Find or Sell any Parts for Your Vehicle in USA

Chevy 427 Ls3 Ls7 Ls1 / 635 Horsepower Complete Crate Engine /pro-built/408 New! on 2040-parts.com

US $11,490.00
Location:

Wittmann, Arizona, United States

Wittmann, Arizona, United States
Condition:New Warranty:Yes Part Brand:CHEVROLET

MARK'S PERFORMANCE ENGINES

*************************************

WORLDWIDE SHIPPING AVAILABLE

*************************************

NEW CHEVY 427 (7.0L) LS3 LS6 LS7 LS1 LS2 / 635 HORSEPOWER -  574 FT/LBS OF TORQUE COMPLETE STREET / STRIP STROKER CRATE MOTOR!!

PROCOMP CNC PORTED ALUMINUM LS3 HEADS (THESE ARE THE SAME AWESOME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST.  SEE DETAILS BELOW)!!

2 YEAR / UNLIMITED MILE WRITTEN WARRANTY!!!

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

**********************************

**"BUY BEFORE END OF AUCTION SPECIAL"  (HURRY!!! DO "BUY IT NOW" & TAKE $800 OFF THE "BUY IT NOW" PRICE BEFORE END OF AUCTION & GET FREE SHIPPING (WITHIN CONTINENTAL USA)(ONLY $11,490 TOTAL PRICE)!! SEE DETAILS BELOW!!

HUGE PRICE DROP (OFF OUR NON-EBAY PRICE)!

REGULAR NON EBAY PRICE = $13,490

** THE PRICE WILL GO BACK UP! **

**********************************

CHEVY LS 427 COMPLETE STROKER 635 HORSEPOWER FOR ONLY $11,490 (WITH "BUY BEFORE END OF AUCTION SPECIAL".  SEE BELOW)...WOW!!!

4.070" BORE  X  4.100" STROKE = 427 CID

** SUPER STRONG IRON 6.0L BLOCK (MUCH STRONGER THAN ALUMINUM & ONLY 70 LBS. HEAVIER)!!! **

EASY / NO HASSLE INSTALL....EASY RETRO-FIT INTO YOUR STREET / STRIP VEHICLE (NO CONFUSING COMPUTERS, FUEL INJECTION, TUNING, & WIRING HARNESS TO HASSLE WITH)!!!

**INCLUDES THE HP CARB, HP INTAKE, IGNITION COILS, IGNITION COIL BRACKETS, SPARK PLUG WIRES, SPARK PLUGS, AND OIL PAN AS PICTURED (SEE BELOW)!!**

WAKE UP YOUR STREET/STRIP CAR/TRUCK WITH THIS BRUTAL YET TOTALLY STREETABLE CRATE MOTOR!!!

UPGRADE YOUR MACHINE TO AWESOME CHEVY MODERN LS TECHNOLOGY...

**PROCOMP CNC-PORTED LS3 15 DEGREE ALUMINUM RECTANGULAR PORT CYLINDER HEADS (INCREDIBLE AIRFLOW....SEE FLOW NUMBERS BELOW)!!  (THESE ARE THE SAME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST.  THESE ARE DEDICATED RECTANGULAR PORT LS3 CASTINGS!!  FAR SUPERIOR TO OEM HEADS!!  SEE DETAILS BELOW)!! 

**6 BOLT MAINS (INCREDIBLE STRENGTH)!!!

**LS MOTORS DON'T LEAK & ARE SUPER DEPENDABLE!!!

THE SOUND OF HORSEPOWER AS SOON AS YOU TURN THE KEY!  THE RUMBLE SENT THROUGH THE EARTH, AND COMING OUT THE PIPES WILL THRILL YOU!!!

 POWER & SOUND OF A SERIOUS BIG BLOCK AT A SMALL BLOCK PRICE!!!  LIGHTWEIGHT YET HEAVY HITTING PACKAGE!!! 

THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT (427 CUBIC INCHES OF CHEVY LS POWER)!!!

PROCOMP LS3 CNC-PORTED ALUMINUM RECTANGULAR PORT CYLINDER HEADS WITH BIG 279 CC INTAKE RUNNERS!!!

2 YEAR / UNLIMITED MILE WRITTEN WARRANTY!!!

 MARK'S PERFORMANCE ENGINES LS 427 cubic inch Carbureted "Retro- Fit" engine.  Here's EVERYTHING YOU NEED to install our 635 HORSEPOWER - 574 FT/LBS OF TORQUE 427 cubic inch powerhouse into your ride!  MARK'S PERFORMANCE ENGINES LS 427 is built using a 6.0L GM Block and Heads, along with our Forged Crank, Rods and Pistons. The engine includes a High Performance Hydraulic Roller Cam and Lifters, LS3 Rockers, Universal-Fit Oil Pan, GMPP Single Plane Intake Manifold, AND 1050 "DOMINATOR" CFM (4500 SERIES) CARB & INTAKE !!   Also includes Sensors & Coil Packs.  Not included: Water pump, front-drive accessories/brackets/pulleys, and Module to fire the ignition...

*** LS ENGINE CONVERSIONS ARE GETTING MORE POPULAR EVERY DAY.  TRANSFORM YOUR OLD LOW PERFORMANCE STREET/STRIP MUSCLE CAR / HOTROD / TRUCK INTO A MODERN HIGH HORSEPOWER ROCKET TODAY!! GIVE US A CALL!!!

RACE-TEC / JE FORGED HP PISTONS!!!

EAGLE FORGED 4340 FORGED STROKER HP CRANKSHAFT!!!

SCAT 4340 FORGED STROKER HP CONNECTING RODS!!!

COMP CAMS HYDRAULIC ROLLER "LSR" HP CAMSHAFT

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

**"BUY BEFORE END OF AUCTION SPECIAL"  (HURRY!!! DO "BUY IT NOW" BEFORE END OF AUCTION & GET FREE SHIPPING (WITHIN CONTINENTAL USA)(ONLY $11,490 TOTAL PRICE)!!! 

REGULAR NON EBAY PRICE = $13,490

WOW!!!!

CALL WITH ANY QUESTIONS & FOR CUSTOMER SERVICE!!

MARK'S PERFORMANCE ENGINES

(623)388-2834

WHY SETTLE FOR AN OLD-FASHIONED GEN 1 & LITTLE SBC 350 OR 383 WHEN YOU CAN HAVE 427 CUBIC INCHES OF MODERN LS POWER???!!!

ALL NEW / NEVER INSTALLED IN VEHICLE!


CALL
MARK'S PERFORMANCE ENGINES: (623)388-2834 
OPEN 8AM-6PM MST (M-F) , 8AM-4PM MST (SAT) 
 

CALL US NOW FOR DETAILS!!

@@@@  ALL NEW / PRO-BUILT / MACHINED / ASSEMBLED IN A STATE-OF-THE-ART FACILITY............NO HOME-BUILT JUNK!!!  @@@@


HORSEPOWER: 635 @ 6500 RPM, TORQUE: 574 FT./LBS @ 5000 RPM. (VERY STREETABLE / PUMP GAS FRIENDLY)! 

AWESOME PERFORMANCE & MUSCLECAR LOPE/IDLE YET VERY STREETABLE & DEPENDABLE!

CAN BE USED WITH A DAILY DRIVEN PUMP GAS CAR/TRUCK, DRAG CAR, MARINE AND OTHER APPLICATIONS!

BLOCK: CHEVY LS 6.0L GEN III 

HEADSNEW PROCOMP  CNC PORTED LS3 HP ALUMINUM WITH BIG 279 CC INTAKE RUNNER RECTANGULAR PORT CYLINDER HEADS (WITH ALL NEW HP BIG 2.165"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides, 68 CC COMBUSTION CHAMBERS).  NOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS....CHECK OUT THE AWESOME FLOW NUMBERS BELOW!!  (THESE ARE THE SAME  AWESOME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST)!!!

