Brand New

"Dual Battery Maintenance Charger"

The 5-Stage Maintenance Charger & Desulfator that Works On All  12-V  Batteries

 

 

Kick Start Your Batteries

Featuring unique 5-stage charging, Xtreme charge from PulseTech Products Corporation is designed to dramatically increase the duty and life cycle of any size or type of 12-V lead-acid, sealed maintenance-free and absorbed glass mat (AGM) batteries.  It's particularly effective on deep cycle, high CCA rated batteris, starting batteries.  Utilizing PulseTech's patented pulse technology that not only keeps batteries in "like new" condition,but actually improves their charge capacity over time by desulfating the lead plates thus dramatically extending life cycles up to five times or more! Since 1994, PulseTech has been helping individuals, companies, fleets and military forces all over the world.

 

  

 

The PulseTech® Products Corporation  Xtreme Charge™ smart charger is a "next generation" 5-Stage Maintenance Charger that is  complete automatic and utilizes a proprietary charging/testing  algorithm, that not only optimizes the battery performance, but clearly displays the condition of the battery at all times by utilizing a series of 12 LED indicators.  Simply plug the charger in to a typical ac power source, connect  the clips (or lugs) to the battery, and walk away (for an hour or a year!).  It then determines the profile and size of the connected battery and performs a 60 second test to determine its current state of health/charge.  If the charger determines that the battery is bad and cannot be re-charged the BAD BATTERY light will  illuminate to let you know that the battery is either damaged or so deeply sulfated that it cannot accept an acceptable charge.  Assuming the connected battery is in reasonable  condition, the Xtreme Charger will display the current state of charge, 25%, 50%, 75% or 100% and begin to apply the appropriate charge rate and begin its unique pulsing.

Since the XC100-W charger is designed for both  maintenance and bulk charging, it automatically applies the minimum amount of charge amperage (0.0-2.5 A) necessary to restore the battery to optimal condition.  Once the battery is fully charged, the actual charge function turns off and the charger only applies the desulfation PULSE.  When the battery eventually drops below the threshold voltage, the absolute minimum  amount of charge is applied (often only 100-200mA) thus insuring the battery is never stressed over over-charged. necessary to restore and maintain the.  Designed to be maintenance charger, its intelligent algorithm allows it to charge ANY size 12-V lead-acid battery from the smallest up to as much 1250 CCAs.  It's the only charger of its kind able to do this!. 

Winner of over 100 awards, The Xtreme Charge utilizes the same technology that's incorporated into every US Army and USMC shop chargers that are used all over the world to charge, maintain and recover both filled lead acid and AGM batteries.   

Again, the Xtreme Charger features both a high performance "bulk charge" to quickly and  safely bring any 12V battery to a fully charged condition and then automatically switches to a variable float charge. PulseTech's intelligent, microprocessor driven circuitry imposes only the correct amount of charge rate as determined by the continual evaluation of the battery's condition. The charge rate may be as minimal as 0.1 A (100mA) during typical float up to it's full 2.5 A for more deeply discharged batteries.  WITH NEVER A POSSIBILITY OF OVER-CHARGING. No other  maintenance charger can accomplish this.

PulseTech's unique and patented PULSE technology increases the duty and life cycles of any size or type of 12-V lead-acid battery by minimizing the size of the lead sulfate crystals allowing for more active battery plate surface area to be used. This allows the battery to accept as much charge as possible without over-heating or over-charging. The patented PULSE technology ensure that your new batteries will stay in like-new condition while older batteries often improve dramatically. Duty cycles are typically extended from three to five times or considerably more depending  on the original condition of the battery and works for all types of lead-acid batteries! The Xtreme Charger is ideally suited for AGM and maintenance-free batteries (from less than 10 Ah to over 150 Ah), but works equally well on standard wet cell, VRLA and  gel cell.

Includes fuse-protected quick-disconnect battery clamp lead set and heavy duty lug connectors for a more semi-permanent application, Important Safety Instructions and Quick-Start Guide. Fuse-protected, spark-proof unit is UL and CE certified. Five-year warranty.

 

 

 

"The Charging Process"

The Charging process starts once you have connected the battery cables properly and plugged the Xtreme Charge into a  110-220 ac power source.

Green "On" light illuminates, indicating your charger is receiving proper ac input. If it's connected to the battery correctly, the red "Test" LED comes on, indicating the unit is testing your batteries condition

Once Xtreme Charge has evaluated your battery's current condition, the "Test" light goes off and the appropriate charge profile begins automatically.

The green "Charging" light indicates the charger is providing bulk charge to the battery.

Three green "Pulsing" LED's light sequentially as the  charger conditions the battery simultaneously. Patented PulseTech Technology enables it to accept and maintain its maximum charge.

During the "Test" cycle, Xtreme charge determines the battery state of charge and illuminates the appropriate light: "25%, 50%, 75% or 100% 

 

Check out my other items!

My Stores Logo

 

Specifications

Input Voltage : 90-250V AC

Max Charge Current : 2.5 A

Pulse Frequency : 22-28 kHz

Main Battery Cable Length : 6'

Lug / Clamp Cable Length : 2'

 

 


On Dec-03-12 at 10:25:09 PST, seller added the following information: