Find or Sell any Parts for Your Vehicle in USA

Chevrolet Ls1 Ls2 Ls6 210cc 64cc Assembled Aluminum Cylinder Heads Pro Header on 2040-parts.com

Location:

Fresno, California, United States

Fresno, California, United States
Condition:New Brand:SCE Pro header Surface Finish:Cast Aluminum Manufacturer Part Number:SCE-401 Warranty:Yes

Hello This auction is for a new pair,(2) Pro header LS cylinder heads for LS1 LS2 LS6 1999 AND UP CHEVROLET ENGINES
Chevy LS1 LS2 LS6 210cc 64cc cathedral Assembled Aluminum Cylinder Heads. These Heads are much better than stock GM heads, you will get easily 55-60hp gains!! These new heads castings WE CNC Machine and assemble, that is why and how we have no issues!!, bolt on performance and reliability!. Heads are Brand new and all components are brand new parts with no corners cut! We sell a lot of heads making small dollars with a lot of sales to make big dollars we want a lot of users happy!!. Please look close at all the pictures you can see we do all CNC Machine work in house!! with expert people who assemble the heads for trouble free service. Heads have all bolts holes for all stock accessory brackets, no special brackets needed,  no special intakes or exhaust needed, run Stock stuff or aftermarket  parts with no problems and great performance!!. All specs are listed as follows,




Part Type:Cylinder Heads
  
Cylinder Head Style:Assembled
Cylinder Head Material:Aluminum
Cylinder Head Finish:Natural
Combustion Chamber Volume (cc):64 cc


Intake Runner Volume (cc): 

Exhaust Runner Volume (cc):
210 cc (CFM Intake Runner at .600  245.6)
76 cc (CFM Exhaust at  .600  168.7)




Intake Port Shape: Cathedral
Intake Port Location: Standard
Exhaust Port Shape: Oval
Exhaust Port Location: Standard
Comp. Valve Job: 

Seat Pressures:

Seat Pressure W/O Inner Spring:
Yes 

Closed 135

Closed 105
Intake Valves Included: Yes
Intake Valve Diameter (in): 2.020 in.
Exhaust Valves Included: Yes
Exhaust Valve Diameter (in): 1.575 in. 
Valve Springs Included: 

 Yes (Double Springs up to .680 lift) 

Retainers Included: Yes
Locks Included: Yes
Valve Stem Seals Included: Yes 
Rocker Arm Studs Included: No 
Rocker Arms Included: No 
Rocker Arm Nuts Included: No 
Guideplates Included: No 
Valve Cover Mounting Style: Perimeter Bolt
Accessory Bolt Holes Drilled: Yes 
Intake Valve Angle: 45 deg.
Exhaust Valve Angle: 45 deg.
Valve Guides Included: Yes 
Valve Guide Material: Bronze 
Valve Seats Machined: Yes
Valve Seat Machine Style: 3-angle
Valve Seat Material: Ductile iron 
Oiling Style: Through pushrod 
Machined for O-Ring: No 
Heat Crossover: No
Quantity:Sold in Sets of Two
Parts Used in Assembly as follows: 
  • 1.575" one piece swirl polished stainless steel severe duty exhaust valves (Qualcast) .312 stems
  • 2.020" one piece swirl polished stainless steel severe duty intake valves (Qualcast) .312 stems
  • 1.320" OD X 2.235 True Double Springs  (Qualcast)
  • New Hardened 1.300 Retainers 7°
  • New Hardened 312 Valve Locks
  • New 312  Positive Control Seals
  • New .015" Valve Shim
  • Springs,
    Engine: LS1 LS2 LS6
    Number Of Coils: Dual Spring
    Damper Spring: No
    Overall Diameter: 1.320" OD
    Inside Diameter: .676" ID
    Spring Height: 1.800"
    Seat Pressure: 145 lbs @ 1.800"
    Open Pressure: 385 lbs. @ 1.150"
    Coil Bind: 1.100"
    Spring Rate (lbs./in.): 375 lbs/in
    Max Lift: .680"
These heads are assembled and have 135 pounds closed seat pressure. If that is too much you can remove the inner spring and that will put you at 105 Pounds closed seat pressure which is more for a stock replacement. These heads are assembled and ready to final clean and install, No beehive springs here!! We do all cnc maching and assembly of heads in house! These heads are comparable to Pro header AFR Dart world Edelbrock pro comp speedmaster GM. Thanks for looking!!

Cylinder Heads for Sale

Smog could get worse as more people buy diesels

Fri, 04 Apr 2014

Britain could see an increase in smog as the popularity of diesel cars increases, warns a leading pollution expert from King’s College London. The smog-like conditions that have descended on the UK over the past week have been caused by dust blown across from the Sahara Desert mixing with harmful pollution in urban areas. This pollution comes from industry, as well as both petrol and diesel cars.

News watch August 2011: today's auto industry news

Wed, 31 Aug 2011

Come to CAR Magazine's news aggregator as we round up the daily stories in the auto industry. Top tip: news summaries are added from the top hour-by-hour Wednesday 31 August 2011• The two millionth Mini today rolled off the production line at Plant Oxford. British prime minister David Cameron drove the landmark car off the line (Mini)• Volkswagen says it will sell more than 2 million cars in China this year.

Rise in illegal 'clocking'

Tue, 15 Apr 2014

MORE ‘CLOCKED’ cars are on the UK’s roads now after a rise in 2013 of cars with discrepancies in their recorded mileages. Experts say this signals a worrying trend of more dishonest car sellers ‘clocking’, or falsifying, a car’s mileage to make more money when the sell it. There had been a drop in the number of recorded incidences of clocking.