KEY STRENGTHS:

The NEW DIGITAL PH METER is a less expensive, slick and stylish handy meter that comes with a large and easy to read display system. A 1m cable from meter to sensor and an easy operation-switch-button are provided for easy installation and usage. A mini-screw driver (trimmer) is supplied for easy calibration of the pH Meter as well as the four (4) 1.5V batteries for easy mobility and less hanging wires in you aquarium area.

You can rely on with its 100% accurate and stable reading. Use PH-025 to monitor the pH level of any type of water digitally.

The Digital pH Meter is not just for aquarium it can also be used in swimming pool, spa, laboratories and hospitals. Determining pH level has never been this easy!

Save more with our Digital PH Meter! It's durable and built to last long, measures with accuracy and preciseness and very reliable indeed!

Buy Now!

 

Features: This device is very effective, reliable, easy and safe to use.

• Comes with free 2 bottles of Calibration Solutions (PH4.003 & PH6.864)
• Have reliable, stable and fast reading with 1 metre cable from meter to sensor
• Easy operation with its switch button
• User-friendly and easy to install with its step-by-step operating information
• Has a 4-digital LCD for ease of reading
• Four (4) 1.5V batteries are provided for a clean, wireless environment and ease of carrying anywhere
• A mini-screw driver is also provided to fine-tune the reading to standard calibration
  

Specifications:

• Measuring Range:  0.00~14.00pH
• Resolution:  0.01pH
• Accuracy:  ±0.1pH (at 20°C or 68°F)
• Batteries:  4 X 1.5 V (AG13 Button Battery)
• Environment Temperature:  0 - 50°C (32 -122°F)
• Dimensions:  60mm x 55mm x 23mm
• Calibration:  Manual, miniscrew driver provided
• Weight:  75g
• Power Supply:  1.5V Batteries x 4

Accessories included:

• FREE 1 x PH4.003 Buffer (calibration) solution
• FREE 1 x PH6.468 Buffer (calibration) solution
• FREE 4 x 1.5V AG13 Button Battery
• Operations manual
• Miniscrew driver

Operating Information:

• Remove the protective cap.
• Rinse first the electrode with the distilled water, and wipe it carefully with filter-paper.
• Check the battery arrangement at the battery compartment located at the back of the meter. Make sure that the battery matches the correct polarity.
• Press the ON/OFF switch to turn on the meter.
• Immerse the sensor electrode in the solution to be tested and wait for the reading to stablilize.
• Clean and dry the sensor electrode before placing in the storage.
  
  

Warranty: 2 years warranty

All our products are manufactured under the strict quality control guidelines established by EN ISO9001-2000 Standards