GT45 25PC TURBO KIT TURBOCHARGER+MANIFOLD+CROSS PIPE 79-93 FORD MUSTANG 5.0L V8
ITEM SKU: TBK-SDD-TBC-GT45+TM-FM7950L-25PCTBC-GT45 TM-FM7950L WG-46-SL OFL VCF-GT45 ITCL-2004 FMICPP-U-25-ST BOV-SQV-B-SL FP-H250 BC-BK GA3PD-BK+GA-BOOST+OT+WATER-27 ADT-WATEMP-38MM WRAP-BK-15M TT-BOX-BK FPR-H-SL VS-RD OC-16R-SL OFRL+L ODL OCT-SL AF-H-3-BL
High Compression/ Boosting GT45 Oversize Turbocharger
The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.
Specifics and Benefits:
- Capable of Boosting Horse Power up to 600+ BHP
- High Quality Material, Cast Housing with Durable Steel
| Exhaust (Turbo Manifold) Flange: |
Standard T4 4-Bolt |
| Exhaust (Downpipe) Flange: |
Standard 3.25" Inner Diameter V-Band |
| Intake Inlet/ Outlet: |
3.75"/ 2.25" |
Compressor:
| Trim: |
69 |
| A/R: |
.66 |
| Inducer: |
68.70 |
| Exducer: |
97.80 |
Turbine:
| Trim: |
92 |
| A/R: |
1.05 |
| Inducer: |
87.4 |
| Exducer: |
77.00 |
High Performance Tubular Exhaust Turbo Manifold
The heart of any Turbo system is the Manifold and the Turbocharger. These form the basis where the rest of the turbo system is built around. Turbo manifolds have only one, but the most critical purpose in turbo systems, and that purpose is to expel exhaust gas into the turbine of a turbocharger as efficiently as possible.
There is no match for power and performance for tubular stainless steel manifolds. Tubular manifolds are made up of runners coming from each cylinder, meeting up at a collector. Tubular manifolds yield a higher efficiency rate, as each runner is generally the same circumference. This allows for a much smoother flow of exhaust gas to the turbo.
Tubular stainless steel manifolds are chosen over cast manifolds for big power applications. Tubular stainless manifolds feature better and more consistent flow of exhaust gases. Most of the tubular Stainless manifolds also feature the placement of the wastegate flange towards the middle of the collector to allow accurate readings and precise control.
Specifics and Benefits:
- High Performance Tubular Turbo Racing Design
- Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability
- Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder
- Computerized Mandrel-Bended to Maximize Air Flow Smoothness
- TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing
- Increase Engine Exhaust Output and Efficiency
- 44mm External Wastegate Port and Flange Included
- Standard T4 Configuration Outlet
Lightweight Stainless Steel Cross Pipe
Specifics and Benefits:
- Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends
- i.e. Maximizing Smoothest Exhaust Airflow
- High Performance Racing Spec. Design
- TIG Welded CNC Machine Flange for Strength and Durability
- Inlet Sizes: 3.75" (Pipe 1)/ 3.25" (Pipe 2)
- Outlet Sizes: 2.50" (Pipe 1)/ 3.00" (Pipe 2)
- Piping Diameter: 2.50" (Both)
- O2 Sensor Bung and Flexpipe Insertions on Cross pipe 1
- 44mm Wastegate Bung on Cross pipe 2
- Increases Engine Output and Efficiency
- Instantly Gains 10 - 15 HPs
- Direct Bolt-On Installation, Requires NO Modification
Universal Lightweight Aluminum Bar and Plate Front-Mount Intercooler
When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.
Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.
Specifics and Benefits:
- High Performance Bar and Plate Turbo Racing Design
- Made of High Quality T-6061 Aluminum Durable Material
- Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level
- Intercooler Size: (24.50" Including Piping) 22.25" (L) X 10.75" (H) X 2.50"(W)
- Core Size: 17.75" (L) X 10.50" (H) X 2.50"(W)
- Inlet/ Outlet : 2.00"/ 2.00”
- Inlet/ Outlet Inner Diameter: 1.75"/ 1.75”
Universal Aluminum Intercooler Piping
Specifics and Benefits:
- Made of High Quality T-6061 Lightweight Aluminum Piping
- Powder-Coated Surface Finish
- 2.50" Piping Diameter
- Increase 65% Air Flow comparing with other Standard Piping
Adjustable Billet Aluminum Blow Off Valve BOV
The Blow-Off valve (BOV) is a pressure relief device on the intake tract to prevent the turbo’s compressor from going into surge. When the throttle is closed rapidly, the airflow is quickly reduced, causing flow instability and pressure fluctuations. Surge can eventually lead to thrust bearing failure due to the high loads associated with it. Blow-Off valves use a combination of manifold pressure signal and spring force to detect when the throttle is closed. When the throttle is closed rapidly, the BOV vents boost in the intake tract to atmosphere to relieve the pressure, helping to eliminate surge.
Specifics and Benefits:
- Billet Aluminum Body with Anodized Finish
- Draw In Surrounding Air and Release a Unique Discharge Sound
- High-Quality Diaphragm and Short Stroke Significantly Increase Response
- Dual Spring System Promoted Response and Allows for High Boost Pressures
- Holds Up to 30 PSI Boost Pressure
- 2 Bolt Mounting Design
Aluminum 2.5” Flange Pipe
Specifics and Benefits:
Fits SSQV Dump Pipe Flange
Construction Prevents Warping due To High Heat
Made of High Quality T-6061 Aluminum, Lightweight Design
2.50" Pipe Size
Universal 46mm Wastegate with Spring
Wastegates provide a means to control the boost pressure of the turbo charged engine. Wastegates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level. Similar to the BOV, the Wastegates uses boost pressure and spring force to regulate the flow bypassing the turbine.
Wastegates are bolted to exhaust manifold or header. The advantage of external Wastegates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.
Specifics and Benefits:
High Strength Cast Steel Body with Steel Head
Comes with 12-PSI Spring Installed
30 PSI Turbo Boost Controller
Specifics and Benefits:
CNC Machined Aluminum Body
1-30 PSI Adjustable
Stainless Steel Braided Oil Feed Line
Oil feed lines and returns lines are an essential part of any turbo system. Oil feed lines bring oil to the turbocharger, at the same time the oil cools and lubricates the moving parts. The Oil Drain Lines take the oil that has passed through the turbo and guides it back into the engine’s oil pan. Without these two components, the turbocharger’s internals would overheat or seize causing major complications.
Specifics and Benefits:
Made of High Quality Stainless Steel Hose
10AN Fittings Anodized Ends
Inner Diameter: 0.25"
Length: 36.00"
1/8 NPT Fittings Natural Polish Finish
CNC Machined Turbo Adapter Plate
Brass Fitting, Block Fitting, and Port Cover Included
Universal Box Style Programmable LED Turbo Timer
Specifics and Benefits:
Allows the Vehicle to Idle the Engine, for the Timed Period, with the Ignition Key Removed
Auto Mode - Precise Calculation of Cool Down Period to Ensure Proper Cool Down of Turbo-Charged Engine.
Digital Display - Allowing Clear Vision during Day & Night Time.
