Electronic Ignition Conversion Kit
for
Porsche 912E, 914, 924 (4-cyl)
Porsche 356, 912 (4-cyl)
911, 911E, 911L, 911S, 911T, Carrera (6-cyl)
Replaces Points and Condenser - Never Adjust Points or Timing Again!
The Hot-Spark electronic ignition conversion kit replaces breaker points and condenser in the distributor to provide rock-solid reliability. With the Hot-Spark electronic ignition, dwell and timing are always spot-on accurate.
No matter how strong your engine is, you won't get the most out of it without a good spark. The stock Bosch ignition system used technology that dates back a century - to the Kettering system, which was introduced in the 1910 Cadillac. Even though you can adjust breaker points for near-electronic ignition performance, they will burn and wear within a few thousand miles, long before the recommended replacement interval. With points, the timing will drift; power and fuel economy will suffer.
The Hot-Spark electronic ignition conversion kit delivers a strong spark every time and is maintenance-free. You'll notice quicker starts, more top end power and a little gas mileage boost. It's as easy to install as points and condenser!
Advantages of the Hot-Spark electronic ignition conversion kit:
Replaces points and condenser with solid-state electronics
Set it and forget it - Never adjust points and timing again!
Zero maintenance
Delivers far more voltage to the spark plugs than points-based points
Reliable Hall-effect technology
Never gets out of adjustment
Rock-steady reliability
Dwell and timing are always spot-on accurate
Increased gas mileage, fuel economy
Quick starting
Smooth idling
Cleaner emissions
Longer spark plug life
Longer engine life
Cleaner engine oil due to less unburned fuel
Longer interval between oil changes
Easy to install - If you can install points, you can install the Hot-Spark electronic ignition conversion
No points to wear, burn, pit or corrode
No condenser needed
Absolutely no points float - zero - even at redline RPM and beyond!
Never worry about drifting dwell or timing again
No rubbing parts - nothing to wear out!
Fits completely under the distributor cap
Stealth modification - maintains stock appearance
Includes everything you need, no external ignition box required.
Works with stock distributor and coil
Encased in high-temp thermoplastic - protected from the elements and oil, grease, dirt, water, etc.
Never bother with points or condenser again!
The best investment you'll ever make for your vehicle
Saves precious ($$$) fuel
4-cylinder: Stock Bosch points coil with 3.0 Ohms or more internal, primary resistance or HS34HEC high-energy coil required.
6-cylinder: Coil with 1.5 Ohms or more internal, primary resistance or HS17HEC high-energy coil required.
Requires a 12-volt, negative ground electrical system.
How many miles until the Hot-Spark electronic ignition conversion kit pays for itself? Click here
Three-year replacement warranty
Measuring Coil Resistance (and more): www.Hot-Spark.com/Coil.htm
The Hot-Spark electronic ignition conversion kit is as easy to install as points and condenser!
Virtually all 4-cylinder, air-cooled Porsche distributors have right-hand points. Some 6-cylinder Porsche distributors have left-hand points; some have right-hand points. Please compare the points in your Bosch distributor to the photo of points below:
Determine whether your Bosch distributor has single-piece points, as early (pre-1968 or so) Bosch distributors typically have 2-piece points. If it has 2-piece points, a brass pivot pin will remain, standing up from the breaker plate, after you remove the points.
Note: Some Porsche 911 cars have a distributor with left-hand pivot pin points. The 3BOS6U1 will fit only distributors with
1-piece, right-hand pivot pin points.
If your Bosch 6-cylinder distributor has 1-piece, left-hand pivot pin points, order the
3BOS6U2L.
Please compare the points in your 911's distributor with the points in the above
photo before ordering and attach a memo to your PayPal payment, specifying
whether your 911 distributor has left-hand (3BOS6U2L) or right-hand (3BOS6U1)
points.
For 12-volt, negative ground
electrical systems only.
Hot-Spark Electronic Ignition Conversion Kits for Bosch Distributors:
3BOS4U1
4-cylinder distributors with 1-piece points, right hand pivot pin - US
$49.99
Contact breaker points Bosch part no. 1 237 013 044/051/063/065/066 JFU4
3BOS4U2L
4-cylinder distributors with 1-piece points, left hand pivot pin - US $69.99
Contact breaker points Bosch part no. 1 237 013 052/059/061/062 JFUR4
3BOS4C2 4-cylinder
distributors with 2-piece points, right hand pivot pin, without vacuum advance
unit - US $69.99
Contact breaker points Bosch part no. 1 237 013 000 [not for 006/026/039] -
12-volt, negative ground only
3BOS4C2-6N 4-cylinder
distributors with 2-piece points, right hand pivot pin, without vacuum advance
unit - US $69.99
Contact breaker points Bosch part no. 1 237 013 000 [not for 006/026/039] -
6-volt, negative ground only
3BOS4V2 4-cylinder
distributors with 2-piece points, right hand pivot pin, with vacuum advance unit
- US $69.99
Contact breaker points Bosch part no. 1 237 013 006/026/039 [not for 000]
3BOS4V2L
4-cylinder distributors with 2-piece points, left hand pivot pin - US $69.99
Contact breaker points Bosch part no. ....
3BOS6U1
6-cylinder distributors with 1-piece points, right hand pivot pin, and small*
type shaft lobes - US $69.99
* hexagonal part of distributor shaft 15.5mm measured across the flat sides
(17.5mm across the corners) JFU6
Contact breaker points Bosch part no. 1 237 013 044/051/063/065/066/112
3BOS6U2L
6-cylinder distributors with 1-piece points, left hand pivot pin, and small*
type shaft lobes - US $69.99
* hexagonal part of distributor shaft 15.5mm measured across the flat sides
(17.5mm across the corners) JFUR6
Contact breaker points Bosch part no. 1 237 013 052/059/061/062/082
3BOS6U3
6-cylinder distributors with 1-piece points, right hand pivot pin, and large*
type shaft lobes - US $69.99
* hexagonal part of distributor shaft 18.6mm measured across the flat sides
(20mm across the corners)
Contact breaker points Bosch part no. 1 237 013 044/051/063/065/066
3BOS6U3L
6-cylinder distributors with 1-piece points, left hand pivot pin, and large*
type shaft lobes - US $69.99
* hexagonal part of distributor shaft 18.6mm measured across the flat sides
(20mm across the corners)
Contact breaker points Bosch part no. 1 237 013 052/059/061/062
3BOS6C2
6-cylinder distributors with 2-piece points, right hand pivot pin (type on top
in picture), and small* type shaft lobes - US $69.99
* hexagonal part of distributor shaft 15.5mm measured across the flat sides
(17.5mm across the corners)
Contact breaker points Bosch part no. 1 237 013 000 [not for 006/026/039]
3BOS6C2-6N
6-cylinder distributors with 2-piece points, right hand pivot pin (type on top
in picture), and small* type shaft lobes - US $69.99
* hexagonal part of distributor shaft 15.5mm measured across the flat sides
(17.5mm across the corners)
Contact breaker points Bosch part no. 1 237 013 000 [not for 006/026/039]
6-volt, negative ground only
3BOS6C3 6-cylinder
distributors with 2-piece points, right hand pivot pin (type on top in picture),
and large* type shaft lobes - US $69.99
* hexagonal part of distributor shaft 18.6mm measured across the flat sides
(20mm across the corners)
Contact breaker points Bosch part no. 1 237 013 000 [not for 006/026/039]
3BOS6V2 6-cylinder
distributors with 2-piece points, right hand pivot pin (type below in picture),
and small* type shaft lobes - US $69.99
* hexagonal part of distributor shaft 15.5mm measured across the flat sides
(17.5mm across the corners)
Contact breaker points Bosch part no. 1 237 013 006/026/039
3BOS6V3 6-cylinder
distributors with 2-piece points, right hand pivot pin (type below in picture),
and large* type shaft lobes - US $69.99
* hexagonal part of distributor shaft 18.6mm measured across the flat sides
(20mm across the corners)
Contact breaker points Bosch part no. 1 237 013 006/026/039
3BOS6V2L 6-cylinder
distributors with 2-piece points, left hand pivot pin, and small* type shaft
lobes - US $69.99
* hexagonal part of distributor shaft 15.5mm measured across the flat sides
(17.5mm across the corners)
Contact breaker points Bosch part no. 1 237.....
3BOS6V3L 6-cylinder
distributors with 2-piece points, left hand pivot pin, and large* type shaft
lobes - US $69.99
* hexagonal part of distributor shaft 18.6mm measured across the flat sides
(20mm across the corners)
Contact breaker points Bosch part no. 1 237.....
For 12-volt, negative ground electrical systems only, unless noted otherwise.
