Get Your High Quality Nitro-Prop Gas filled struts here!

WHY PAY MORE?

Unlike Many Sellers we carry an extensive line of end fittings, mounting brackets and ball studs for our struts

MORE Gas springs listed in our Store

If you do not find the size, length or configuration you are in need of please e-mail us as we have most all the gas struts / springs that are / were used by WRV, Marathon, Beaver, Safari, Winnebago, Keystone and more. And they fit campers, car and truck hood lifts, Rear glass lifts, toppers and more!

Fully extended … 11.9 inches … Fully retracted … 7 1/2 inches (center to center of the ball socket)

Diameter rod = 8mm / tube = 18mm

End thread = M6 x 1, Ball size =10mm

20 pound force at rest (full extension)

You are bidding / buying (1ea) gas spring / shock / strut Manufactured for Nitro-Prop Strut and Spring (NP1190-20-8) this unit is totally self-contained, hermetically-sealed, a hydro pneumatic linear actuator containing pressurized nitrogen gas, which provides the output force.

This unit and comes complete with threaded removable 10mm ball sockets both on the rod and tube ends (if you are in need of mounting brackets see our selection listed in the store)

The shipping and handling is a set cost of $6.90 (postage + partial packing cost) for the first and 1.00 for each additional (multiple items may be shipped USPS or FedEx depending weight and destination)   We ship to the USA only

Discount Shipping - We are happy to discount shipping on multiple lots or when purchasing from multiple auctions to provide the buyer the best shipping rates when ever possible. PLEASE ask for an invoice to get combined shipping. FAILURE TO WAIT FOR INVOICE WITH COMBINED SHIPPING WILL RESULT IN LOSS OF COMBINED SHIPPING DISCOUNT- eBay has no option to allow sellers a refund for S&H fees once paid (Shipping charges will not be adjusted after payment has been received.)

Replacement TIP: There are many brands of gas springs / shocks / struts manufactured today with just about as many names Nitrogen gas, gas, struts, springs, shocks, dampers etc. , some have a part number that is as equally confusing to understand with out a reference guide! If you are looking to add or replace any gas shocks (they all get weak, worn, bent or broken and need to be replaced at some time) it is easier than you think, here are the basics

1.     Just measure the extended length of your shock (from the center of the socket to the center of the socket) that’s the length (that was easy!)

2.     if you do not know the force pressure, and it is not listed on the shock (most times it is encoded in the part number on the shock) you can always do a simple test, IE camper topper lid … use a scale to measure the force needed to open the door! That will get you really close

3.     Shocks can come in the same length and force pressure but different in physical size (rod diameter / tube diameter- 6x15 / 8x18 / 10x22 / 14x28 MM etc) I think of the physical size in terms of ratings … standard duty (6x15mm) … heavy duty (8x18) … extra heavy duty (10x22), and when nothing else will do use the maxi 14x22MM

4.     Mounting brackets / studs can be permanent or replaceable the most common are the ball and socket style (10mm or 13MM) then the ring / eye style. Most shocks come with threaded ends to allow for interchangeable configurations. If you have the option I like to use the ball and socket when ever adding a shock as it is much more flexible then the ring / eye style.

Removal TIP: it is very easy to replace most gas springs / shocks/ struts, the most common connection used is the nylon “ball joint socket” to remove your old unit simply insert a “flat” blade screwdriver under the spring clip (you do not have to remove the clip) using the slot provided in the back of the socket, push the screwdriver down just a bit this causes the spring clip to open and it will release the ball end. The new unit now just “pushes” on and snaps in place, that’s it you’re done!

Happy Bidding!

Thank-you for your interest

Please see the pictures, and READ the description do not assume you are getting more than I have listed, I sell parts and pieces, some complete sets while other items may just be a single replacement / repair part, items may or may not come with installation instructions, box, or all parts / pieces (if it is not in the pictures it is not included!). If in doubt please ask questions before bidding.

Please click the ICON ME next to RV-Trader, this tells a bit about me and the items that will be up for auction. Please be patient for answers to your e-mails, as I do not get to work eBay full time. Please be sure to check out our other auctions, click view sellers other items.

Many of our RV items only get listed in our store and yes we are open to offers!

Be sure to check out our store items, and sign up for the STORE news letter (just click on the “sign up” button in the top right hand side of this page) as we do mark down items just to see who is watching … you will be surprised as to what those prices will be, but they only stay on sale for a short time so be sure to watch your e-mail for the notifications!

Watch for MORE items from RV-Trader to come!