CRANKSHAFT: NEW EAGLE 4.100 STROKE LARGE RADIUS FORGED  

CONNECTING RODSNEW SCAT 6.125" 4340 FORGED W/ ARP CAP SCREW HP ROD BOLTS

PISTONS: NEW RACE-TEC / JE FORGED HP Pistons (Compression Ratio: 11.0:1....PUMP GAS FRIENDLY)  

MACHINE WORK:
Oven Baked / Shottabrated / Jet Washed & Magnifluxed (Completely Cleaned & Checked For Cracks)
Cylinders Bored (WITH TORQUE PLATE) & Finished Computer Honed To Within .0001'' Straightness & Roundness
Align Honed Main Bearing Bores/Saddles
Square Decked Parallel To Crankshaft
Re-Size Connecting Rods With New Quality Rod Bolts Installed
Balanced & Blueprinted
PROFESSIONALLY Assembled


ALL NEW PARTS:

  1. PROCOMP CNC-PORTED LS3 HP ALUMINUM WITH BIG 279 CC INTAKE RUNNER CYLINDER HEADS (WITH ALL NEW HP BIG 2.20"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides, 68 CC COMBUSTION CHAMBERS).  NOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS....CHECK OUT THE AWESOME FLOW NUMBERS BELOW!!  (THESE ARE THE SAME  AWESOME CYLINDER HEADS USED IN HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST)!!!
  2. EAGLE 4.100" STROKE LARGE RADIUS 4340 FORGED CRANKSHAFT
  3. RACE-TEC / JE FORGED HP Pistons (Compression Ratio: 11.0:1....PUMP GAS FRIENDLY)!
  4. SCAT 6.125" 4340 FORGED  CONNECTING RODS W/ ARP CAP SCREW HP ROD BOLTS
  5. COMP CAMS BIG "LSR" HYDRAULIC ROLLER HP CAMSHAFT (#54-472-11)(ADVERTISED DURATION: 293I / 309E; DURATION @ .050": 243I / 259E; LIFT: .624"I / .624"E; LOBE SEPERATION: 114)(AWESOME MUSCLECAR LOPE YET STREETABLE)!  
  6. MAHLE HP Piston Rings (BEST RINGS ON THE PLANET)! 
  7. CLEVITE CL-77 Rod/Main/Cam Bearings 
  8. CLOYES True Roller HP Timing Set
  9. ARP Connecting Rod Bolts (180,000 p.s.i) 
  10. SPEEDMASTER ALUMINUM HP High Rise Single-Plane Intake Manifold
  11. GM PERFORMANCE PARTS LS3 Rocker Arms 
  12. FEL-PRO Gasket Set
  13. GM PERFORMANCE PARTS Oil Pump
  14. GM PERFORMANCE PARTS Oil Pump Pickup Screen
  15. GM PERFORMANCE PARTS UNIVERSAL-FIT "MUSCLE CAR" Oil Pan (FITS EVERYTHING) 
  16. GM PERFORMANCE PARTS LS3 CORVETTE Harmonic Balancer  
  17. ELGIN Pushrods 
  18. GM Block Plugs
  19. STANDARD MOTOR PRODUCTS Sensors (CRANK POSITION SENSOR, CAM POSITION SENSOR, OIL PREASURE SENSOR)     
  20. HOLLEY Valve Covers (LOOK LIKE STOCK GM UNITS, BUT HAVE EXTRA CLEARANCE FOR HIGH LIFT CAMS.  ALSO ELLIMINATE THE COIL BRACKETS FOR A CLEANER LOOK)!
  21. GM Head Bolts
  22. Fasteners (Intake Manifold, Valve Covers, Oil Pan)
  23. GM Coil Packs
  24. Spark Plug Wires
  25. NGK Spark Plugs
  26. SPEEDMASTER "DOMINATOR" 1,050 CFM (4500 SERIES) CARBURETOR, HOLLEY'S new HP Series mechanical secondary carburetors are ASSEMBLED IN THE USA, utilizing a high-flow carburetor main body. Features include adjustable screw-in air bleeds, high performance down-leg boosters, a high rate airflow section design, a solid billet throttle baseplate, and an adjustable secondary airflow cam bracket. They also have timed and full vacuum tubes for accessories and ease of tuning, a welded throttle shaft, button Torx head throttle plate screws, power valve blowout protection, slip link mechanical linkage, and more. What does all this add up too? Easy--dyno proven horsepower and torque gains without breaking the bank! (INCLUDED)!
  27. GM PERFORMANCE PARTS CORVETTE ALUMINUM WATERPUMP TO MAKE IT TURNKEY(OPTIONAL: ADD $300).
  28. GM PERFORMANCE PARTS SERPENTINE FRONT-DRIVE ACCESSORY/BRACKET/PULLEY KIT (150 AMP Alternator & Bracket, PS Steering Pump & Bracket, V7 AC Compressor & Bracket, Idler/Tensioner, Alternator/Water Pump/PS Steering Belt, AC Belt TO MAKE IT TURNKEY(OPTIONAL: ADD $990).

