Chene Style Boat Sm. Anchor & 100 Foot Line Slip Ring on 2040-parts.com

This Listing  is for one Chene Slip Ring Anchor with 100 foot Hollow Braid Line. The manufacturer rates this anchor for boats 12 - 25 feet in length. However, based on customer reports and our own experience, we feel this anchor would be more appropriately used for boats 12' - 18'. Please see my other auction for larger or smaller anchors. 

Includes 100' of Hollow Braid Yellow Anchor Line

• 3/8''X 100' Long
• Hollow Braid
• Safe Working Load: 360 LBS
• Tensile Strength: 1800 Pounds
• 100% Polypropylene
• Includes Anchor Snap Ring
• UV Inhibitors
• Stores Wet
• High Tenacity
• Ready to Use

Exclusive Chene Anchor Features:

• 100 percent Retrievable: The angle of the slip-ring shank allows the anchor to be 100 percent retrievable. It's the only anchor that can be retrieved straight up without the use of a seperate trip line
• Requires 70% less anchor Line: The 45 degree holding position enables the anchor to perform best with a 2:1 ratio of anchor line to depth (unlike the 7:1 ratio recommended for other fluke style anchors)
• No Anchor Chain Required

Anchor Proudly Made in the USA!

Features:

• Quick Penetration
• Excellent Holding Power
• Danforth Style Design
• Excellent Value
• Recommended for Boats 12' - 18' in Length  (always use one size larger for storm anchors)
• Protective Finish
• Exclusive Slip-ring design for 100% retrievability

Dimensions are as follows:

• Length: 11 inches,
• Width: 11.25 inches,
• Length of Flukes: 8.5  inches,
• Weight: 4 pounds.

These anchors work off of mechanical advantage, not total weight. The weight of this anchor is listed for reference. Do not be concerned about the low weight of these anchors as Fluke style anchors do not rely on weight to hold.

 Please see our Ebay store for more Marine Supplies, Vinyl Graphics, Autobody Supplies, Car Care Products and Used Car Parts. If you do not see what you want please E-mail me and I will list a Specific Auction for you!

Shipping is Actual Cost.  Please use Shipping Calculator for a Quote. Please E-mail us for a quote if you would prefer a different shipping method. We will accept returns ONLY IF the item is in new unused condition and in it's original packaging. All returns must be authorized. We can not refund shipping cost

If you have any questions please contact us!

 

Copyright Disclaimer: "Danforth" is a registered trademark of Tie Down Engineering. The term "Danforth" is used for general descriptive purposes to describe the style of this anchor. It is in no way used to imply that this anchor is affiliated with Tie Down Engineering in any way. All photos on this listing are property of Underwoods Auto & Marine LLC and are not to be used or copied in any way without the expressed permission of the owner.  

 

Frequently Asked Questions: Anchoring

 

What size anchor do I need?  The recommended boat size for each anchor is listed above. Anchors are tested under ‘’Average Conditions’’. If you frequently anchor in High Winds / Stormy conditions, Rough water / Swift Current,  Poor Bottom conditions, or if you have a High Profile boat we recommend using an anchor one size larger.

 

This anchor looks small for my boat and isn’t very heavy?  Danforth style anchors get their holding power from mechanical design. Therefore, it is not necessary for the anchor to be excessively large or heavy to work.

 

Do I need to use an Anchor Chain with this Anchor? It Is necessary to use an anchor chain with Danforth style anchors. The length of chain helps the anchor set by holding the anchor stock down. If used without a chain, Danforth anchors may not set correctly.

It is not necessary to use a chain with Chene Style Anchors.  Navy style, Mushroom, River, and Richter anchors may benefit from the use of anchor chain but will also work without.

 

How much Anchor Line do I need? A Ratio of 5:1 is considered to be the minimum scope for most anchors. This means that for every foot of water depth, 5 feet of line is required. For example: to anchor in 30 feet of water, 150 feet of line is required. This is a important aspect of anchoring to remember. If the anchor line is too short the anchor may fail to set or break free easily. The Chene and Richter anchors we carry are exempt from this requirement

 

What style of anchor is best for my boat? The style of anchor used is as much personal preference as it is science. Each anchor on the market has advantages and disadvantages.  Please see each item description for specific advantages to each anchor design and recommended anchoring conditions.

 

Should I use a Solid Stock or Slip Ring Design? If you have decided to use a Danforth Style anchor then you need to decide if you want a Solid Stock or Slip Ring design. The anchors holding power will be the same for both designs. A Solid Stock anchor will be slightly less susceptible to damage due to its solid steel stock. The Slip Ring style offers easier retrieval  when used in rocks and other easy snag bottom conditions

 

Is this anchor protected against corrosion? Yes, All of the anchors we sell are protected against corrosion. Each manufacturer uses different types of coatings so please see each item description for the type of coating used.

 

Is this anchor made in the USA? We strive to carry as many American Made Products as possible and many of our anchors are made in the USA. Every item that is made in America will display ‘’ Proudly Made in the USA’’ in the item description

 

Why is the shipping cost so high? We only charge actual UPS shipping cost and do not profit from shipping. Unfortunately, due to the size and weight of some anchors shipping can be expensive. We always combine shipping on items when possible.

 

 

Important Note: These answers should be used as general guidelines only and should not be substituted for Professional Advice. We have no way of foreseeing every condition these anchors may be used in. If you are not confident in which anchor you require, we recommend contacting your boat’s manufacturer or local authorities to get information on any specific conditions unique to your application. All item images and item descriptions on this listing are property of Underwoods Auto & Marine LLC and are not to be used, copied, or otherwise reproduced without written permission. The Term ‘’Danforth’’ is property of Tie Down Engineering. The Term ''Richter'' and the Richter Design are property of Greenfield Products Inc.

 

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.