Porsche 4-Cylinder
For 12-volt, negative ground electrical systems only
Bosch Distributor VE 4 BRS 383 (VE4BRS383) -
3BOS4C2
Bosch Distributor VJ 4 BR 9 (VJ4BR9)-
3BOS4C2
Bosch Distributor VJR 4 BR 18 (VJR4BR18) -
3BOS4C2
Bosch Distributor 0 231 129 022 -
3BOS4C2
Bosch Distributor 0 231 129 031 -
3BOS4C2
1948-1955 Porsche 356 - Bosch VE4BRS383 -
3BOS4C2
1955-66 Porsche 356 - Bosch 0 231 129 022 (with right-hand, 2-piece points) -
3BOS4C2
1956-1957 Porsche 356 - Bosch VJ4 BR9 (VJ4BR9) -
3BOS4C2
1958-1963 Porsche 356 - Bosch VJR4 BR18 (VJR4BR18) -
3BOS4C2
1964-1967 Porsche 356/912 - Bosch 0 231 129 022 -
3BOS4C2
1966-67 Porsche 912 - Bosch 0 231 129 022 (with right-hand, 2-piece points) -
3BOS4C2
1968-69 4-cyl 912 (with 1-piece, left-hand points) -
3BOS4U2L
1968-69 4-cyl 912 (with 1-piece, left-hand points) Bosch 0 231 115 061 -
3BOS4U2L
1968-69 Porsche 912 - Bosch 0 231 129 031 -
3BOS4U1
1969-79 Porsche 912, 914, 924 - Bosch 0 231 170 xxx -
3BOS4U1
1970-76 Porsche 914 - 3BOS4U1
1976 Porsche 912E - 3BOS4U1
1976-77 Porsche 924 - Bosch 0 231 170 202, 0 231 176 064 -
3BOS4U1
1969-72 Porsche 914, 914/4 - Bosch 0 231 172 007, 0 231 174 001, 0 231 175 001 -
3BOS4U1
1972-73 Porsche 914 (1.7 Liter) - Bosch 0 231 175 005 -
3BOS4U1
1973-74 Porsche 914 (1.8 Liter) - Bosch 0 231 168 009 -
3BOS4U1
1972-75 Porsche 914 (2.0 Liter) - Bosch 0 231 174 009, 0 231 174 011 -
3BOS4U1
1976-81 Porsche 924 - Bosch 0 231 170 202 -
3BOS4U1
All air-cooled Porsche retrofitted with these Bosch 4-cyl distributors (12 volt,
negative ground only):
Bosch VE 4 BRS 383 (VE4BRS383) (with 2-piece, right-hand points) - 3BOS4C2
Bosch VJ 4 BR 8 (VJ4BR8) (with 2-piece, right-hand points) - 3BOS4C2
Bosch VJ 4 BR 9 (VJ4BR9) (with 2-piece, right-hand points) - 3BOS4C2
Bosch VJR4BR18 (with 2-piece, right-hand points) - 3BOS4C2
Bosch VJ 4 BR 24 (VJ4BR24) (with 2-piece, right-hand points) - 3BOS4C2
Bosch VJ 4 BR 25 (VJ4BR25) (with 2-piece, right-hand points) - 3BOS4C2
Bosch 0 231 129 010 - 3BOS4C2
Bosch 0 231 129 019 (JFR4) (with 2-piece, right-hand points) - 3BOS4C2
Bosch 0 231 129 022 - 3BOS4C2
Bosch 0 231 170 034 - 3BOS4U1
Bosch 0 231 178 009 - 3BOS4U1
Bosch 9 230 081 050 - 3BOS4U1
Bosch 9 230 081 094 - 3BOS4U1
Porsche 6-Cylinder (12-volt, negative ground electrical systems only)
1965-67 6-cyl 911, 911S, 911T, non-vacuum-advance (with 2-piece, right-hand
points) - 3BOS6C2
1968 Porsche 911L, 911T (with 1-piece, left-hand points) - 3BOS6U2L
1968-1969 Porsche 912 (with 1-piece, left-hand points, vacuum-advance) -
3BOS6U2L
1969-71 6-cyl 911, 911E, 911S, 911T (with 1-piece, right-hand points) - 3BOS6U1
All '72 911 models, and some early '73 models used:
1972-73 Porsche 911T 2.4L Bosch 0 231 169 003 - 3BOS6U1
1972-73 Porsche 911E 2.4L Bosch 0 231 169 004 - 3BOS6U1
1972-73 Porsche 911S 2.4L Bosch 0 231 169 005 - 3BOS6U1
Later '73 911 models used:
1973 Porsche 911T 2.4L Bosch 0 231 169 008 - 3BOS6U2L
1973 Porsche 911E 2.4L Bosch 0 231 169 009 - 3BOS6U2L
1973 Porsche 911S 2.4L Bosch 0 231 169 010 - 3BOS6U2L
1972-73 Porsche 911, 911E, 911S, 911T - to May, 1973 (with 1-piece, left-hand
points) - 3BOS6U2L
1972-73 Porsche 911, 911E, 911S, 911T models, to May, 1973 (with 1-piece,
left-hand points) - 3BOS6U2L
1973 911, 911E, 911S, 911T models to May, 1973 (with 1-piece, right-hand points)
- 3BOS6U1
1973-1974 Porsche 911E (with 1-piece, right-hand points) - 3BOS6U1
1973-1977 Porsche 911S (with 1-piece, right-hand points) - 3BOS6U1
1974-1975 Porsche 911 Carrera (with 1-piece, right-hand points) - 3BOS6U1
1974-77 911, 911S, Carrera (with 1-piece, right-hand points) - 3BOS6U1
1974-77 Porsche 911, 911S - Bosch 0 231 184 001 (with 1-piece, right-hand
points) - 3BOS6U1
1973 6-cyl 911, 911E, 911S, 911T models to May, 1973 (with 1-piece, right-hand
points) - 3BOS6U1
1974-77 6-cyl 911, 911S, Carrera (with 1-piece, right-hand points) - 3BOS6U1
Porsche 6-cylinder with Bosch Distributor Numbers:
0 231 121 006 - 1965-67 911 - 3BOS6C2
0 231 142 003 - 3BOS6U1
0 231 159 001 - 1966-67 911T 2.0 L, 1967 911L 2.0 L - 3BOS6C2
0 231 159 002 - 1967 911S 2.0 L - 3BOS6C2
0 231 159 006 - 1969-71 911E 2.0/2.2L - 3BOS6U1
0 231 159 007 - 1969-71 911S 2.0/2.2 L - 3BOS6U1
0 231 159 008 - 1970-72 914/6 2.0L - 1970-71 911T 2.2L - 3BOS6U1
0 231 162 001 - 3BOS6U1
0 231 162 002 - 3BOS6U1
0 231 169 001 - 1968 2.0 – 3BOS6U1
0 231 169 003 - 1972-73 911T 2.4L - 3BOS6U1
0 231 169 004 - 1972 911E 2.4L - 3BOS6U1
0 231 169 005 - 1972 911S 2.4L - 3BOS6U1
0 231 169 008 - 3BOS6U2L
0 231 169 009 - 3BOS6U2L
0 231 169 010 - 3BOS6U2L
0 231 184 001 - 1974-77 Porsche 911, 911S - 3BOS6U1
0 231 184 002 - 3BOS6U1
0 231 184 003 - 3BOS6U1
0 231 184 004 - 3BOS6U1
0 231 184 006 - 3BOS6U1
0 231 184 007 - 3BOS6U1
0 231 184 008 - 3BOS6U1
0 231 185 009 - 3BOS6U1
0 231 185 010 - 3BOS6U1
0 231 185 011 - 3BOS6U1
0 231 187 001 - 3BOS6U1
0 231 187 002 - 3BOS6U1
VJR6BR62 - 3BOS6C2
Various Bosch 4-cylinder, Non-Vacuum-Advance Distributors with 2-Piece, Right-Hand Points:
0 231 100 041 - 3BOS4C2
0 231 110 041 - 3BOS4C2
0 231 129 010 - 3BOS4C2
0 231 129 019 - 3BOS4C2
0 231 129 022 - 3BOS4C2
0 231 153 009 - 3BOS4C2
VE4BRS383 - 3BOS4C2
VJ4BR8 - 3BOS4C2
VJ4BR9 - 3BOS4C2
VJR4BR11 - 3BOS4C2
VJR4BR18 - 3BOS4C2
VJ4BR24 - 3BOS4C2
VJ4BR25 - 3BOS4C2
International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Electronic Ignition Conversion Kit for all 4-cylinder Bosch Distributors with 1-piece, right-hand pivot-pin points (JFU4) |
|||||||||||||||
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in many Bosch 4-cylinder distributors, including VW, Porsche, Volvo-Penta marine engines, BMW, Alfa-Romeo, Volvo, Saab, etc. Fits 4-cylinder Bosch vacuum-advance and centrifugal-advance-only distributors with 1-piece, right-hand pivot pin points.
|
||||||||||||||
|
3.4 Ohms primary resistance 10K Ohms secondary resistance |
||||||||||||
High secondary resistance for more voltage at the plugs Ideal for Use with Hot-Spark 4-cyl Electronic Ignition Conversion Kits with red 3-series ignition module |
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 45,000 volts to the spark plugs - more turns
of copper wire than other standard-sized canister coils.
Application:
Ideal for 4-cylinder distributors. Provides more primary resistance to protect from
overheating due to high-voltage or high-temperature environments.
Designed specifically to produce maximum spark
when used
with Hot-Spark red electronic ignition conversion kits
(red ignition module). Also excellent for points-based
distributors - high primary resistance helps reduce points burning, pitting.
Epoxy-filled
canister (not oil-filled) to withstand high-vibration
environments
Rugged, mirror-polished case -
won't chip or peel like chrome-plated coil canisters.
Standard 56mm (2.2 in.) coil
diameter - fits stock coil clamps.
In Stock:
Available:
|
|||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in Bosch
4-cylinder distributors. Fits 4-cylinder Bosch vacuum-advance and
centrifugal-advance-only distributors with 1-piece, left-hand pivot pin points.
For Distributors:
Bosch
4-cylinder, centrifugal-advance and vacuum-advance distributors with
1-piece, left-hand pivot
pin points. Application:
Bosch Distributor:
0 231 115 061
to 1977 Renault - All models with Bosch Distributors (1-piece, left-hand points)
12V
negative ground only.
Coil Required:
Coil must have 3.0 Ohms or more
internal primary resistance.
HS34HEC high-energy coil
recommended. In stock:
Available:
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch 4-cylinder, non-vacuum-advance distributors with 2-piece, right-hand pivot pin points.
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch 4-cylinder, vacuum-advance distributors with 2-piece, right-hand pivot pin points. Will not fit early Bosch distributor with large distributor cap.
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in many 6-cylinder Bosch vacuum-advance distributors. Also fits Bosch 6-cylinder, centrifugal-advance-only distributors.
|
||||||||||||
|
1.7 Ohms primary resistance 10K Ohms secondary resistance |
||||||||||||
High secondary resistance for more voltage at the plugs Ideal for Use with Hot-Spark 6- and 8-cyl Electronic Ignition Conversion Kits with red 3-series ignition module |
Heavy-duty, high-energy coil with extra turns of copper wire in the
secondary windings for as much as 45,000 volts to the spark plugs - more turns
of copper wire than other standard-sized canister coils - twice as much as many
other coils.
Application:
For 6- and 8-cylinder (3-series) electronic
ignition conversion kits
Designed specifically to produce maximum spark
when used
with Hot-Spark red electronic ignition conversion kits
(red ignition module).
Also for points-based ignition systems
Epoxy-filled
canister (not oil-filled) to withstand high-vibration
environments
Rugged, mirror-polished case -
won't chip or peel like chrome-plated coil canisters.
Standard 56mm (2.2 in.) coil
diameter - fits stock coil clamps.
In Stock:
Available:
|
|||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in many 6-cylinder Bosch vacuum-advance distributors. Also fits Bosch 6-cylinder, centrifugal-advance-only distributors. Magnet sleeve fits 18.6mm distributor shaft lobes.
|
||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in Bosch
6-cylinder distributors. Fits 6-cylinder Bosch vacuum-advance and
centrifugal-advance-only distributors with left-hand pivot pin points.
For Distributors:
Bosch
6-cylinder, centrifugal-advance and vacuum-advance distributors with
left-hand pivot
pin points. Application:
1970 Mercedes-Benz 280SE, SEL, Bosch
distributor 0 231 116 061 1968
Porsche 911L, T Volvo-Penta with Bosch distributor:
0 231 116 060
0 231 116 054
The 6-cylinder magnet sleeve fits Bosch distributor shaft cam
lobes measuring about 16mm from edge-to-edge, not
the larger 18.6mm cam lobes.
A 16mm box-end wrench (ring spanner) should fit comfortably over the distributor shaft lobes.
12V
negative ground only.
Coil Required:
Coil must have 1.5 Ohms or more
internal primary resistance.
HS17HEC high-energy coil
recommended. In stock:
Available:
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in Bosch
6-cylinder distributors. Fits 6-cylinder Bosch vacuum-advance and
centrifugal-advance-only distributors with 1-piece, left-hand pivot pin
points (18.6mm distributor shaft lobes)
For Distributors:
Bosch
6-cylinder, centrifugal-advance and vacuum-advance distributors with
1-piece, left-hand pivot pin points (18.6mm distributor
shaft lobes) Application:
The 6-cylinder magnet sleeve fits Bosch distributor shaft cam
lobes measuring about 18.6mm from edge-to-edge, not
the smaller 16mm cam lobes.
12V
negative ground only.
Coil Required:
Coil must have 1.5 Ohms or more
internal primary resistance.
HS17HEC high-energy coil
recommended. In stock:
Available:
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch 6-cylinder, non-vacuum-advance distributors with 2-piece, right-hand pivot pin points.
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch
6-cylinder, non-vacuum-advance distributors with 2-piece, right-hand pivot pin
points.
For Distributors:
6-cylinder, non-vacuum-advance Bosch
distributors with 2-piece, right-hand pivot pin points.
For centrifugal-advance-only distributors. Not for
vacuum-advance distributors.
For Bosch 6-cyl distributors with distributor
shaft lobes measuring 18.6mm, instead of 16mm.
Application:
Certain Bosch 6-cyl, non-vacuum-advance distributors with
2-piece points
If a Bosch distributor has 2-piece points, an upright pivot
pin will remain, standing up from the breaker plate, after the
points have been removed.
For Bosch 6-cyl distributors with distributor
shaft lobes measuring 18.6mm, instead of 16mm.
12V
negative ground only
Coil Required:
Coil must have 1.5 Ohms or more
internal primary resistance.
HS17HEC high-energy coil
recommended. In stock:
Available:
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch
6-cylinder, vacuum-advance distributors with 2-piece, right-hand pivot pin
points.
For Distributors:
6-cylinder, vacuum-advance Bosch
distributors with 2-piece, right-hand pivot pin points.
For vacuum-advance distributors. Not for
non-vacuum-advance distributors. Also available in 4-cylinder
version (3BOS4V2).
Bosch Distributors:
0 231 116 040 Application:
Certain Mercedes-Benz, Volvo-Penta, Porsche, etc., with vacuum-advance
distributors with 2-piece points
Bosch - Right Hand, 2-piece Points (CW)
If a Bosch distributor has 2-piece points, an upright pivot
pin will remain, standing up from the breaker plate, after the
points have been removed.
12V
negative ground only
Coil Required:
Coil must have 1.5 Ohms or more internal primary resistance.
HS17HEC high-energy coil
recommended. In stock:
Available:
|
||||||||||||||
|
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch
6-cylinder, vacuum-advance distributors with 2-piece, left-hand pivot pin
points.
For Distributors:
6-cylinder, vacuum-advance Bosch
distributors with 2-piece, left-hand pivot pin points.
For vacuum-advance distributors. Not for
non-vacuum-advance distributors. Also available in 4-cylinder
version (3BOS4V2L).
Bosch Distributors:
0 231 116 051
Application:
Certain Mercedes-Benz with vacuum-advance
distributors with 2-piece, left-hand points
Mercedes-Benz:
1967 6-cyl 250SE Bosch 0 231 116 051 - 3BOS6V2L
1968-69 6-cyl 280SE, SL, 300SEL Bosch 0 231 116 051 - 3BOS6V2L
0 231 116 051
If a Bosch distributor has 2-piece points, an upright pivot
pin will remain, standing up from the breaker plate, after the
points have been removed.
12V
negative ground only
Coil Required:
Coil must have 1.5 Ohms or more internal primary resistance.
HS17HEC high-energy coil
recommended. In stock:
Available:
|
||||||||||||||
|
Electronic Ignition Conversion Kit for 6-cylinder, non-vacuum-advance Bosch Distributors with 2-piece, right-hand pivot-pin points, 6-volt, negative ground only |
|||||||||||||||
Easy to Install - Replace Points and Condenser with Solid-State Electronics |
Electronic Ignition Conversion Kit. Replaces points and condenser in certain Bosch 6-cylinder, non-vacuum-advance distributors with 2-piece, right-hand pivot pin points. 6-volt, negative ground only.
|
||||||||||||||
|
for 4-cylinder, air-cooled VW and Porsche |
Replacement distributor for air-cooled VW & Porsche 4-cylinder engines. Replaces stock distributor or 009/050 distributors. Requires vacuum source from carburetor or throttle body. With 3BOS4U1 electronic ignition installed, instead of points/condenser. Everything you need included - no external ignition box required.
|
||||||||||||||
|
Foreign Orders: Shipping discount available if purchasing multiple items.
Click here for HotSpark Ignition Installation Instructions
Just a better idea. TM
© 2005-2013 HotSpark®