Buy for a future brake job!!!

This is a Truebend metal brake line replacement kit. All lines are supplied double-flared at each end with S.A.E. specified male inverted flare fittings attached with the special metric nut for Japanese built cars. These maliable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. Four couplers are included to join lines where necessary. Instructions are also included.

 The average  Datsun or Nissan takes 24 feet of brake line to do system to the wheels,
 this kit has 40 feet of lines in four inch increments to fit all the various configurations.
Use the extra lines for another project!

Here are the variety of lengths included in this kit:

 

6 inch

8 inch 

12 inch

16 inch

20 inch (two of these) 

23 inch

27 inch

30 inch 

33 inch

37 inch

40 inch

43 inch 

47 inch

51 inch

60 inch

four unions to joint lines together

instructions for installation

A total of 20 lines and unions!!

 

Our TrueBend® brake lines resist corrosion, vibration, fatigue and shock from impact. They are coated for corrosion protection in compliance with GM132M-ASV and SAE J527B.  Each line is manufactured by double wrapping a copper coated steel strip to form a double wall tube.  Then, the tube is furnace brazed to fuse the copper/steel tube into one continuous and seamless tube.  The tube is then given a outer coat for corrosion and abrasion resistance. These lines are the strongest and safest avai; yet can still be easily bent without kinking or without damaging the  outer coat.

This kit contains all the lines to do a wide variety of  cars, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects

The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. 

If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store.

All unions are solid brass to stop rust.

All lines are made in USA or Canada and are the stock 3/16" outer diameter with a factory flare.

Fits the years:  72 1972 73 1973 74 1974 75 1975 76 1976 77 1977 78 1978 79 1979 80 1980 81 1981 82 1982 83 1983 84 1984 85 1985 86 1986 87 1987 88 1988 89 1989 90 1990 91 1991 92 1992 93 1993 94 1994 95 1995 96 1996 97 1997 98 1998 99 1999