This item is pre-owned – it will work like new once programmed to your vehicle

This system is capable of being operated by as many as four controllers or transmitters; these can be any combination of 1-way transmitters or 2-way controllers. Regardless of which, the transmitter or transceiver must be encoded, or programmed, to the system in order to operate it (excepting the originals, which were programmed at the factory).

The programming procedure is identical for a transmitter or for a controller. Also, it is during the controller/transmitter programming procedure that the Unauthorized Transmitter Alert feature may be turned on.

How to Program Controllers or Transmitters Standard Programming:

Using this method to program additional or replacement controllers or transmitters does not affect Unauthorized Transmitter Alert

Step 1

Have all controllers and/or transmitters which are to operate the system at hand. Turn the ignition “on”.

Step 2

Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. The siren will briefly sound, confirming that for the next 10 seconds the system is ready to learn a controller/transmitter code. To enter a code, simply press and release the “arm/lock” button (the button which is designed to arm the system). When the first controller/transmitter code is learned all existing stored codes will be erased.

Step 3

Press the “arm/lock” button on each remaining controller or transmitter. The system will chirp the siren once to confirm that each was learned. The controller or transmitter’s other three button's functions will automatically be assigned when the “arm/lock” button is learned. If a code is not received within a 10 second period, the learning process will automatically terminate, as indicated by another siren burs

If the Unauthorized Transmitter Alert feature is on, programming a controller or transmitter to the system will activate the Unauthorized Transmitter Alert warning and the extended Status Light visual display; for the next 48 hours the siren will sound a brief series of chirps every time the vehicle’s ignition key is turned on. The following special procedure programs the controllers/ transmitters and also turns the Unauthorized Transmitter Alert feature.

Special Programming procedure to turn On the UTA feature:

Using this method to program controllers or transmitters, and to turn on or turn off the Unauthorized Transmitter Alert feature.

Follow the same steps as the Standard Programming, but on any controller/transmitter being programmed instead of pressing the “arm/lock” button, press the “arm/lock” and the “disarm/unlock” buttons together. This action turns on the Unauthorized Transmitter Alert feature and at the same time programs the controller/transmitter to operate the system.

Once the Unauthorized Transmitter Alert feature is turned on, the warning will sound for 48 hours after any controller or transmitter programming, including the programming session which was used to turn it on

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:

1. PLEASE REFER TO YOUR ORIGINAL OWNER’S GUIDE FOR YOUR AFTERMARKET INSTALLED KEYLESS ENTRY SYSTEM OR

Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days.

PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

S&H discount = the price of the 1^ST remote’s S&H + 1.99 each additional remote’s S&H

3. Please contact us before returning items so we can give you the RMA # and the proper return address.

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

B. Installed batteries are not tested for battery life- they are simply working.

c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.

The above information can change which remote you need
for your installed remote keyless system.