Universal Adjustable Fuel Pressure Regulator
Specifics and Benefits:
Adjustable from (1-15) psi to 140 Maximum Fuel Pump Capacity
Improves Fuel Delivery Efficiency and Prevents Fuel Starvation for More Consistent Boost and Fuel Flow
Designed to Maintain the Optimal Fuel Rail Pressure for High Performance/ Turbocharged Engine
Delivers Vehicles’ Highest Performance, with Long Life and Highly Reliable Operation
Comes with Hose, Bolts, Connectors and Installation Kits
Universal Voltage Stabilizer/ Regulator
Specifics and Benefits:
Improves Ignition Flow and Strengthens Starting Power
Stabilizes Voltage, Improves Engine Performance
Specially Designed with High Water and Heat Resistance
Universal 16-Row 10 AN Oil Cooler
Specifics and Benefits:
Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials
Made with High Quality T-6061 Aluminum
Potentially Reduces Oil Temperature up to 50°F
Overall Size: 13.00" x 6.00" x 2.00"
Core Size: 9.25" x 5.00" x 2.00"
Inlet / Outlet Size: 10 AN
Oil Filter Relocation and Oil Line Kits
Specifics and Benefits:
Made of High Quality Lightweight Aluminum with CNC Laser Cut
Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines
Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters
10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern
Billet Aluminum Oil Catch Tank
Specifics and Benefits:
Clear Tube Indicator for Easy Visual of Checking if the Tank is Full
Ensure Better Mileage, Better Performance and Preserve Engine Life
Catch Oil and Sludge to Save the Life of the Engine
Universal 3-Port Gauge/ Meter Dash Pod
Specifics and Benefits:
Dimensions: 9.25” (Length) X 4.50” (Width) X 3.00” (Height)
Flatten Bottom Surface for Easy Direct Hood Mount or Stick Mount
2.0625” (Diamter) X 2.50" (Depth) Pods
Universal Smoke-Tinted Turbo Boost + Oil Temperature + Water Temperature Gauges
Specifics and Benefits:
Enchanting 7-Color LED Display, to Match Interior Lightings at its Best
Stylish Smoke-Tinted Screens
2” Gauge Diameter for 12V Power Source
Universal Aluminum Radiator Water Temperature Gauge Adaptor
Specifics and Benefits:
Made of High Quality Light Weight Aluminum Material
Port Diameter: 38mm/ 1.50"
Overall Dimensions: 2.75" (Length) X 2.25" (Height)
Sensor Port Thread Pitch and Diameter: 1/8 NPT/ 6AN
3.00” Universal Mushroom Type Air Filter
Specifics and Benefits:
Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability
3.00” Filter Inlet, 3.00" Inner Diameter Pipe
Performance: Improves Up to 95% Filtration Efficiency
Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable
Universal Braided Stainless Steel 10AN Oil Drain Line
Specifics and Benefits:
Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length
10AN Fittings Anodized Finish
Weldable 10AN Oil Pan Fitting Included
High Tolerance Manifold Wrap
Specifics and Benefits:
Made of High Quality Synthetic Fabric Material
Tested to Tolerate Extreme Heat and Wearing Corrosions
Dimensions: 2.00" (Width) X 1/16" (Thick) X 600"/ 50' (Length)
Stainless Steel GT45 V-Band Clamp
V-Band Clamps makes it easy to install and remove exhaust systems and turbo parts, such as downpipes, B Pipes and the like. Great for racers and tuners, these clamps make it easy to remove parts to gain access to vital componenets easily as there are no hard hard to reach bolts or special tools needed. Simply undo the clamp and you can remove the component easily
Specifics and Benefits:
Made of High Quality T-304 Mild Steel Durable Material
CNC Machined Stainless Steel Flange
Inlet Flange Inner Diameter: 3.25"
Overall Clamp Width: 4.25"
Direct Bolt-On, High Performance Use
Universally Fits GT45 Turbochargers
* Professional Installation Highly Recommended! No instructions included! *
| DOMESTIC LOWER 48 US STATES: |
$0.00 |
| AK / HI / PR / PO BOX: |
$299.98 |
| CANADA: |
$299.98 |
| REST OF THE WORLD: |
$798.98 |
| SALES TAX: |
CA ONLY |
Shipping Information:
- VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.
- Please use Shipping & Payments tab on top of page for shipping details for your location.
- Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.
- For Canada shipping please select the lowest price. We do not offer expedited shipping.
- US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.
- Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.
- Customer assumes shipping charges incurred in shipping to undeliverable address.
- International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.
- We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.
- We are not responsible for any changes to address after item has been shipped.
|
Return policy:
- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your eBay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in re-sellable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.
Terms & Conditions:
- For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
- All items do not come with installation instruction unless otherwise specified.
- If item is questionable, please consult your local professional/mechanic before making purchase.
Contact:
- Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.
|
  | |
|
