Aftermarket Single DIN Radio Install Dash Kit with GM Class II Radio Replacement & OnStar Retention Interface and Antenna Adapter.

Steering Wheel Control Adapter Built into CRUX Interface (Limited to Pioneer, Alpine, Clarion, Dual, Jensen, JVC, Kenwood and Sony Radios Only). Works with Vehicles Equipped with Digital Signals ONLY, NOT all Vehicles will work, "PLEASE" Check EBAY Compatibility Chart Above for Your Specific Vehicle.


EXPLANATION OF MOUNTING TYPES :

OEM Radio :	This is "NOT COMPATIBLE" when installing a Factory (OEM) Radio or attempting a Factory (OEM) Radio Swap.
Single-Din:	This is "COMPATIBLE" when installing an Aftermarket DIN Size Radio "WITH" the use of a RADIO SLEEVE or CAN (included with your radio). A Single DIN radio is approximately 7 x 2 inches in size.
ISO-DIN:	This is "NOT COMPATIBLE" when installing an Aftermarket DIN Size Radio "WITHOUT" the use of a RADIO SLEEVE or CAN. Unit is screw mounted using the mounting holes on the side of the radio chassis.
Stacked ISO-DIN	This is "NOT COMPATIBLE" when installing (2) stacked ISO-DIN Radios together. Radios are screw mounted using the mounting holes on the side of the radio chassis.
Double-Din	This is "NOT COMPATIBLE" when installing an Aftermarket DOUBLE-DIN Size Radio. A Double-DIN or sometimes referred to as a 2-DIN or D-DIN is approximately 7 x 4 inches in size.

The CRUX SOOGM-15 Radio Replacement Interface Performs The Following:

Retains Factory OnStar System Functionality
Provides An Accessory Lead Behind The Radio (Not Found With Factory Wiring)
Retains All Safety And Warning Chimes
Provides An Illumination Output
Provides Low Voltage (Battery Run-Down) Protection
Works With Both Standard And "BOSE" Amplified Factory Systems (EXCEPT THOSE LISTED IN THE COMPATIBILITY SECTION ABOVE). Vehicles Equipped With A Factory "Y91" Premium BOSE Amplifier Will LOSE The Ability To Fade From Front To Rear.
Retains Factory Steering Wheel Controls In Vehicles Equipped With Digital Signals Only (NOT all Vehicles Will Work, Please Check Compatibility Chart Above for Details). Works with Select Aftermarket Radios Equipped with 3.5mm Remote Control Input (Limited to Pioneer, Alpine, Clarion, Dual, Jensen, JVC, Kenwood and Sony Radios Only).

The Antenna Adapter pictured may vary depending upon availability. It is an Economical Brand (Provided by CRUX) guaranteed to work with the vehicles specified in the Compatibility Section of this listing or you can return it for a full refund. Please be sure to read the section below and the notes carefully, we try our best to let you know in advance of any compatibility issues with any radio(s), brands and/or vehicles.

Aftermarket Kits are "NOT COMPATIBLE" with with an OEM Radio or OEM Radio Swap.

Vehicles Equipped With A Factory "Y91" Premium BOSE Amplifier Will LOSE The Ability To Fade From Front To Rear.

This Interface Retains Steering Wheel Controls on Most Vehicles (EXCEPT Those Listed In The Compatibility Notes Section).

For SINGLE-DIN Installations (Unit is mounted with a SLEEVE or CAN provided with the new radio).

Kit comes with Instructions for Removing the Factory Radio.

We accept Paypal payments.

INTERNATIONAL BUYERS (ANYONE OUTSIDE THE U.S.A.):

All parts we sell are made for U.S. VEHICLES ONLY. Although many parts are compatible with vehicles outside the U.S., it is the BUYER'S Responsibility to determine whether the part they are ordering will work with their vehicle. Please research this information before ordering any parts as we cannot be responsible for the compatibility, fitment or matching finish of any vehicle outside the U.S.A.

INTERNATIONAL SHIPPING (ANY PACKAGE SENT OUTSIDE THE U.S.A.):

International Shipping is via United States Postal Service. Tracking is not available for First Class Mail or Most Priority Mail International Shipments (Excluding Canada, all shipments to Canada are trackable). If you are concerned about this, please inquire about Express Mail International Service, this is the only service that will provide any type of tracking information.

Shipping is via United States Postal Service. We offer 3 types of shipping, please see shipping details below. All 3 services are trackable at the United States Postal Service Website. You will automatically receive tracking information via email the following business day. If you did not receive this email, please check your spam folder, this is automatically sent via Paypal upon printing of shipping label.

International Shipping is via United States Postal Service. Tracking is not available for First Class Mail or Priority Mail International Customers. If you are concerned about this, please inquire about Express Mail International Service, this is the only service that will provide any type of tracking information.

When making multiple purchases, please do not pay until we combine them together and send you an invoice with a combined shipping discount.

We guarantee your purchase to be as described and shown above. Should you receive any product which does not work or is not represented properly we will gladly refund your purchase including shipping. Kindly contact us with any questions or problems so we can address your concerns immediately. We can be reached using Ebay's Message System or you can call us at 310.505.6360. We want you to be completely satisfied with your purchase.

(1) SCOSCHE GM1583B Radio Dash Panel
(1) Optional ISO Look Trim Ring
(2) Spacers
(1) Rear Support
(2) Mounting Hardware (Bolt and Nut)
(4) Mounting Hardware (Philips Pan Head Screws
(1) CRUX SOOGM-15 GM Class II Radio Replacement & OnStar Retention Interface
(1) Antenna Adapter (Economical Brand)
(1) Instruction Manual

VSS Wire Is Only For The "Y91" Premium BOSE Systems (Note: "Y91" Code can be Found in the Service Parts Sticker Located in the Glove Box).