CHECK OUT THE FLOW #'S BELOW OF THESE AWESOME PROCOMP CNC-PORTED LS3 ALUMINUM CYLINDER HEADS!  THESE TRULY ARE THE MOST BANG-FOR-THE-BUCK VALUE IN CHEVY LS CYLINDER HEADS!  

Cylinder Head Flow Numbers

Intake Flow

Exhaust Flow

.100
.200
.300
.400
.500
.600
.700

71.5
158.7
229.8
290.6
327.3
359.5
377.0

 .100
 .200
 .300
 .400
 .500
 .600
 .700

 59.1
 123.2
 174.1
 218.4
 240.4
 252.5
 260.6

 

Install This AWESOME Crate Motor In Your LSx / LS1 / LS2 / LS3 / LS6 / Z06 / LQ4 / LQ9 / L92 / CHEVROLET/ GMC / CAMARO / NOVA / VEGA / EL CAMINO / CHEVELLE / MALIBU / CORVETTE / CHEVY II / IMPALA / VEGA / BISCAYNE / BEL-AIR / STATION WAGON / PICKUP / TRUCK / SILVERADO / SCOTTSDALE / CHEYENNE / SUBURBAN / CARRY-ALL / NOMAD / C/K SERIES TRUCK / 1/2 TON / 3/4 TON / 1 TON / C10 / C20 / C30 / 1500 / 2500 / 3500 / PONTIAC / GTO / BUICK / OLDSMOBILE / GMC / DEL RAY / DEL REY / T-BUCKET / DRAG CAR / DRAG PROJECT / SPEED BOAT / JET BOAT / V-DRIVE / MARINE Application / Or Any Street-Strip Rod/Machine, And Make A Statement When You Open The Hood, And (Or) Nail The Throttle! You Will Surely Enjoy For Years The Performance, Reliability & Awesome Sound This Crate Motor Will Make In Your Street/Strip Machine! This can also be used in place of 6 CYLINDER L6 SBC V6 V8 265 283 302 305 307 327 350 355 377 383 400 402 406 408 427 454 496 502 540

MARK'S PERFORMANCE ENGINES: (623)388-2834
OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT

Eterniti Artemis – now on video

Wed, 25 Apr 2012

Eterniti Artemis now on Video The Eterniti Artemis – previously known as the Hemera – is now officially revealed and here in action on video. As we reported a few days ago, the Eterniti Hemera has become the Eterniti Artemis and arrived at the Beijing Motor Show to parade before its target market. And it’s not unimpressive.

Michelin Challenge Design 2007: How designers handle being 'doored' and other safety issues

Mon, 18 Dec 2006

Ever been 'doored'? Even know what it is?  You do if you're a bicycle, motorcycle or even skateboard rider who has been passing a parked car, truck or SUV at the precise moment one of the vehicle's doors is being opened directly in your path. At its worst, it can be fatal.

Barrett-Jackson's Las Vegas auction draws drivers

Wed, 21 Sep 2011

Though you'll see the usual assortment of restored muscle cars and one-of-a-kind automotive delights at the Barrett-Jackson Las Vegas auction, it's the buyers who make this event a little different, organizers say. "Most of the vehicles we sell in Vegas go to first-time buyers--and they want drivers," said Craig Jackson, CEO of the auction company. "They're end users and drivers, rather than speculators." Those buyers will have a wide variety to choose from at the fourth-annual Barrett-Jackson Las Vegas auction, which kicks off on Sept.