Despite what a bike salesman tells you - every modern motorcycle has compromises normally instigated by accountants rather than engineers.  One such compromise is the materials used for the brake hoses on your motorcycle.  Rubber hoses or mild steel fittings are cheap, but we all know how rubber hose bulges under pressure, allows brake fluid to absorb water vapour from the atmosphere, and the mild steel fittings rust.  We manufacture a complete replacement stainless steel brake line kit for any motorcycle which is fitted with a hydraulic brake system and we only ever use stainless steel fittings for the motorcycle marketplace.  In doing so, we can offer the HEL Lifetime Warranty on all brake line kits.


They are manufactured from the highest quality stainless steel swaged fittings permanently attached to a stainless steel braided Teflon hose.

The HEL Performance Brake Line fittings offer safety, security and a slim line attractive finish. All hoses can be supplied to the FMVSS-106 standard and the kits contain all items required for a complete installation including stainless steel banjo bolts and copper washers.
 

We have again changed the industry for the better by informing riders of the dangers of using Aluminium brake line fittings on stainless steel hose. When an aluminium fitting is placed on a stainless steel hose and the two parts are contaminated by salt water a reaction takes place between the metals which corrodes the aluminium fitting - Don't settle for anything other than stainless steel as this is what can happen...

To get a link that describes how and why this happens, just call or email us.

********************

Nobody likes spongy or soft feeling brakes and you should never second guess the durability of your braking system. 

********************

Manufactured by riders for riders!  

moto-heaven.com & HEL Performance USA owner Phil Caudill in action

*********************

Clear rigid tubing to protect front line

Stainless Steel Banjo Bolts

Copper Crush Washers

Instruction Manual

Lifetime Warranty Registration Card

HEL Decals
    
 

(Example kit shown in Solid Red with Polished ends)

These lines are DOT approved as well Dekra, ADR, TUV, and others worldwide.

If your bike model is not listed in this auction, please contact us.

We can manufacture lines for any bike, and will fill custom or extended line orders as well.

Please specify upon ordering:

Bike Make

Bike Model (Displacement)

Bike Year

Desired colors

You can do so if using PayPal during checkout in "notes to seller", by email , or you can contact us by phone with the proper information. 

We need this information before we can ship your lines as different years may call for different lengths and fitting orientation.

(1-814-489-3379)  

Please feel free to contact us with any questions.

HEL brake lines are manufactured of the highest quality stainless steel fittings permanently swaged onto a hard drawn tensile stainless steel braided Teflon hose and wrapped with a colored pvc cover to protect your bodywork and paint.  This eliminates the 'spongy' feeling often found with rubber hoses under extreme braking conditions- when you need the performance the most.  The stainless steel exterior provides excellent resistance to both corrosion and abrasion.  The swaged fittings give a streamlined finish and a secure connection.  Unlike some other steel braided brake lines, HEL lines are DOT approved for all on and off-road applications.

HEL braided brake lines use a Teflon PTFE interior rather than a standard PTFE interior allowing HEL brake lines to be bent 18,000,000 times without rupturing compared to 750,000 times like other competing products - That's 24 times the strength!  HEL braided motorcycle brake lines can also withstand 18,000 psi without failure. Other braided brake lines can only withstand up to 5,000 psi.  HEL lines also come with a lifetime warranty registration card.

HEL brake lines are manufactured of the highest quality stainless steel fittings permanently swaged onto a hard drawn tensile stainless steel braided Teflon hose and wrapped with a colored pvc cover to protect your bodywork and paint.  This eliminates the 'spongy' feeling often found with rubber hoses under extreme braking conditions- when you need the performance the most.  The stainless steel exterior provides excellent resistance to both corrosion and abrasion.  The swaged fittings give a streamlined finish and a secure connection.  Unlike some other steel braided brake lines, HEL lines are DOT approved for all on and off-road applications.

HEL braided brake lines use a Teflon PTFE interior rather than a standard PTFE interior allowing HEL brake lines to be bent 18,000,000 times without rupturing compared to 750,000 times like other competing products - That's 24 times the strength!  HEL braided motorcycle brake lines can also withstand 18,000 psi without failure. Other braided brake lines can only withstand up to 5,000 psi.  HEL lines also come with a lifetime warranty registration card.

 

Customize your lines by choosing from one of our 19 colors: 

And choose what color ends you would like as well-

(Titanium  option, including Ti bolts +$98)

 

 

Color bolt upgrades now available for a nominal charge!

Still wondering why to Choose HEL Performance Products?

-Solid Company History & Experience

HEL (Hose-Equip Limited) Performance Products was established in 1985 as an authorized Aeroquip distributor and we quickly gained a reputation in the Industrial, Marine, and Automotive Performance marketplace for a friendly approach to both quality and service. This developed into us becoming an authorized MOD contractor and an ISO9002 quality assured company. Quality is at the fore front of what we are as a company today 

After many years supplying both hoses and fittings to the major UK names in performance plumbing we decided to launch a new system of motorcycle brake lines which didn't compete directly with reusable brake line products. Since the introduction of the system, we have seen our competition bring out their own versions of the swaged brake line system which strengthens our original decision to offer a tamper evident, safer, permanently attached brake line fitting to the marketplace.

As with most things in life, people only remember first place and there are no prizes for second. HEL Performance was the first company to offer only fully swaged ends in the UK and you can now see the rest of the industry following our lead by offering swaged ends as well. We were also the first manufacturer in the industry to offer a free pvc cover to protect the bodywork and paintwork of your motorcycle. The first and still only manufacturer in the world to offer coloured stainless steel fittings as a safe replacement to the dangerous coloured aluminium brake line fittings. We were the first to offer an online shopping area which has now been replicated by other companies in the industry. 

We feel that the industry has been taken forward by the instigation of our radical and exciting concepts and designs. We know that by changing the industry over to the swaged brake line format we have made braking a safer and better industry for the consumer. 

Always First

We always look to the future. Our company has always been at the forefront of technology, design, and material choices in the motorcycle brake line industry. We are still the only manufacturer in the world offering colored stainless steel fittings and we are also always adding to our range with new and fresh ideas. 

Our Titanium brake line fittings offer the customer for the first time the ability to obtain a strong yet light brake line fitting using the highest quality and specialist materials available anywhere in the world - and for the first time these kits are able to be offered for thousands of motorcycles.

Be Number One. HEL Performance.

    

Thanks for looking and for your business -moto-heaven

moto-heaven.com owner and rider for the 2009 AMA MotoGT Champions - Crozier Motorsports

 About Auction Feedback- I love to give positive feedback.  And if you follow the auction rules you will receive it.  However, because of the volume, I don't get a chance to go in and update feedback for those who have paid all that often.  So, if you'd like feedback quickly, then leave me feedback as soon as you get your items and I will see this on my main eBay screen and respond with feedback immediately.  I have not received negative feedback from anyone who has contacted me about an issue or problem and/or given me a chance to resolve it.  In fact even when I've sent out the correct parts but given incorrect info, I've done a swap or credit for the right parts for them.  I see a problem as an opportunity to really provide great service and gain a lifetime customer- not that I want an issues to come up.

Attention AOL users - Due to the high volume of questions we answer from AOL subscribers, we are occasionally put on their Blacklist because their servers think we sending SPAM.  This is not true and we do not send any unsolicited emails.  Nevertheless, if you don't get a response from us in regards to a question or order within 24 hours please call us.  Our Tech Line is 814-489-3379, our Toll Free Order line is 1-877-416-0969, and cell is 484-951-3128.