Stock # 204A

One (1)

New O.E.M. Original Equipment Manufacturer Factory

 remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

Item #: 205A-B
FCC ID: GQ43VT4T TRW 3165189
Part #: DEALER PART#: F6UZ15K601AB, F6UZ-15K601-AB
Canada/Mexico Part #: DOC: 1470K763, DOC: 1470 K763,
IC: 1470-K763
FREQUENCY: 315MHz 315 MHz

WORKING BATTERY INSTALLED

   BEFORE YOU BUY PLEASE READ.…

This is a NEW Factory Original Equipment O.E.M.
keyless remote control transmitter.

Remote / Battery Specifications


Condition:NEW
Battery:
Yes, Installed
Required batteries:

 2: CR2016
  
Buttons: 3: Lock, Unlock, Panic
Frequency: 315 MHz (315MHz)

Compatible

Vehicles*:

 

1993 1994 1995 1996 1997 Ford Aerostar Van

1994 1995 1996 Ford Bronco SUV

1992 1993 1994 1995 1996 1997 1998 Ford E-Series Econline Van (E150, E250, E350, E450, E550)

1997 Ford Expedition SUV

1993 1994 1995 1996 1997 Ford Explorer SUV

1994 1995 1996 1997 Ford F150 Pickup Truck

1994 1995 1996 1997 Ford F250 Pickup Truck

1994 1995 1996 1997 Ford F350 Pickup Truck

1994 1995 1996 1997 Ford F450 Pickup Truck

1994 1995 1996 1997 Ford F550 Pickup Truck

1993 1994 1995 1996 1997 Ford Probe Coupe

1995 1996 1997 Ford Ranger Pickup Truck

1995 1996 1997 1998 Ford Windstar Minivan

1997 Lincoln Navigator SUV

1994 1995 1996 1997 Mazda B-Series Pickup Truck

1993 1994 Mazda Navajo SUV

1997 Mercury Mountaineer SUV
 

*All vehicles with factory installed Remote Keyless Entry (RKE).

 

All of our keyless remotes are listed just as the manufacturer states for make model & year compatibility  -

 ** SOME VEHICLES HAVE KEYLESS SYSTEMS INSTALLED THAT HAVE STANDARD PACKAGES & SOME ARE OPTIONAL (DEALER INSTALLED)

**(this can change what remote FCC ID &/or part will be compatible with your system)

** WE ASK THAT YOU VERIFY w/ A DEALER PRIOR TO PURCHASE AS TO WHAT FCC ID # YOU NEED FOR YOUR VIN

MAKE/MODEL

YEARS

Ford Explorer SUV

PROGRAMMING INSTRUCTIONS 1993 1994

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located in LR quarter panel area (Connector will not be plugged into anything, it will have two pins inside it, if you have to unplug it you have the WRONG one. Not all vehicles are set up from factory for keyless remotes)  All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm program

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

PROGRAMMING INSTRUCTIONS 1995 1996 1997

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with  5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Ford f SERIES f-Series

Remote Programming 1994 1995 1996

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located at the base of the steering column. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.

5. Turn igniton to OFF. Locks will again cycle to indicate end of programming mode

PROGRAMMING INSTRUCTIONS 1997

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with  5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1994 1995 1996 1997

94 95 96 97

All Models With Keyless Entry

Ford F-150 F-250 F-350 F150 F250 F350 truck Ford f SERIES f-Series

Remote Programming 1994 1995 1996

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located at the base of the steering column. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

PROGRAMMING INSTRUCTIONS 1997

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with  5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1994 1995 1996 1997

94 95 96 97

All Models With Keyless Entry

Ford Expedition

PROGRAMMING INSTRUCTIONS

** A max of 4 remotes can be programmed

** Any existing remotes need to be reprogrammed along with new remote!!

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1997 97

Lincoln Navigator

PROGRAMMING INSTRUCTIONS

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm program4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1997 97

Ford Econoline

Programming instructions 1992

1. Turn ignition to RUN or ACC.

2. Jump pins in programming connector located at the base of the steering column for entire programming procedure. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Doors locks will cycle to confirm programming.

