Find or Sell any Parts for Your Vehicle in USA

Chevy 427 Ls3 Ls7 Ls6 Ls1/ 620 Horse Fi Complete Crate Engine /pro-built/408 New on 2040-parts.com

US $12,990.00
Location:

Wittmann, Arizona, United States

Wittmann, Arizona, United States
Condition:New Warranty:Yes Part Brand:CHEVROLET

MARK'S PERFORMANCE ENGINES

*************************************

WORLDWIDE SHIPPING AVAILABLE

*************************************

** "BUY BEFORE END OF AUCTION" BLOWOUT SALE!!! (HURRY!!!  SEE BELOW FOR DETAILS)!!! 

NEW CHEVY 427 LS3 LS6 LS7 LS1 LS2 /

620 HORSEPOWER - 536 FT/LBS OF TORQUE

PROCOMP CNC PORTED ALUMINUM LS3 HEADS (THESE ARE THE SAME AWESOME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST.  SEE DETAILS BELOW)!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!!

2 YEAR / UNLIMITED MILE WRITTEN WARRANTY!!!

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

**********************************

*21-25 MILES PER GALLON FUEL ECONOMY!!!

(*RESULTING FUEL ECONOMY DEPENDS ON MULTIPLE FACTORS LIKE VEHICLE WEIGHT, TRANSMISSION TYPE & GEARING, REAREND GEAR RATIO, REAR TIRE HEIGHT, AERODYNAMICS, AND DRIVING HABITS) 

COMPLETE STREET / STRIP STROKER LS / LSx FUEL INJECTED CRATE MOTOR!!

**********************************

HUGE PRICE DROP (OFF OUR REGULAR NON-EBAY PRICE)!

FUTURE PRICE ON THESE WILL GO BACK UP!

**********************************

COMPLETE CHEVY LS 427 EFI STROKER 620 HORSEPOWER MOTOR PACKAGE FOR ONLY $12,990...WOW!

(REGULAR NON-EBAY PRICE : $14,990)

4.070" BORE  X  4.100" STROKE = 427 CID

THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT!!!

*** SUPER STRONG IRON 6.0L BLOCK (MUCH STRONGER THAN ALUMINUM & ONLY 70 LBS. HEAVIER)!!! ***

EASY / NO HASSLE INSTALL....EVERYTHING YOU NEED TO EASILY FIT INTO YOUR STREET / STRIP VEHICLE!!!  (WHETHER YOUR VEHICLE HAS A CARB OR IS FUEL INJECTED)!!!

  • LS3 Intake
  • LS3 DRIVE-BY-WIRE Throttle Body
  • LS3 Fuel Injectors
  • LS3 Fuel Injector Rails
  • Controller***
  • Engine Harness
  • Mass Air Flow Meter
  • Mass Air Flow Meter Mounting Boss
  • Accelerator Pedal Assembly
  • ALL Sensors
  • Oxygen Sensors (Qty 2 Per Kit)
  • Oxygen Sensor Mounting Boss (Qty 2 Per Kit)
  • Instruction Sheet

 *** INCLUDES CUSTOM TUNED ECM (COMPUTER)!!! *** 

WAKE UP YOUR STREET/STRIP CAR/TRUCK WITH THIS BRUTAL YET TOTALLY STREETABLE CRATE MOTOR!!!

*** LS ENGINE CONVERSIONS ARE GETTING MORE POPULAR EVERY DAY.  TRANSFORM YOUR OLD CARBURATED, GAS GUZZLING STREET/STRIP MUSCLE CAR / HOTROD / TRUCK INTO A MODERN FUEL INJECTED, HIGH HORSEPOWER, GAS FRIENDLY ROCKET TODAY!! GIVE US A CALL!!!

UPGRADE YOUR MACHINE TO AWESOME CHEVY MODERN LS TECHNOLOGY...

** PROCOMP CNC PORTED ALUMINUM LS3 HEADS (THESE ARE THE SAME AWESOME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST.  SEE DETAILS BELOW)!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!! 

** 6 BOLT MAINS (INCREDIBLE STRENGTH)!!!

** GM PERFORMANCE PARTS DRIVE-BY-WIRE LS3 FUEL INJECTION INTAKE MANIFOLD, THROTTLE BODY, MATCHING GAS PEDAL, WIRING HARNESS & CUSTOM TUNED ECM(COMPUTER)!!!  THIS ALL RESULTS IN A SUPER EASY INSTALL!!!

