Stock # 116A

jl

This item is pre-owned – it will work like new once programmed to your

Remote has faded buttons and chips in the casing

One (1)

O.E.M. Original Equipment Manufacturer Factory

remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed


Item #: Pre-owned
116A-C
FCC ID: KOBUT1BT, KOBUTIBT
Part #: GM 15732803, GM15732803
Canada/Mexico Part #: 1983 101 393, 1983101393

  

 BEFORE YOU BUY PLEASE READ …

 This is a Pre-Owned Factory Original Equipment

O.E.M. keyless remote control transmitter.

  PLEASE BE CERTAIN THIS IS THE CORRECT PART # FOR YOUR CAR.

  

 There are several possible part #'s that may work on your truck.

This is dependent on the RKE system installed in your truck.

 

             2001 owners please read…             

Please match the #’s  above to your old or current remote.

 

If you do NOT have a remote:

- call your local GM dealer's Parts Dept.

w/ your VIN # to find out if this is the remote you need.

 

2001 models were equipped with 2 different remotes possibilities

they are NOT interchangeable

 … the other  part  # is GM/UTA 15042968


Remote / Battery Specifications

Condition: Pre-owned
Battery: Yes, Installed
Buttons: 3: Lock, Unlock, Panic
Required Batteries: 1: CR2032
Frequency: 315MHz (315 MHz)

 

Compatible Vehicles*:

 

1998 1999 2000 2001 2002 2003 2004 Chevy S10

1999 2000 2001 Chevy Silverado

2000 2001 Chevy Suburban

2000 2001 Chevy Tahoe

2000 2001 GMC Yukon

1999 2000 2001 GMC Sierra

1998 1999 2000 2001 2002 2003 2004 GMC Sonoma

1999 2000 Isuzu Hombre

*All vehicles with factory installed Remote Keyless Entry (RKE). 

  


MAKE/MODEL

YEARS

Chevy Silverado 1500 2500 3500

PROGRAMMING CHEVROLET: SILVERADO

   Use this procedure for New Body Style.

1.  Close all vehicle doors.

2. Insert key into ignition.  

3. Hold down power UNLOCK button on driver’s door panel-continue to hold down until instructed to release in step 9.   

4. Perform steps 5 - 8 in fairly rapid succession.   

5. Turn ignition to ON position (as far as you can go w/o starting engine).

6.  Turn ignition switch to OFF position.

7. Turn ignition switch to ON position.

8. Turn ignition switch to OFF position.  

9.Release power unlock button on door panel. vehicle will lock and unlock doors automatically.    

10.Hold down LOCK and UNLOCK buttons on remote simultaneously until  door locks & unlocks.  This step may take up to 30 secs.    

11.  Repeat step 10 NOW for each additional remote (including any existing remotes).    

12.Turn ignition switch to ON position in order to exit remote programming mode.  

                  use this procedure for Classic Body Style.

1.   Locate Data Link Port. It is located under dash drivers side. Be certain to know which pins are 8 &  4.
            (Notice port is wider on top row) 

 

   

 

2.  Make certain there are metal contact pins in terminals 8 & 4. Connect 8 to 4 w/ a  jumper wire (leave jumper wire connected throughout program procedure). Make certain to know which terminals are 8 & 4. vehicle will respond by locking & unlocking  doors to signify entering of program mode.    

3. Press & hold both LOCK & UNLOCK buttons together on 1st remote to be programmed. After about 15 secs, vehicle will respond by locking & unlocking doors. Release buttons on remote.  

4.Within 1minute, repeat previous step on remaining remotes to be programmed.    

 5.Remove jumper wire applied to the OBDII Port.

1999 2000 2001

99 00 01

All Models With Keyless Entry

Chevy Tahoe Truck

PROGRAMMING

1.      Close all vehicle doors.

2.      Insert the key into the ignition.

3.      Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed
to release in step 9.

4.      Perform steps 5 through 8 in fairly rapid succession.

5.      Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6.      Turn the ignition switch to the OFF position.

