CALL US WITH QUESTIONS ABOUT FIT, OR TO PAY WITH A CREDIT CARD 1-866-587-1930

Quiet Your Ride

POLARIS RANGER 6X6 SIX WHEELER 500 700 EFI AND 800 (1999-2013)

weld on adapter

The Silent Rider® system is custom fit to a wide variety of ATV stock exhausts. ADAPTER INCLUDED IF NEEDED.

The Silent Rider®(formerly known as “The Benz Silent Rider”) is the industry leader in ATV exhaust silencers. You can expect up to a 60% reduction in the exhaust noise of your ATV, with no loss in power and performance. The Silent Rider’s® patented technology is custom designed to each ATV make and model, offering the quality and reliability expected by hunters, recreational riders, game wardens, military and law enforcement. We have THOUSANDS of satisfied customers, simply because it works!

The ONLY Silencer Made in America

he Silent Rider® is proudly manufactured in the U.S.A. of 14 gauge aluminized steel. We have been testing and using our silencer for almost 10 years with great success. Our ATV exhaust is quick and easy to install and remove. The Silent Rider® is custom fit to each specific make and model. You will ride in stealth in minutes! NOTE: IF YOU RIDE AT HIGH ALTITUDES, CHECK THE INSTRUCTIONS FOR SPECIAL VENTING INSTRUCTIONS.

Mounting for The Silent Rider®

All of our silencers will pressure/friction fit to either directly your stock muffler or to one of our adapters. Adapters are used at an attachment point for The Silent Rider®. Never is The Silent Rider®a permanent mount. Only an adapter (if needed for the specific ATV model) is permanent. Our unique design does not need clamping making installation and removal very easy. The Silent Rider® is designed to custom fit your ATV model with a heat shield, turndown pipe, and sturdy mounting brackets. There is no confusing assembly required!

The Silent Rider® ATV silencer has 3 mounting methods that depend on the ATV model application.

No Adapter Needed
When there is enough flange on the end of the stock muffler get a tight pressure fit, then no adapter is needed. Once the mounting brackets are fit to the rubber coated clamps and attached to the back rack or frame, the installation is complete. It should take only minutes to mount!

Weld-on Adapter
Many ATV models do not have a proper setup to pressure/friction fit The Silent Rider®; therefore a small adapter is necessary. It will be included with the silencer at no charge. According to the instructions included with each custom ATV silencer, it is recommended that a wire weld is used to attach our adapter to the stock muffler. This provides a perfect attachment point for the silencer to pressure fit to. The adapter stays attached to the factory muffler, allowing you to remove the silencer, if you like. The adapter will not interfere with the performance of the exhaust should you remove the silencer.

Optional Bolt-on Adapter
The optional bolt-on adapter is available for some ATV models that have 3-bolt pattern muffler tailpipes/spark arrestors. Just remove the bolts and the stock tailpipe and replace with the adapter and bolt provided. There is no drilling necessary! Once the adapter is in place, The Silent Rider®will pressure fit to the adapter. The support brackets on The Silent Rider® will mount onto the back rack or the frame with the rubber coated clamps provided for a solid mount. The weld-on adapter is always an option, but the bolt-on adapter makes mounting simple as it lines up perfectly with the existing bolt holes. The $22.95 is well worth it!

PLEASE ALLOW 5-12 BUSINESS DAYS FOR DELIVERY

ON SOME ITEMS WE MUST ORDER INTO OUR STORE IN LOUISIANA BEFORE WE CAN SHIP TO YOU.

PLEASE TAKE THAT INTO ACCOUNT OF DETERMINING SHIPPING. MOST CASES 5-7 BUSINESS DAYS.

FREE U S SHIPPING ONLY

ALASKA, HAWAII, PUERTO RICO AND AFO/APO RESIDENTS PLEASE EMAIL FOR SHIPPING COSTS BEFORE PURCHASING AS IT WILL NOT BE FREE TO NON US 48 STATE RESIDENTS

WE SHIP UPS, FEDEX, AND USPS AT OUR DISCRETION

PLEASE NOTE: IN ORDER TO GIVE YOU THE LOWEST POSSIBLE PRICES, WE DO NOT STOCK SOME OF THE ITEMS WE SELL ON EBAY. WHEN PURCHASED WE ORDER FROM THE MANUFACTURER, AND THEN SHIP IT TO YOU.

IF THE ITEM YOU PURCHASE IS UNAVAILABLE WE WILL NOTIFY AND REFUND YOU WITHIN 48 BUSINESS HOURS

RETURNS

IF WE MAKE A MISTAKE WE WILL FIX IT AND PAY FOR ALL SHIPPING COSTS ASSOCIATED WITH THE RETURN

IF YOUR ITEM IS DEFECTIVE WE MAY HAVE TO INSPECT IT BEFORE WE CAN REFUND YOU OR SHIP YOUR NEW PRODUCT

WARRANTY MAY BE HANDLED THROUGH THE PRODUCTS MANUFACTURER

ALL RETURNS MUST BE IN ORIGINAL PACKAGING AND IN RE-SELLABLE CONDITION

ALL RETURN SHIPPING COSTS FOR SIZE EXCHANGES ARE THE RESPONSIBILITY OF THE BUYER

THERE IS A 10% RE-STOCKING FEE

IF DAMAGED IN SHIPPING, INSPECT IMMEDIATELY AND GIVE NOTICE TO THE CARRIER, THEN LET US KNOW SO WE CAN HELP FILE A CLAIM.

The Silent Rider® is proudly manufactured in the U.S.A. of 14 gauge aluminized steel. We have been testing and using our silencer for almost 10 years with great success. Our ATV exhaust is quick and easy to install and remove. The Silent Rider® is custom fit to each specific make and model. You will ride in stealth in minutes! NOTE: IF YOU RIDE AT HIGH ALTITUDES, CHECK THE INSTRUCTIONS FOR SPECIAL VENTING INSTRUCTIONS.