Stock #:225 (JAAB56)

Initials: jl

This item is pre-owned – it will work like new once programmed to your vehicle

 Remote has chips in the casing and a crack in the casing

One (1)

O.E.M. Original Equipment Manufacturer Factory

 remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

WORKING BATTERY INSTALLED

 
BEFORE YOU BUY PLEASE READ.…   

Remote / Battery Specifications
LED Light:  Red
Condition:  Pre-Owned
Battery:  Yes, Installed
Buttons:  4: Lock, Unlock, Panic, Trunk
Required batteries:  1: CR2025
Frequency:  315MHz (315 MHz)
Compatible Vehicles*: 1999 2000 2001 99 00 01 ACURA TL +S                                     1998 (**for EX Models ONLY), 1999, 2000, 2001, 2002                                     Honda Accord                                    ** If you have a DX or LX 1999 Honda Accord you will need FCC ID: A269ZUA101
Transmitter Identification Transmitters for the 1998–99 Accord and the 2000–02 Accord look exactly alike, however; they are not interchangeable. 1998–99 transmitter works the doors of a 2000–03 Accord, but it does not open the trunk.   If you are not sure which transmitter you have: - Press & hold the trunk release button while looking at -The 1998–99 transmitter LED lights up in approx.1.1 seconds.   Programming the Transmitter NOTES: • The system accepts up to three transmitters. The transmitter codes are stored in a stacking-type memory. If a fourth transmitter code is programmed, the code for the first transmitter is erased. • Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all of the transmitters once you are in the programming mode. • You must complete steps 1–6 within 4 seconds of the previous step to keep the system from exiting the programming mode. 1. Turn the ignition switch to ON (II). 2. Press the “Lock” or “Unlock” button on one of the transmitters. (An unprogrammed transmitter can be used for this step.) 3. Turn the ignition switch to LOCK (0). 4. Repeat steps 1, 2, and 3 two more times using the same transmitter used in step 2. 5. Turn the ignition switch to ON (II). 6. Press the “Lock” or “Unlock” button on the same transmitter. Make sure the power door locks cycle to confirm that the system is in programming mode. 7. Within 10 seconds, press the “Lock” or “Unlock” button on each transmitter. Make sure the power door locks cycle after you press each transmitter button to confirm that the system accepted the transmitter’s code. 8. Turn the ignition switch to LOCK (0) to exit the programming mode.

All of our keyless remotes are listed just as the manufacturer states for make model & year compatibility  -

 SOME VEHICLES HAVE KEYLESS SYSTEMS INSTALLED THAT HAVE STANDARD PACKAGES &

SOME ARE OPTIONAL (DEALER INSTALLED)

**(this can change what remote FCC ID &/or part will be compatible with your system)

** WE ASK THAT YOU VERIFY w/ A DEALER PRIOR TO PURCHASE AS TO WHAT FCC ID # YOU NEED FOR YOUR VIN

STOP!

 Before You Buy Please Read…

Program Remote To Your Vehicle

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:

1.   Some years require diagnostic programming according to how the manufacturer set the system

         a.   Free programming Requirements per manufacturer upon request

         b.  Contact  us via  eBay messages (Keyless4u store) Prior to Purchase  

with  your vehicle’s ….

1.  Make

2.  Model

3.  Year

2.  We will respond via eBay messages with the manufacturer’s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool – we do not write the programming – we pass it on to you as a courtesy.

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Shipping & Handling

Combined Shipping & Handling Discount (multiple item purchase discount):

S&H discount = the price of the 1^ST remote’s S&H  + 1.99 each additional remote’s  S&H 

Shipped From: Pennsylvania, USA

Shipping Method: USPS mail service

USA Shipment Options:

   ◊ USPS 1^ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS EXPRESS class mail service

Canadian Shipment Options:

   ◊ USPS 1^ST class mail service

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Worldwide (Outside of  USA & Canada) Shipment Options:

   ◊ USPS Priority class mail service

   ◊ USPS Express class mail service

Australian Customers: The frequency of our remotes typically do not match the frequency needed for Australian Model Remotes. Please verify that this remote will work for your vehicle prior to purchase.

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

  Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

WORD KEY:

• Keyless Remote Entry = Vehicle Lock / Unlock Remote Control
• RKE = Remote Keyless Entry
• Keyfob or Key Fob = Keyless Remote Transmitter Control
• Clicker = Keyless Remote Entry Control
• VIN # = Vehicle Identification #: 17 characters
• OEM = Original Equipment Manufacturer