SquareTrade © AP6.0
|
Nissan Skyline R32/R33
Features:
• Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
• Uses the cars factory sensors
• Supports R32 GT-R twin MAF sensors
• Supports Sequential Injection (peak and hold) and Direct fire ignition
• Windows 2000, XP, Vista, Windows 7 compatible software
• Real time programming, instant hesitation free adjustment while engine is running
• Fully user definable 32 x 32 mapping
• Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
• OBD II Code Storing & Malfunction Indicator Light (MIL) Control * * (Access through laptop
only )
• Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
• Wideband “auto tuning” using user definable target AFR table
• USB and CAN Communication Port
Factory Outputs:
• 6 x Fuel Injector outputs
• 6 x Ignition outputs
• Tacho, Boost Control, AC Clutch Relay, Idle Control
• Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)
• N-VCT ( Nissan Variable CAM Timing Control)
Factory Inputs:
• MAF sensors, Throttle Position Sensor, Oxygen sensors,
• Coolant Temperature sensor, Vehicle Speed Sensor,
• Air Temperature sensor.
Expansion I/O*:
• 2 x Analogue Voltage inputs
• 2 x Analogue Temperature inputs
• 4 x Digital pulsed outputs
*Optional auxiliary harness required to be purchased Haltech Part # HT040003
Functions:
• Closed Loop O2 Control
• Decel Cut Over Boost Rev Limiter
• Closed & Open Loop Boost Control
• Gear Setup
• ACF On Base Tables
• Transient Throttle Enhance
Correction Tables: Fuel Ignition Boost:
• Cranking
• Air Temp Target Correction
• Coolant Temperature Correction
• Map Correction
• Zero Throttle Gear Correction
• Cylinder Trim
• TPS Correction
• Generic Correction 1
• Generic Correction 2
• Gear Correction
• Post Start
• Air Temp Duty Correction
• Post Start
Miscellaneous:
• Data Logging: 448Kb of onboard data logging,
Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
• Max 20 channels logging capability
• Tune can be password protected in software
• Rugged anodized aluminum casing
Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC
Physical Dimensions:
ECU Dimensions Length: 154mm (174mm with MAP nipple) Width: 158mm Height: 42mm Weight: 680g (1.5 lb)
Applications:
Nissan Skyline R32, Nissan Skyline R33 Variations: GT-R, GTS-t
Engine Codes:
RB25DET, RB26DETT
Transmission:
Manual only (Automatic not supported)
The Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)
Software
ECU Manager
ECU Manager is a new generation of user interface software that is used across the whole Haltech Platinum range of ECU’s.
Customizable Displays
ECU Manager allows you to tune your ECU with ease while monitoring all the vital parameters of your engine on easy to read gauges and displays. The intuitive interface, is not only functional, but can be fully customized with multiple user definable display pages that you can create to suit your individual needs.
- Numeric, 2D and 3D views for 3D maps
- Simple drag and drop actions allow gauges to be moved and resized
- New gauges can be added with a few clicks of the mouse
- Tuning pages can be saved and loaded and even e-mailed to share your pages with other Haltech ECU Manager users.
Real Time Tuning
ECU Manager maintains the simple increment and decrement interface that many of our customers have grown accustomed to, but adds additional tuning tools such as linearisation of regions in two dimensions. The expanded tuning tools enables quick and efficient tuning of your engine management tables. All tuning tables utilize the Haltech patented real time tuning technology.
Integrated Tuning Environment
ECU Manager integrates management of your maps, sensor calibration files, software data-logging, on-board data-logging retrieval and device firmware in the one neat package, allowing full control of your ECU.
- PC data-logging
- Data-log playback on tuning screens
- Auto map backup
- Base map library for popular engines*
Online Help
Extensive Help pages are accessible from within ECU Manager to provide convenient access to information required for installing, setting up and tuning your ECU.
Minimum System Requirements
1GHz processor; 128MB graphics card 3D; 250MB HDD space; Windows 2000 SP4, Windows XP, Windows Vista, Windows 7
Minimum screen resolution: 1024 x 768 pixels
* Please note that base maps have very simple fuel and ignition maps that are intended to help start your engine only. They are not to be used for engines that will have any load applied. Engines driven on these maps may be damaged as a result. Haltech Engine management systems takes no responsibility for engine damage as a result of misusing the provided base maps.
Datalog Viewer
Datalog Viewer allows display and analysis of data-logs, generated from the ECU Manager and Platinum Series products.
Display Graphs
Display up to 4 graphs, with each graph capable of overlaying all logged channels simultaneously.
- Zoom in and out
- Move cursor to display trace values
Math Channels
Additional channels can be created using mathematical formulas applied to a logged channel.
Minimum System Requirements
1GHz processor; 128MB graphics card 3D; 250MB HDD space; Windows 2000 SP4, Windows XP, Windows Vista, Windows 7.
Minimum screen resolution: 1024 x 768 pixels.
Downloads:
Don’t see what you want? Contact us about getting a combo or custom listing for any of the hundreds of manufacturers we carry.
If you are unsure about fitment, applications, technical specifications, or any other questions, please contact us at eBay message service before buying.
SERIOUS BIDDERS ONLY
| Our Company | |
| Alamo Autosports opened in 1992 and specializes in Japanese and European import vehicles. We are a full service performance shop located in the Dallas/Fort Worth Metroplex. We carry over 250 OEM and aftermarket performance product lines, as well as custom fabrication CNC work, tuning, and all of your performance needs . Services and products we offer:
| |
| Payment | Returns |
| BUY IT NOW items are to be paid in immediately. Payment must be received in full within 3 business days. All auctions not paid for within 3 days will be reported to ebay for request of the final value fee credit. Paypal
Sales Tax Texas residents will be charged state sales tax. | Contact us before returning any items. Returns will be considered on a case-by-case basis. No returns on special order parts. The item must be returned in its original condition and in the original manufacturer’s packaging. Wheels that had tires mounted cannot be returned. Buyer is responsible for return postage. 20% RESTOCKING FEE Return Shipping Address Alamo Autosports Attn: eBay Department 1218 Colorado Ln Suite C3 Arlington, TX 76012 |
| Shipping | |
| Orders are shipped directly from our location or from the manufacturer/ warehouse location. Pick-up and Will Call is available upon request. Tracking number will be updated in Payal and eBay when shipped. We will only ship to confirmed Paypal addresses. Delivery It is your responsibility to accept delivery in person and inspect the package before accepting delivery. Please make sure to open the box immediately when taking delivery, to avoid potential issues. Do not sign for any damaged package and report it to driver immediately. Shipping Carriers All items are shipped via:
Please contact us at eBay message service for this shipping option. | |
| Messages | Inventory |
| Please allow 1-2 business days for responses. We receive hundreds of messages a day and we answer them as quickly as possible. Call us at eBay message service for immediate assistance. | All products are in stock when listed on eBay. If you need the product ASAP, call us directly at eBay message service before bidding. |
Business Hours
Monday – Friday
9:30AM – 6:30PM
Central Standard Time Zone (GMT -06:00)
Daylight Savings Time
Closed Saturday and Sunday
Contact Information
Phone: eBay message service