4. If programming second keyless remote press any button on it and door locks will cycle to confirm programming.

5. Turn ignition to OFF. Door locks will cycle to indicate end of programming mode. 6. Remove jumper wire in programming connector.

 

Programming instructions 1993 – 1998

1. Turn ignition to RUN or ACC.

2. Jump pins in programming connector located at the base of the steering column for entire programming procedure. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Doors locks will cycle to confirm programming.

4. If programming second keyless remote press any button on it and door locks will cycle to confirm programming.

5. Turn ignition to OFF. Door locks will cycle to indicate end of programming mode.

6. Remove jumper wire in programming connector.

1992 1993 1994 1995 1996 1997  1998.5

92 93 94 95 96 97 98.5

All Models With Keyless Entry

Ford Bronco SUV

Ford Bronco

PROGRAMMING INSTRUCTIONS

- A max of 4 remotes can be programmed

1.        Gather all remotes.

2.        ACCESS PROGRAM CONNECTOR TAPED TO THE WIRING HARNESS NEAR TO THE CENTRAL LOCKING CONTROL MODULE LOCATED BELOW THE LH FASCIA.

3.        Switch the ignition from off to ON

4.        MOMENTARILY JUMP PROGRAM CONNECTOR

5.        ….The doors should lock then unlock

6.        REMOVE JUMP WIRE FROM PROGRAM CONNECTOR

7.        PUSH  any button on first remote

8.        …The doors should lock then unlock

9.        PUSH any button on second remote

10.     …The doors should lock then unlock

11.     PUSH any button on third remote

12.      …The doors should lock then unlock

13.      PUSH any button on fourth remote

14.      …The doors should lock then unlock

15.      NOTE…if…door locks don’t operate: Wait a few seconds and then push the remote button again UP TO A MAXIMUM OF 3 TIMES.

16.     turn ignition to off position \

Doors should lock and unlock (remote is programmed)

1994 1995 1996

94 95 96

All Models With Keyless Entry

Ford Ranger Truck

PROGRAMMING INSTRUCTIONS

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm program.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1995 1996 1997

95 96 97

All Models With Keyless Entry

Mercury Mountaineer

Remote Programming 1993 1994

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located at the base of the steering column. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

PROGRAMMING INSTRUCTIONS 1995-1997

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with  5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Ford Probe

PROGRAMMING INSTRUCTIONS

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located in right rear quarter panel area. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Ford Windstar Minivan Van

1995 1996 1997 programming instructions

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located behind glove box. All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.  Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1998.5 programming instructions

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1995 1996 1997 1998 (not 1998.5)

95 96 97 98 (Not 98.5)

All Models With Keyless Entry

All of our keyless remotes are listed just as the manufacturer states for make model & year compatibility  -

 SOME VEHICLES HAVE KEYLESS SYSTEMS INSTALLED THAT HAVE STANDARD PACKAGES &

SOME ARE OPTIONAL (DEALER INSTALLED)

**(this can change what remote FCC ID &/or part will be compatible with your system)

** WE ASK THAT YOU VERIFY w/ A DEALER PRIOR TO PURCHASE AS TO WHAT FCC ID # YOU NEED FOR YOUR VIN

 

STOP!

 Before You Buy Please Read…

Program Remote To Your Vehicle

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:

1.   Some years require diagnostic programming according to how the manufacturer set the system

         a.   Free programming Requirements per manufacturer upon request

         b.  Contact  us via  eBay messages (Keyless4u store) Prior to Purchase  

with  your vehicle’s ….

1.  Make

2.  Model

3.  Year

2.  We will respond via eBay messages with the manufacturer’s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool – we do not write the programming – we pass it on to you as a courtesy.

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

 

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

 

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Shipping & Handling

Combined Shipping & Handling Discount (multiple item purchase discount):

S&H discount = the price of the 1ST remote’s S&H  + 1.99 each additional remote’s  S&H 

Shipped From: Pennsylvania, USA

Shipping Method: USPS mail service

USA Shipment Options:

   ◊ USPS 1ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS EXPRESS class mail service

Canadian Shipment Options:

   ◊ USPS 1ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Worldwide (Outside of  USA & Canada) Shipment Options:

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

5.      All cut keys are subject to a $20 deduction from the refund

 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

  Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

WORD KEY: