Ccd Ntsc Twin Double Rear View Camera 12-24v 120 ° / 150 ° Crafter Van Sprinter on 2040-parts.com

120 ° / 150 ° "Twin" - rear view camera
for use in the transport, truck, RV or trailer

Double security in your vehicle thanks to the new "twin rear view camera "!

The first module provides a detection angle of 150 ° and so detects the immediate vicinity behind the vehicle. The second module has a detection angle of 120 ° and is suitable for the detection of the Rear traffic.

Impeccable view even in the dark

The "twin addition has rear view camera " 12 infrared diodes (per camera) that automatically hinzuschalten at twilight and thus allow for a classic image in total darkness.

Strong in outdoor use

The aluminum housing is weather-resistant and produced solid. The area of ​​application is thus virtually no limits if you want to use it on the car, bus, camper, truck, trailer, etc., almost anything is possible.

It comes complete with connecting cable, mounting foot, "grommet" and assembly material (See delivery).

reviews:

Guide about the "detection angle" / "Viewpoint" with reversing cameras.

Reversing camera with 60 ° detection angle:

To make it as easy as possible to clarify what kind of impact the selected detection angle of the rear view camera, we recorded the representation of three different rear view cameras.

The but very small angle of 60 ° does not cover too much in width, but nevertheless illustrates the more "obstacles" in depth. Characterized the camera for monitoring the "blind spot" or for monitoring the immediate surroundings behind the vehicle is not suitable, since not the complete width of the vehicle is detected. The use of this camera could be used as digital rearview mirror for detecting the rear traffic, in agriculture for control of conveyer belts etc..

In contrast, a reversing camera with 170 ° detection angle:

The detection angle of 170 ° is enormous, it is extremely Captures much content in width. This is usually done through various wide-angle lenses. This has the disadvantage that the edges or the edge region are distorted. Content in the depth are shown very small, so you should use the camera only to monitor the immediate near range to be able to detect, for example in the license plate bar, or even in the trailer operation to the full swinging when maneuvering.

The middle ground, reversing camera with 120 ° detection angle:

From experience to her rear-view cameras have proved best with 120 ° detection angle. You easily capture the entire width of the vehicle, do not produce distortion and still provide a good representation of depth. For example, when mounted on the mobile home or even at the transporter, in the usual height of 2.30 meters, the camera already recorded more than 4 meters in width. aligned Down "barriers" are also in the deep well represented (see figure) Also suitable as a "spy camera" in the bumper of a car,. We carry this the reversing camera or STO STO-IR. For use at the mobile home or the Transportation, we have for example to the rear view camera IR18.