** FUEL INJECTION = PERFECT AIR/FUEL MIXTURES & WILL ALWAYS START RIGHT UP!!! 

** LS MOTORS DON'T LEAK & ARE SUPER DEPENDABLE!!!

THE SOUND OF HORSEPOWER AS SOON AS YOU TURN THE KEY!  THE RUMBLE SENT THROUGH THE EARTH, AND COMING OUT THE PIPES WILL THRILL YOU!!!

 POWER & SOUND OF A SERIOUS BIG BLOCK AT A SMALL BLOCK PRICE!!!  LIGHTWEIGHT YET HEAVY HITTING PACKAGE!!! 

THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT (427 CUBIC INCHES OF HIGH TECH CHEVY LS / LSx POWER)!!!

PROCOMP CNC-PORTED LS3 ALUMINUM RECTANGULAR PORT CYLINDER HEADS WITH BIG 279 CC INTAKE RUNNERS!!!

2 YEAR / UNLIMITED MILE WRITTEN WARRANTY!!!

 MARK'S PERFORMANCE ENGINES LS 427 cubic inch FUEL-INJECTED "Retro- Fit" engine.  Here's EVERYTHING YOU NEED to install our 640 HORSEPOWER 427 Cubic Inch POWERHOUSE into your ride.  MARK'S PERFORMANCE ENGINES LS 427 is built using a 6.0L GM IRON Block and GM PERFORMANCE PARTS ALUMINUM LS3 GEN IV Heads, along with our FORGED Crank, Rods and Pistons. The engine includes a GM PERFORMANCE PARTS LS3 GEN IV High Performance Fuel-Injection Manifold, LS3 High Performance Fuel-Injectors, LS3 Rails, GM PERFORMANCE PARTS LS3 DRIVE-BY-WIRE Throttle Body & MATCHING GAS PEDAL, High Performance COMP CAMS HYDRAULIC ROLLER HP Cam and Lifters, LS3 Rockers, and Universal-Fit Oil Pan.  Also includes Sensors, Coil Packs, Spark Plugs, Spark Plug Wires, Wiring Harness, and a NEW ECM WITH OUR NEW CUSTOM TUNE INSTALLED!!!  Not included: Water pump, front-drive accessories/brackets/pulleys (SEE BELOW).

RACE-TEC / JE FORGED PISTONS

EAGLE 4340 FORGED STROKER CRANKSHAFT

SCAT 4340 FORGED  STROKER CONNECTING RODS

COMP CAMS HYDRAULIC ROLLER "LSR" CAMSHAFT

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

** "BUY BEFORE END OF AUCTION" BLOWOUT SALE.....DO "BUY IT NOW" BEFORE END OF AUCTION (ONLY $12,990 TOTAL PRICE) & GET FREE SHIPPING (WITHIN CONTINENTAL USA)!!! 

REGULAR NON EBAY PRICE : $14,990!!!  

WOW!!!!

CALL WITH ANY QUESTIONS & FOR CUSTOMER SERVICE!!

MARK'S PERFORMANCE ENGINES

(623)388-2834

WHY SETTLE FOR AN OLD-FASHIONED & LITTLE GEN I SBC 350 OR 383 WHEN YOU CAN HAVE 427 CUBIC INCHES OF MODERN LS POWER???!!!

ALL NEW / NEVER INSTALLED IN VEHICLE!


CALL
MARK'S PERFORMANCE ENGINES: (623)388-2834 
OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT 
 

CALL US NOW FOR DETAILS!!

@@@@  ALL NEW / PRO-BUILT / MACHINED / ASSEMBLED IN A STATE-OF-THE-ART FACILITY............NO HOME-BUILT JUNK!!!  @@@@


HORSEPOWER: 620 @ 6500 RPM, TORQUE: 536 FT./LBS @ 5500 RPM. (VERY STREETABLE / PUMP GAS FRIENDLY!)   

AWESOME PERFORMANCE & MUSCLECAR LOPE/IDLE YET VERY STREETABLE & DEPENDABLE!

CAN BE USED WITH A DAILY DRIVEN PUMP GAS CAR/TRUCK, DRAG CAR, MARINE AND OTHER APPLICATIONS!

BLOCK: CHEVY LS 6.0L GEN III 

HEADSPROCOMP CNC-PORTED LS3 HP ALUMINUM WITH BIG 270 CC INTAKE RUNNER CYLINDER HEADS (WITH ALL NEW HP BIG 2.20"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides, 68 CC COMBUSTION CHAMBERS).  NOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS....CHECK OUT THE AWESOME FLOW NUMBERS BELOW!!  (THESE ARE THE SAME CYLINDER HEADS USED IN HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST)!!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!!

