BendPak 9,000 LB  4-Post Lift HD-9XW Standard Width High
The HD-9XW is your 9,000-lb. rugged lifting solution if you need get something heavy up high, but you don’t have an entire garage to dedicate to the lift. Perfect for vehicle storage and service—at the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you. This model is available with optional casters, dip-trays, jack platform and more.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

*9,000-pound lifting capacity 
*116-3/4" Wide
*Overall Lenght 224"
*Height of Colums 100"
*Lenght of Run Ways 188"
*Max Rise 82"
*Lifting Time 45 sec.
*Motor 220 VAC/1 Ph

•  

   

  Description

   The space saving design of the 9,000-lb. capacity HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. No special foundation is required and the installation is a cinch. Optional casters enable you to roll the lift outside or wherever best suits your needs. About the size of a typical parking space, this lift truly maximizes valuable floor area. Use the HD-9XW for detailing; storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. If you've got at least standard 8-foot ceiling, this lift will work for you.

  The HD-9SWX is the high rise version of this lift. If you are looking to go wide, but keep it standard height, consider the HD-9SW.
  
  Don't make the mistake of calling the HD-9XW a "hobby lift." Our expert engineers have packed this model with features that were previously only found on commercial-grade designs. Plus, it's a BendPak, so you know it's backed by over 40 years of experience and a reputation that carries just as much weight as our lifts. We're proud to have these HD-Series lifts in our lineup, and you'll be proud to have one in your shop or garage.

   

  The HD-9XW is the standard version of the high-rise lift. If you are looking for a narrow-width model, consider the HD-9STX.

  Dependable design
  4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

  Dual-hub cable sheaves
  Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

  Multi-level locking positions
  The HD-9XW is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

  Heavy-duty aircraft cable
  Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is 640% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

  Electric / hydraulic power system
  We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

  Large base plates
  12" x 12" base plates provide a solid foundation for the HD-9XW.

  Single hydraulic cylinder
   
  Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

  Durable powder-coat finish
  All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder "sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

  Caster kit
  Optional 4-piece caster kit makes your lift portable, with or without car.
  

  Four models to choose from
  Take your pick. You're currently looking at the standard-width, high-rise HD-9XW. The HD-9ST is the narrow model, the HD-9 is the standard-width model and the HD-9STX is the narrow-width, tall model.

  Integrated design
  Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

  Longer approach ramps
  These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

  Automatic safety locks
  Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

  
  

  
  

  Features & Specifications

  • 9,000-lb. maximum lifting capacity
  • Freestanding design
  • High-rise
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1-1/4" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved
  
  
  
  
  
  
  
  
   
  
  
  

  ---

  • Lifting capacity*: 9,000 lbs. / 4,082 kg
    • *Max capacity / front axle: 4,500 lbs. / 2,041 kg
    • *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
  • Overall width: 116-3/4" / 2,965 mm
  • Outside length: 198" / 5,029 mm
  • Overall length: 224" / 5,690 mm
  • Height of columns: 100" / 2,540 mm
  • Runway min height: 4-1/2" / 114 mm
  • Max rise: 82" / 2,083 mm
  • Max lifting height: 86-1/2" / 2,197 mm
  • Width between posts: 106-3/4" / 2,711 mm
  • Runway width: 19" / 483 mm
  • Width between runways: 37-1/4" – 44-3/8" / 952 mm – 1,127 mm
  • Length of runways: 188" / 4,775 mm
  • Min. wheelbase @ rated capacity: 135" / 3,429 mm
  • Min. wheelbase @ 75% capacity: 115" / 2,921 mm
  • Min. wheelbase @ 50% capacity: 95" / 2,413 mm
  • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
  • Locking positions: 15
  • Lock spacing: every 4" / 102 mm
  • Lifting time: 50 sec
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Shipping weight: 2,040 lbs. / 927 kg
  • Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm

  Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.