This is a pair of brand new up/down vertical replacement motors for 02-08 Dodge Ram 1500 and 03-08 Dodge Ram 2500,3500 trucks with power seats. They will bolt in to replace your factory units. They are not used, but brand new. You will get both the rear and front vertical motors. Please check the following numbers on the individual motors. These replace part numbers:
Front tilt
Gen II B
Vertical
8-82991 or L0110346AA01
5609780 or 5719240Rear tilt
Gen II B
Vertical
8-82992 or L0110344AA01
5609820 or 5719230
You will have to reuse your tube nut off the old shaft. The factory constant section ring must be removed off the old shaft in order to unscrew the tube nut. The constant section ring is a thick piece of wire that holds a bushing on the end of the shaft. If removing the section ring becomes a problem, you can cut the old shaft close to the motor and unscrew the tube nut from the cut end. This is the method I prefer.The screw holding the tube nut on the new shaft is left hand thread. A small socket can be used to tighten it, but you might have to spread the ends apart some. This won't affect the operation of the motor assembly.
Detailed install instructions with photos are included.
Refunds: Unit must not be damaged or altered. Since I offer
free shipping, actual shipping cost to you will be deducted from purchase price
refund.
Please contact me with
any questions.