Stock # 204 E MUSTANG EMBLEM

This item is pre-owned – it will work like new once programmed to your vehicle

One (1)

O.E.M. Original Equipment Manufacturer Factory

 remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed
Item #: 204 A-F
FCC ID: GQ43VT4T TRW 3165189
Part #: DEALER PART#: F5DZ15K601B, F5DZ-15K601-B
Canada/Mexico Part #: DOC: 1470K763, DOC: 1470 K763,
IC: 1470-K763
FREQUENCY: 315MHz 315 MHz

WORKING BATTERY INSTALLED

  BEFORE YOU BUY PLEASE READ …

This is a USED Factory Original Equipment
 O.E.M. keyless remote control transmitter.

Remote / Battery Specifications


Condition:Pre-Owned
Battery:
Yes, Installed

Required

Batteries:


 2: CR2016 
  
Buttons: 4: Lock, Unlock, Trunk, Panic
Frequency: 315 MHz (315MHz)

COMPATIBLE VEHICLES*:

 

1995 1996 1997 1998 1999 2000 Ford Contour

1993 1994 Ford Crown Victoria

1997 Ford Escort

1994 1995 1996 1997 1998 Ford Mustang

1993 1994 1995 1996 1997 Ford Taurus

1993 1994 1995 1996 1997 Ford Thunderbird

1992 1993 1994 Lincoln Continental

1993 1994 1995 1996 Lincoln Mark Series

1993 1994 1995 1996 Lincoln Mark VIII

1992 1993 1994 Lincoln Town Car

1993 1994 1995 1996 1997 Mercury Cougar

1993 1994 Mercury Grand Marquis

1995 1996 1997 1998 1999 2000 Mercury Mystique

1993 1994 1995 1996 1997 Mercury Sable

1997 Mercury Tracer



MAKE/MODEL

YEARS

Ford Taurus

. PROGRAMMING INSTRUCTIONS

1 Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Mercury Sable

PROGRAMMING MERCURY SABLE

All remotes must be reprogrammed at same time  if not – previously programmed remotes will become inactive

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located in LR quarter panel area (Connector will not be plugged
     into anything, it will have two pins inside it, if you have to unplug it you have the WRONG one. Not all vehicles
     are set up from factory for keyless remotes)  All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Ford Thunderbird

PROGRAMMING INSTRUCTIONS

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector (Connector will not be plugged in to anything
     it will have two pins inside it, if you have to unplug it you have the WRONG one. Not all vehicles
     are set up from factory for keyless remotes) located in left rear quarter panel area.
    All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode          

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Lincoln Town Car

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located behind glove box.
    All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1992 1993 1994 92 93 94

All Models With Keyless Entry

Ford Mustang

PROGRAMMING INSTRUCTIONS

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located in left rear quarter panel area.
    All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1994 1995 1996 1997  1998

94 95 96 97 98

All Models With Keyless Entry

Lincoln Continental

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located behind glove box.
    All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn igniton to OFF. Locks will again cycle to indicate end of programming mode

1992 1993 1994

92 93 94

All Models With Keyless Entry

Ford Contour

PROGRAMMING INSTRUCTIONS

1. Ford-Lincoln-Mercury Keyless Remote Programming

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located behind glove box.  
    The horn will chirp to confirm programming mode.

3. Press any button on first keyless remote. The horn will chirp to confirm
    programming.

4. Press any button on second keyless remote. The horn will chirp to confirm
    programming.

5. Turn ignition OFF. the horn will chirp one last time to indicate end of
    programming mode.

1995 1996 1997 1998 1999 2000

95 96 97 98 99 00

All Models With Keyless Entry

Mercury Mystique

PROGRAMMING MERCURY

1. Turn ignition to RUN or ACC

2. Momentarily jump pins in programming connector located behind glove box. The horn will chirp to confirm programming mode.

3. Press any button on first keyless remote. The horn will chirp to confirm programming.

4. Press any button on second keyless remote. The horn will chirp to confirm programming.

5. Turn ignition OFF. the horn will chirp one last time to indicate end of programming mode.

1995 1996 1997 1998 1999 2000

95 96 97 98 99 00

All Models With Keyless Entry

Mercury Cougar

PROGRAMMING 

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located in LR quarter panel area (Connector will not be plugged
     into anything, it will have two pins inside it, if you have to unplug it you have the WRONG one. Not all vehicles
     are set up from factory for keyless remotes)  All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1993 1994 1995 1996 1997

93 94 95 96 97

All Models With Keyless Entry

Ford Crown Victoria

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located behind glove box. All doors will lock then
    unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote. Door locks
    will cycle to confirm programming.

5. Turn igniton to OFF. Locks will again cycle to indicate end of programming mode.

1993 1994

93 94

All Models With Keyless Entry

Mercury Grand Marquis

1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located behind glove box.
    All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.
    Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1993 1994

93 94

All Models With Keyless Entry

Ford Escort

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending
     in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle
    to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will
    cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode

1997 97

All Models With Keyless Entry

Mercury Tracer

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending
     in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle
    to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will
    cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

1997 97

All Models With Keyless Entry



STOP!

 Before You Buy Please Read…

 

Program Remote To Your Vehicle

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:

1.   Some years require diagnostic programming according to how the manufacturer set the system

         a.   Free programming Requirements per manufacturer upon request

         b.  Contact  us via  eBay messages (Keyless4u store) Prior to Purchase  

with  your vehicle’s ….

1.  Make

2.  Model

3.  Year

2.  We will respond via eBay messages with the manufacturer’s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool – we do not write the programming – we pass it on to you as a courtesy.

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

 

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

 

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

 

100% Guarantee Remote Shipping / Return Policy

Shipping & Handling

Combined Shipping & Handling Discount (multiple item purchase discount):

S&H discount = the price of the 1ST remote’s S&H  + 1.99 each additional remote’s  S&H 

Shipped From: Pennsylvania, USA

Shipping Method: USPS mail service

USA Shipment Options:

   ◊ USPS 1ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS EXPRESS class mail service

Canadian Shipment Options:

   ◊ USPS 1ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Worldwide (Outside of  USA & Canada) Shipment Options:

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

 

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

5.     All cut keys are subject to a $20 deduction from the refund

 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

 

  Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


WORD KEY: