Template By Frooition Lite!

The picture is of the actual part you are bidding on. This is a used part. Please compare part numbers when possible before bidding. This Control module may require reprogramming to insure proper function, which can be done at your local dealership.

If you have any questions please send me a message and I will do my best to answer it.

Donor Vehicle
Model	SILVERADO 2500
Year	2004
Mileage	80010 Miles (0 = not available or unknown)
Stock Number	12CT89
Store Number	1

NOTE: Image(s) shown may be the vehicle from which
the part was pulled, or a generic image representing
typical stock, rather than the unique item being sold.

Part Detail	(see Help)
Part Grade	A
Part Category	U
Part Placement
Notes	W/T,GREY

This part will fit these makes and models with these options

CHEVROLET VAN 03-06 driver, 2500 series, 8500 GVW (opt C5F)
CHEVROLET VAN 03-06 driver, 2500 series, 8600 GVW (opt C6P)
CHEVROLET VAN 03-07 driver, 3500 series
CHEVROLET VAN 07 driver, 2500 series
SILVERADO 1500 PICKUP 03-04 driver, single port connector
SILVERADO 1500 PICKUP 05-06 driver, 1500HD
SILVERADO 1500 PICKUP 05-06 driver, exc. 1500HD; single port connector
SILVERADO 1500 PICKUP 07 classic style (creased Dr skin), driver, 1500HD
SILVERADO 1500 PICKUP 07 classic style (creased Dr skin), driver, exc. 1500HD; single port connector
SILVERADO 2500 PICKUP 03-04 driver, crew cab
SILVERADO 2500 PICKUP 03-04 driver, exc. crew cab; w/2500HD
SILVERADO 2500 PICKUP 05-06 driver
SILVERADO 2500 PICKUP 07 classic style (creased Dr skin), driver
SILVERADO 3500 PICKUP 03-06 driver
SILVERADO 3500 PICKUP 07 classic style (creased Dr skin), driver

Guarantee and Returns

Most parts we sell through eBay Motors come with a 90-day money back guarantee unless otherwise stated. The 90 day period starts when you take possession of the part. No labor warranty is provided.

In the event a part sold with a warranty fails to operate within the warranty period we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option. No refund on deposits or unwanted special order parts or special "cut" items.

Original shipping charges and return shipping charges are not refunded.

LIMITED PARTS WARRANTY

This warranty does not include coverage of sensors, gaskets, electrical components, wiring, brackets, belts, pumps, filters, hoses, seals or fuel related parts or emission related valves or manifolds.

This warranty is a parts exchange warranty. If we do not have the part in stock to replace the defective part Atkinson Auto Parts reserves the right to choose between: (a) repairing the defective part, (b) locating a replacement part, or (c) providing a refund or the original purchase price.

This warranty does not include coverage for the cost of any labor or any other expense incurred by the purchaser

These costs include, but are not limited to towing charges, loss of time, lost use of vehicle, inconvenience, lodging, oil, filters, anti-freeze, telephone charges, car or truck rental, gaskets, or seals.

CONDITIONS THAT VOID WARRANTY

Installation is not done by a certified mechanic.

Installation of part(s) in any non-stock application (off-road racing, conversion, fleet or commercial application, etc.

Dismantling of part(s) for any reason.

Improper installation or handling.

Warranty only applies to the purchaser shown on this invoice.

STANDARD LIMITED WARRANTY

Warrantor whose name and address appears above warrants all parts for warranty period on invoice from date of purchase. In event of defect, promptly notify warrantor.

Important: The obligations of the warrantor are limited to replacement only as provided herein. Implied warranties of merchantability or fitness for a particular use are limited to the same duration as the limited written warranty provided herein. Warrantor shall not be liable for any incidental or consequential damages included but not limited to installation, removal or use of this merchandise.

MECHANICAL PARTS - OTHER CONDITIONS

1. Flush Drain and replace fluids to systems manufacturers suggested fluids types and levels.

2. Install new seals, gaskets, filters, bolts, plugs, sensors, boxes, thermostats, belts, hoses, lines, cables, coolers, wires, emission valves or any other type of required part not covered under warranty and/or OEM specifications

3. Properly align / tighten all parts to manufactures suggested specifications.

4. Flush cooling system and refill to appropriate level.

Note: when interchanging between years and models it may be necessary to change wiring, linkage, speedometer gears or sensors. If manufacturer's procedures are not done, the warranty will be void. Please call us if you have any questions.

ENGINE WARRANTY

1. All engines are stamped and have a heat tab installed which has a center that will melt if the temperature exceeds 255 to 260 Fahrenheit. If this heat tab is melted the warranty is void. If your original part failed because overheating, we strongly recommend that you remedy what caused it to fail, so that future parts will not be ruined. Also it is required that these items are followed to manufacturer requirements and specifications to protect the warranty of the purchased parts.

2. Used engines are guaranteed not to have cracked block, head or bad crankshaft. Parts external to the cylinder block and the cylinder head(s) (i.e., carburetor distributor, fuel pump, etc.) are not warranted. These are left on the engine for the installer's convenience ONLY.

3. All conditions listed under terms of sale (above) apply.

4. Used engines guaranteed against rod knock, excessive smoking, and excessive oil consumption.

5. It is recommended the buyer replace the rear main seal and inspect gaskets prior to installation.

6. All Parts on the engine at time of sale must be returned with the core engine for core credit.

TRANSMISSION WARRANTY

1. Transmissions must be installed to current OEM specifications for a new transmission install. Transmissions must be installed by a certified mechanic. Failure to flush and flow test the system on your vehicle will void your warranty.

2. Improper detent adjustment, low fluid level, on Automatic Transmissions - Failure to install new filter(s), broken front pump, or improper installation voids all warranties.

3. All conditions listed under terms of sale (above) apply.

4. It is recommended buyer replace front seal prior to installation.

In the event a part sold with a warranty fails to operate within the warranty period we will replace the part(s) with a functionally equivalent part or refund the part purchase price, at our option.

Shipping

Atkinson Auto Parts ships to US addresses within the 48 states only via UPS ground OR USPS.

No Alaska, Hawaii, Puerto Rico, APO, FPO please

No International shipping available.

Pick up at our facilities is available. Please email us prior to your purchase to arrange pick up.

Items will be shipped within 1-2 days of purchase.

Please allow 5-10 days for delivery. Most areas in the US are within 5 days. No expedited shipping is available.

If an item arrives damaged, please call or send us a message through paypal within 24 hrs for instructions.

Availability

If you cannot find a part that you need in the store, please contact us and we will let you know if we can get it and the price. Due to high demand, short supply or human error, occasionally we may be out of stock on an item. If this happens, we will contact you immediately and offer you the option of waiting for the part to come in stock, or a full refund.

Payment Policies

We accept immediate payment using a credit card via PayPal only.

Sales tax will be applied to all orders shipped to the state of Texas.

Help

Core Charge. Core is an acronym for ‘Cash On Return’. A core charge is sometimes applied to rebuildable parts such as engines or alternators that can be redeemed for a portion of their original price. If the part you are purchasing has a core charge applied, it will be noted in the description.

Parts Grading. A standard code system is used to communicate the condition and quality of a part between automotive recyclers, automotive repair shops, and insurers. Knowing how these codes are used will help you understand whether the part meets your expectations before you buy it and what you can expect from the part when you receive it.

A Grade	- The highest quality part. It is of low miles and/or exceptional condition for its age.
B Grade	- The second level quality part. It is of average miles and normal condition for its age.
C Grade	- The third level quality part. It has high miles and/or light damage.
No Grade	- A part that has not yet been graded.

To learn more about Parts Grading click here.