuel.
 
Parts List for Do-It-Yourself Pump Out:
·         A fluid extraction pump (electric or manual) rated for use in diesel fuel
·         One 2-foot section of clear pressure braided flexible tubing — diameter to match size of pump intake
·         One 5-foot section of rigid PVC tubing to use as a probe — diameter to match clear flexible tubing

Access to the inside of fuel tanks can be accomplished through fuel fill orifices, fuel level/gauge sending units or fuel tank inspection plates.
 
Insert the rigid PVC tubing into the fuel tank until it makes contact with the bottom of the fuel tank. Initiate pump to begin pump-out. View water and other fuel tank contaminants through the clear plastic tubing. Stop pump out when clean diesel fuel appears.
 
Discard tank bottoms in a method compliant with state and federal environmental regulations.