7.      Turn the ignition switch to the ON position.

8.      Turn the ignition switch to the OFF position.

9.      Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.

10.  Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks.
This step may take up to 30 seconds.

11.  Repeat step 10 NOW for each additional transmitter (including any existing transmitters).

12.  Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

 

2000 2001

00 01

All Models With Keyless Entry

Chevrolet Suburban

 Programming instructions

1.      Close all vehicle doors.

2.      Insert the key into the ignition.

3.      Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.

4.      Perform steps 5 through 8 in fairly rapid succession.

5.      Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6.      Turn the ignition switch to the OFF position.

7.      Turn the ignition switch to the ON position.

8.      Turn the ignition switch to the OFF position.

9.      Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.

10.  Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11.  Repeat step 10 NOW for each additional transmitter (including any existing transmitters).

12.  Turn the ignition switch to the ON position in order to exit the transmitter programming mode

 

2000 2001

00 01

All Models With Keyless Entry

Chevy S10   S 10   S-10 Pickup P/U

1.   Close all vehicle doors.

2. Insert the key into ignition.    

3.  Hold down power UNLOCK button on driver’s door panel-continue to hold down until instructed to release in step 9.   

4.Perform steps 5 through 8 in fairly rapid succession.   

5. Turn ignition switch to ON position (as far as you can go without starting engine).

6. Turn ignition switch to OFF position.

7  Turn ignition switch to ON position.

8  Turn ignition switch to OFF position.  

9. Release power unlock button on door panel. The vehicle will lock and unlock doors automatically.    

10. Hold down LOCK & UNLOCK buttons on the remote at the same time until door locks & unlocks.  This step may take up to 30 secs.    

11.  Repeat step 10 NOW for each additional transmitter (including any existing remotes).    

12.  Turn ignition switch to the ON position in order to exit remote program mode.  

               

1998 1999 2000 2001 2002 2003 2004

98 99 00 01 02 03 04

All Models With Keyless Entry

GMC Sonoma

PROGRAMMING

1.      Close all vehicle doors.

2.      Insert the key into the ignition.

3.      Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release.

4.      Perform steps 5 through 8 in fairly rapid succession.

5.      Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6.      Turn the ignition switch to the OFF position.

7.      Turn the ignition switch to the ON position.

8.      Turn the ignition switch to the OFF position.

9.      Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.

10.  Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11.  Repeat step 10 NOW for each additional transmitter (including any existing transmitters).

12.  Turn the ignition switch to the ON position in order to exit the transmitter programming mode

 

1998 1999 2000 2001 2002 2003 2004

98 99 00 01 02 03 04

All Models With Keyless Entry


STOP!

 Before You Buy Please Read…

Program Remote To Your Vehicle

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:

1.   Some years require diagnostic programming according to how the manufacturer set the system

        a.   Free programming Requirements per manufacturer upon request

        b.  Contact  us via  eBay messages (Keyless4u store) Prior to Purchase  

with  your vehicle’s ….

1.  Make

2.  Model

3.  Year

2.  We will respond via eBay messages with the manufacturer’s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool – we do not write the programming – we pass it on to you as a courtesy.

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

Your vehicle will be installed with one of the following keyless entry systems:  

 a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

 c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

 

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

 

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

 

100% Guarantee Remote Shipping / Return Policy

Shipping & Handling

Combined Shipping & Handling Discount (multiple item purchase discount):

S&H discount = the price of the 1ST remote’s S&H  + 1.99 each additional remote’s  S&H 

Shipped From: Pennsylvania, USA

Shipping Method: USPS mail service

USA Shipment Options:

   ◊ USPS 1ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS EXPRESS class mail service

Canadian Shipment Options:

   ◊ USPS 1ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Worldwide (Outside of  USA & Canada) Shipment Options:

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

 

Warranty/Returns:  

  1. We have a 30 day return policy. 
  2. All returns for replacements and refund need an RMA #.
  3. Please contact us before returning items so we can give you the RMA # and the proper return address.
  4. No refunds / replacements will be granted without an RMA#

 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

 

  Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


WORD KEY: