Stock # 116A
Jl
This item is pre-owned – it will work like new
once programmed to your vehicle
One
(1)
O.E.M.
Original Equipment Manufacturer Factory
remote
keyless entry fob alarm
Transmitter
control clicker keyfob controller replacement
Functions at 100% Tested & Guaranteed
BEFORE YOU BUY PLEASE READ …
This is a Pre-Owned Factory Original Equipment
O.E.M. keyless remote control transmitter.
|
PLEASE BE CERTAIN THIS IS THE CORRECT PART # FOR YOUR CAR.
There are several possible part #'s that may work on your truck.
This is dependent on the RKE system installed in your truck.
2001 owners please read…
Please match the #’s above to your old or current remote.
If you do NOT have a remote:
- call your local GM dealer's Parts Dept.
w/ your VIN # to find out if this is the remote you need.
2001 models were equipped with 2 different remotes possibilities
they are NOT interchangeable
… the other part # is GM/UTA 15042968
|
|
Remote / Battery Specifications | Condition: Pre-owned
|
|
| Battery: Yes, Installed |
|
| Buttons: 3: Lock, Unlock, Panic |
|
| Required Batteries: 1: CR2032 |
|
| Frequency: 315MHz (315 MHz) |
|
|
Compatible Vehicles*:
1998 1999 2000 2001 2002 2003 2004 Chevy S10
1999 2000 2001 Chevy Silverado
2000 2001 Chevy Suburban
2000 2001 Chevy Tahoe
2000 2001 GMC Yukon
1999 2000 2001 GMC Sierra
1998 1999 2000 2001 2002 2003 2004 GMC Sonoma
1999 2000 Isuzu Hombre
|
|
|
*All vehicles with factory installed Remote Keyless Entry (RKE). |
|
|
MAKE/MODEL |
YEARS |
|
Chevy Silverado 1500 2500 3500
PROGRAMMING CHEVROLET: SILVERADO
Use this procedure for New Body Style.
|
1. Close all vehicle doors.
2. Insert key into ignition.
3. Hold down power UNLOCK button on driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 - 8 in fairly rapid succession.
5. Turn ignition to ON position (as far as you can go w/o starting engine).
6. Turn ignition switch to OFF position.
7. Turn ignition switch to ON position.
8. Turn ignition switch to OFF position.
9.Release power unlock button on door panel. vehicle will lock and unlock doors automatically.
10.Hold down LOCK and UNLOCK buttons on remote simultaneously until door locks & unlocks. This step may take up to 30 secs.
11. Repeat step 10 NOW for each additional remote (including any existing remotes).
12.Turn ignition switch to ON position in order to exit remote programming mode. |
use this procedure for Classic Body Style.
1. Locate Data Link Port. It is located under dash drivers side. Be certain to know which pins are 8 & 4.
(Notice port is wider on top row)
2. Make certain there are metal contact pins in terminals 8 & 4. Connect 8 to 4 w/ a jumper wire (leave jumper wire connected throughout program procedure). Make certain to know which terminals are 8 & 4. vehicle will respond by locking & unlocking doors to signify entering of program mode.
3. Press & hold both LOCK & UNLOCK buttons together on 1st remote to be programmed. After about 15 secs, vehicle will respond by locking & unlocking doors. Release buttons on remote.
4.Within 1minute, repeat previous step on remaining remotes to be programmed.
5.Remove jumper wire applied to the OBDII Port. |
1999 2000 2001
99 00 01
All Models With Keyless Entry |
|
Chevy Tahoe Truck
PROGRAMMING
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed
to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
|
2000 2001
00 01
All Models With Keyless Entry |
|
Chevrolet Suburban
Programming instructions
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode
|
2000 2001
00 01
All Models With Keyless Entry |
|
Chevy S10 S 10 S-10 Pickup P/U
|
1. Close all vehicle doors.
2. Insert the key into ignition.
3. Hold down power UNLOCK button on driver’s door panel-continue to hold down until instructed to release in step 9.
4.Perform steps 5 through 8 in fairly rapid succession.
5. Turn ignition switch to ON position (as far as you can go without starting engine).
6. Turn ignition switch to OFF position.
7 Turn ignition switch to ON position.
8 Turn ignition switch to OFF position.
9. Release power unlock button on door panel. The vehicle will lock and unlock doors automatically.
10. Hold down LOCK & UNLOCK buttons on the remote at the same time until door locks & unlocks. This step may take up to 30 secs.
11. Repeat step 10 NOW for each additional transmitter (including any existing remotes).
12. Turn ignition switch to the ON position in order to exit remote program mode. |
|
1998 1999 2000 2001 2002 2003 2004
98 99 00 01 02 03 04
All Models With Keyless Entry |
|
GMC Sonoma
PROGRAMMING
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode
|
1998 1999 2000 2001 2002 2003 2004
98 99 00 01 02 03 04
All Models With Keyless Entry |
STOP!
Before You Buy Please
Read…
Program Remote To Your Vehicle
If
you're not sure your vehicle can use this remote, please ask questions or
contact your local dealer first.
This remote needs to be programmed to your vehicle in order for it
to work with your vehicle’s installed RKE (remote keyless entry ) system:
1.
Some years require diagnostic programming according to how the manufacturer set
the system
a.
Free programming Requirements per manufacturer upon request
b. Contact us via eBay
messages (Keyless4u store) Prior to Purchase
with
your vehicle’s ….
1. Make
2. Model
3. Year
2. We will respond via eBay messages with the manufacturer’s
programming requirements so that you can determine if you are capable of
programming your vehicle or if you will need to visit a local dealer or
locksmith for programming with a diagnostic scan tool – we do not write
the programming – we pass it on to you as a courtesy.
How to find out if this remote is compatible with your
Vehicles’ installed RKE System
If you're not sure your vehicle can use
this remote, please ask questions or contact your local dealer first.
1. Check the back of your current or old keyless
remote to match FCC ID /Part #’s.
2. Contact your local dealer and tell them your VIN#
and ask what part # / FCC ID you need.
Your vehicle will be installed
with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed
at time of manufacture.
b.
Optional Keyless Remote Packages: Installed by a dealer.
c.
Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio
shop.
d. No remote keyless entry system at all.
The above information can
change which remote you need
for your installed remote keyless system.
Australian Customers: The frequency of our remotes typically do not match the frequency
needed for Australian Model Remotes. Please verify that this remote will work
for your vehicle prior to purchase.
Payment: We accept payment
via PayPal or Credit Card. Please contact us via eBay messages for any
questions concerning payments. Payment is expected within 5 days
PA SALES TAX:
As per the State of PA Franchise Board we must collect sales tax from PA
Residents for any purchase made from our store.
Contact/Email:
Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY
MESSAGES. Messages & Best Offers are checked throughout the day & we
typically respond 7 days a week. Please contact us with questions via eBay
messages (keyless4u).
100% Guarantee Remote Shipping
/ Return Policy
Shipping
& Handling
Combined Shipping & Handling Discount (multiple item purchase
discount):
S&H
discount = the price of the 1ST remote’s S&H
+ 1.99 each additional remote’s S&H
Shipped From: Pennsylvania, USA
Shipping Method: USPS mail service
USA Shipment Options:
◊ USPS 1ST class mail service
◊ USPS Priority class mail service
◊ USPS EXPRESS class mail service
Canadian Shipment Options:
◊ USPS 1ST class mail service
◊ USPS Priority class mail service
◊ USPS Express class mail service
Worldwide (Outside of USA & Canada)
Shipment Options:
◊ USPS Priority class mail service
◊ USPS Express class mail service
Australian Customers: The frequency of our remotes typically do not match the frequency
needed for Australian Model Remotes. Please verify that this remote will work
for your vehicle prior to purchase.
Warranty/Returns:
- We have a 30 day return
policy.
- All returns for replacements
and refund need an RMA #.
- Please contact us before
returning items so we can give you the RMA # and the proper return
address.
- No refunds / replacements will
be granted without an RMA#
We
ensure proper working condition of all previously used or new remotes through a
serious of tests performed with the Santronics Testing device. Each button is
tested for functionality prior to shipment and then logged.
Please Note:
Each remote and circuit board is UV id’d prior to shipment – All returns
receive a UV ID inspection to verify originality of remote sent prior to refund
or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on
Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply
working.
Some are new and some are used.
WORD KEY:
- Keyless Remote Entry = Vehicle
Lock / Unlock Remote Control
- RKE = Remote Keyless Entry
- Keyfob or Key Fob = Keyless
Remote Transmitter Control
- Clicker = Keyless Remote Entry
Control
- VIN # = Vehicle Identification
#: 17 characters
- OEM = Original Equipment
Manufacturer