T25/T28 21PC TURBO KIT TURBOCHARGER+MANIFOLD+INTERCOOLER 85-89 MR2/-91 AE86 4AGE

ITEM SKU: TBK-SDD-T25+TM-4AGE-C-T25-21
TBC-T25 TM-4AGE-C-T25 ITCL-2004 FMICPP-U-25-ST BOV-GS-BL FP-G250 BC-RD TT-BOX-BK FPR-H-SL VS-RD OC-16R-SL OFRL+L ODL OCT-SL AF-H-3-BL WRAP-BK-15M GA3PD-BK+GA-BOOST+OT+WATER-27 ADT-WATEMP-38MM

High Compression/ Boosting T25/ T28 Turbocharger

The objective of a turbocharger is to improve the engine's volumetric efficiency by solving one of its cardinal limitations. A naturally aspirated automobile engine uses only the downward stroke of a piston to create an area of low pressure in order to draw air into the cylinder through the intake valves. The pressure in the atmosphere is no more than 1 atm (approximately 14.7 psi), so there ultimately will be a limit to the pressure difference across the intake valves and thus the amount of airflow entering the combustion chamber. Since the turbocharger increases the pressure at the point where air is entering the cylinder, a greater mass of air (oxygen) will be forced in as the inlet manifold pressure increases. The additional air flow makes it possible to maintain the combustion chamber pressure and fuel/air load even at high engine revolution speeds, increasing the power and torque output of the engine.

Specifics and Benefits:

Capable of Boosting Horse Power up to 280 BHP

High Quality Material, Cast Housing with Durable Steel

Capable of 5-28 PSI Output at Peak Power Performance

Internal Wastegate Setting: 8 PSI

Exhaust (Turbo Manifold) Flange:	Standard T25/ T28
Exhaust (Downpipe) Flange:	Standard 5-Bolt
Intake Inlet/ Outlet:	2.00"/ 1.50"

Compressor:

Trim:	40
A/R:	.42
Inducer:	37.80
Exducer:	59.70

Turbine:

Trim:	73
A/R:	.86
Inducer:	52.90
Exducer:	45.47

High Performance Cast Iron Exhaust Tubro Manifold

The heart of any turbo system is the manifold and the turbocharger. These form the basis where the rest of the turbo system is built around. There is no match for durability and strength for cast turbo manifolds. Cast manifolds are more durable over long periods of constant heat cycles like daily driving. Cast turbo manifolds offer short runners resulting in quicker spooling for whatever turbocharger is being used. The shorter runners of the cast manifolds take up little space so that it is possible to keep accessory components, such as air conditioning and power steering, of your engine intact.

Specifics and Benefits:

High Performance JDM Turbo Racing Design

Made of High Quality Cast Iron Material for Strength and Durability

Computerized Mandrel-Bended to Maximize Air Flow Smoothness

TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing

Increase Engine Exhaust Output and Efficiency

Standard T25/ T28 Configuration Outlet

Universal Lightweight Aluminum Bar and Plate Front-Mount Intercooler

When the charged air enters the end tank, it travels through the tubes of an Intercooler, in which the heat is transferred via fins, where cooler ambient air passes over the tubes. This mechanism further removes heat from air before exiting the opposite end tank and routing to the engine.

Bar and Plate Intercooler functions identically to the Tube and Fin Core, with the exception that, charged air travels through its rectangular shaped passages, which have more surface area; thus, improves cooling effect and power of the charged air. The advantage of this type of intercoolers is that, since the bar and plate core affords up to 35% larger surface area for cooling, a physically smaller intercooler can be used and still retains the cooling efficiency of a larger tube and fin design. This is important for a builder who has a vehicle with a compact opening in the front of it or when there are immovable obstructions present.

Specifics and Benefits:

High Performance Bar and Plate Turbo Racing Design

Made of High Quality T-6061 Aluminum Durable Material

Helps Reducing Engine Inlet Temperature

Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level

Intercooler Size: (24.50" Including Piping) 22.25" (L) X 10.75" (H) X 2.50"(W)

Core Size: 17.75" (L) X 10.50" (H) X 2.50"(W)

Inlet/ Outlet : 2.00"/ 2.00”

Inlet/ Outlet Inner Diameter: 1.75"/ 1.75”

Universal Aluminum Intercooler Piping

Specifics and Benefits:

Made of High Quality T-6061 Lightweight Aluminum Piping

2.50" Piping Diameter

Increase 65% Air Flow Comparing with other Standard Piping

Type-S Adjustable Aluminum Billet Blow Off Valve BOV

Specifics and Benefits:

Billet Aluminum Body

8 Discharge Ports That Draw In Surrounding Air and Release a Unique Discharge Sound

40mm, Hard-Anodized Valve for Increased Airflow

Dual Spring System Promoted Response and Allows for High Boost Pressures

Holds Up to 30 PSI Boost Pressure

Aggressive JDM Racing Discharge Sound

Aluminum 2.5” Flange Pipe

Specifics and Benefits:

Made of High Quality T-6061 Aluminum, Lightweight, Heat-Persistent Design

2.5" Pipe Size

30 PSI Turbo Boost Controller

Specifics and Benefits:

CNC Machined Aluminum Body

1-30 PSI Adjustable

Universal Box Style Programmable LED Turbo Timer

Specifics and Benefits:

Allows the Vehicle to Idle the Engine, for the Timed Period, with the Ignition Key Removed

Auto Mode - Precise Calculation of Cool Down Period to Ensure Proper Cool Down of Turbo-Charged Engine.

Digital Display - Allowing Clear Vision during Day & Night Time.

Universal Adjustable Fuel Pressure Regulator

Specifics and Benefits:

Adjustable from (1-15) psi to 140 Maximum Fuel Pump Capacity

Improves Fuel Delivery Efficiency and Prevents Fuel Starvation for More Consistent Boost and Fuel Flow

Designed to Maintain the Optimal Fuel Rail Pressure for High Performance/ Turbocharged Engine

Delivers Vehicles’ Highest Performance, with Long Life and Highly Reliable Operation

Comes with Hose, Bolts, Connectors and Installation Kits

Universal Voltage Stabilizer/ Regulator

Specifics and Benefits:

Improves Ignition Flow and Strengthens Starting Power

Stabilizes Voltage, Improves Engine Performance

Specially Designed with High Water and Heat Resistance

Universal 16-Row 10 AN Oil Cooler

Specifics and Benefits:

Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials

Made with High Quality T-6061 Aluminum

Potentially Reduces Oil Temperature up to 50°F

Overall Size: 13.00" x 6.00" x 2.00"

Core Size: 9.25" x 5.00" x 2.00"

Inlet / Outlet Size: 10 AN

Oil Filter Relocation and Oil Line Kits

Specifics and Benefits:

Made of High Quality Lightweight Aluminum with CNC Laser Cut

Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines

Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters

10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern

Billet Aluminum Oil Catch Tank

Specifics and Benefits:

Clear Tube Indicator for Easy Visual of Checking if the Tank is Full

Ensure Better Mileage, Better Performance and Preserve Engine Life

Catch Oil and Sludge to Save the Life of the Engine

Universal 3-Port Gauge/ Meter Dash Pod

Specifics and Benefits:

Dimensions: 9.25” (Length) X 4.50” (Width) X 3.00” (Height)

Flatten Bottom Surface for Easy Direct Hood Mount or Stick Mount

2.0625” (Diamter) X 2.50" (Depth) Pods

Universal Smoke-Tinted Turbo Boost + Oil Temperature + Water Temperature Gauges

Specifics and Benefits:

Enchanting 7-Color LED Display, to Match Interior Lightings at its Best

Stylish Smoke-Tinted Screens

2” Gauge Diameter for 12V Power Source

Universal Aluminum Radiator Water Temperature Gauge Adaptor

Specifics and Benefits:

Made of High Quality Light Weight Aluminum Material

Port Diameter: 38mm/ 1.50"

Overall Dimensions: 2.75" (Length) X 2.25" (Height)

Sensor Port Thread Pitch and Diameter: 1/8 NPT/ 6AN

3.00” Universal Mushroom Type Air Filter

Specifics and Benefits:

Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability

3.00” Filter Inlet, 3.00" Inner Diameter Pipe

Performance: Improves Up to 95% Filtration Efficiency

Micro High Density Foam Gauze Type Filter Material, Washable with Water or Soap, and Reusable

Universal Braided Stainless Steel 10AN Oil Drain Line

Specifics and Benefits:

Stainless Steel Braided Hose 1/2" Inner Diameter 20.00" Length

10AN Fittings Anodized Finish

Weldable 10AN Oil Pan Fitting Included

High Tolerance Manifold Wrap

Specifics and Benefits:

Made of High Quality Synthetic Fabric Material

Tested to Tolerate Extreme Heat and Wearing Corrosions

Dimensions: 2.00" (Width) X 1/16" (Thick) X 600"/ 50' (Length)

100% Brand New
Professional Installation is Highly Recommended (No Instruction Included)

Package Includes:

1 X T25/ T28 Float Bearing Turbocharger

1 X Cast Iron Turbo Manifold

1 X Type-S Blow Off Valve Kit

1 X Flange Pipe

1 X Adjustable Boost Controller

1 X Programmable LED Turbo Timer

1 X Adjustable Fuel Pressure Regulator

1 X Universal Voltage Stabilizer

1 X 16-Row 10AN Aluminum Oil Cooler

1 X Oil Filter Relocation Kit

3 X Oil Lines

1 X Aluminum Oil Catch Tank

1 X Universal Turbo Boost Gauge

1 X Universal Oil Temp. Gauge

1 X Universal Water Temp. Gauge

1 X Universal 52mm Gauge/ Meter Pods

1 X Aluminum Radiator Water Temperature Gauge Adaptor

1 X Mushroom Type Air Filter

1 X Oil Drain Line Kit

1 X Manifold Wrap

1 X Lightweight Aluminum Intercooler

1 X Set of Aluminum Piping

8-Piece Piping Set Includes:

2 X 180 Degree U-Pipe

2 X 90 Degree Pipe

2 X 45 Degree Pipe

2 X Straight Pipe

8 X Silicone Hoses

16 X Bolt-Tight Clamps

Hardware, such as Gasket(s) and Bolt(s), if is Shown in the Picture Above

Application:

85-91 Toyota Corolla AE86 (with Wide Valve Angles)
(GTS/ FX16 Models ONLY)

85-89 Toyota MR2
(GT Models ONLY)

88 Chevrolet Nova
(Twin Cam Models ONLY)

90-92 Geo Prizm
(GSi Models ONLY)

and More Non-US Market Models:

1983 June - 1985 AA63 Carina (Japanese Market)

1985 - 1988 AT160 Carina (Japanese Market)

1988 - 1992 AT171 Carina (Japanese Market)

1983 Aug - 1985 AA63 Celica

1985 - 1989 AT160 Celica

1983 Oct - 1985 AT141 Corona (Japanese Market)

1985 - 1988 AT160 Corona (Japanese Market)

1984 June - 1989 AW11 MR2

1984 Oct - 1987 AE82 Sprinter (Japanese Market)

1983 May - 1987 AE86 Sprinter Trueno (Japanese Market)

1987 - 1992 AE92 Sprinter 1987–1992 (Japanese Market)

1986 - 1993 AE86/AE92 Corolla GLi Twincam/Conquest RSi (South African Market)

(ALL Models Above with a 4A-GE I4 1.6L DOHC Engine ONLY)

Please Check Compatibilities for Years and Models

Modification might be Required for Some Vehicles

* Professional Installation Highly Recommended! No instructions included! *

DOMESTIC LOWER 48 US STATES:	$0.00
AK / HI / PR / PO BOX:	$299.98
CANADA:	$299.98
REST OF THE WORLD:	$798.98
SALES TAX:	CA ONLY

Shipping Information:

VERY IMPORTANT: Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

Please use Shipping & Payments tab on top of page for shipping details for your location.

Shipping to PR, HI, AK and PO Box addresses will be charged the same as shipping to Canada. GU, VI, SAIPAN will be charged the same as international shipping rate.

For Canada shipping please select the lowest price. We do not offer expedited shipping.

US Territories such as GU, VI, SAIPAN will be charged the same as international shipping rate. Transaction will be held until a full shipping amount received.

Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

Customer assumes shipping charges incurred in shipping to undeliverable address.

International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

We are not responsible for any changes to address after item has been shipped.

Return policy:

14 Days money back, please notify us within 14 days after you've received your purchased item.

All return requests must be submitted through your eBay account.

You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.

Buyers pay for return shipping fee.

Items to be returned must be in re-sellable condition.

All returns are for refund ONLY. No exchange accepted.

Returns for refund are subject to a 20% restocking fee.

Terms & Conditions:

For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.

All items do not come with installation instruction unless otherwise specified.

If item is questionable, please consult your local professional/mechanic before making purchase.

Contact:

Please use the "Ask A Question" form above to contact us. Please note that we only work from 9am-6pm PST M-F but are OFF on the weekends so messages sent after business hours especially on Friday, will be answered the following Monday.