CRANKSHAFT: NEW EAGLE 4.100 STROKE LARGE RADIUS FORGED  

CONNECTING RODSNEW SCAT 6.125" 4340 H-BEAM FORGED W/8740 ARP CAP SCREW HP ROD BOLTS

PISTONS: NEW RACE-TEC / JE FORGED HP Pistons (Compression Ratio: 11.0:1....PUMP GAS FRIENDLY)  

MACHINE WORK:
Oven Baked / Shottabrated / Jet Washed & Magnifluxed (Completely Cleaned & Checked For Cracks)
Cylinders Bored (WITH TORQUE PLATE) & Finished Computer Honed To Within .0001'' Straightness & Roundness
Align Honed Main Bearing Bores/Saddles
Square Decked Parallel To Crankshaft
Re-Size Connecting Rods With New Quality ARP HP 180,000 Rod Bolts Installed
Balanced & Blueprinted
PROFESSIONALLY Assembled


ALL NEW PARTS:

  1. PROCOMP CNC-PORTED LS3 HP ALUMINUM WITH BIG 270 CC INTAKE RUNNER CYLINDER HEADS (WITH ALL NEW HP BIG 2.20"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides, 68 CC COMBUSTION CHAMBERS).  NOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS....CHECK OUT THE AWESOME FLOW NUMBERS BELOW!!  (THESE ARE THE SAME CYLINDER HEADS USED IN HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST)!!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!!
  2. EAGLE 4.100 STROKE LARGE RADIUS FORGED CRANKSHAFT
  3. RACE-TEC / JE FORGED HP Pistons (Compression Ratio: 11.0:1....PUMP GAS FRIENDLY)!
  4. SCAT 6.125" 4340 FORGED CONNECTING RODS W/8740 CAP SCREW HP ROD BOLTS
  5. COMP CAMS BIG HYDRAULIC ROLLER HP CAMSHAFT "LSR" CAMSHAFT (#54-470-11)((ADVERTISED DURATION: 285I / 301E; DURATION @ .050": 235I / 251E; LIFT: .624"I / .624"E; LOBE SEPERATION: 113)(AWESOME MUSCLECAR LOPE YET STREETABLE)!  
  6. TOTAL SEAL HP Piston Rings (BEST RINGS ON THE PLANET)! 
  7. Clevite CL-77 Rod/Main/Cam Bearings 
  8. CLOYES True Roller HP Timing Set
  9. ARP Connecting Rod Bolts (180,000 p.s.i) 
  10. GM PERFORMANCE PARTS LS3 FUEL INJECTION HP Intake Manifold
  11. GM PERFORMANCE PARTS LS3 HP FUEL INJECTORS
  12. GM PERFORMANCE PARTS LS3 FUEL INJECTOR RAILS 
  13. GM PERFORMANCE PARTS LS3 "DRIVE-BY-WIRE" 90MM THROTTLE BODY
  14. GM PERFORMANCE PARTS MASS AIR FLOW METER
  15. GM PERFORMANCE PARTS MASS AIR FLOW METER MOUNTING BOSS
  16. GM PERFORMANCE PARTS "DRIVE-BY-WIRE" ACCELERATOR PEDAL
  17. GM PERFORMANCE PARTS LS3 Rocker Arms
  18. GM PERFORMANCE PARTS ENGINE HARNESS
  19. GM PERFORMANCE PARTS OXYGEN SENSORS (QTY 2 PER KIT)
  20. GM PERFORMANCE PARTS OXYGEN SENSOR MOUNTING BOSS (QTY 2 PER KIT) 
  21. GM PERFORMANCE PARTS UNIVERSAL FIT Oil Pan (FITS EVERYTHING)!! 
  22. GM PERFORMANCE PARTS LS3 CORVETTE Harmonic Balancer
  23. FEL-PRO / ENGINE PRO Gasket Set
  24. GM PERFORMANCE PARTS HV Oil Pump
  25. GM PERFORMANCE PARTS Oil Pump Pickup Screen
  26. STANDARD MOTOR PRODUCTS Sensors (CRANK POSITION SENSOR, CAM POSITION SENSOR, OIL PREASURE SENSOR)  
  27. ELGIN Pushrods 
  28. PIONEER Plugs    
  29. HOLLEY Valve Covers (LOOK LIKE STOCK GM UNITS, BUT HAVE EXTRA CLEARANCE FOR HIGH LIFT CAMS.  ALSO ELLIMINATE THE COIL BRACKETS FOR A CLEANER LOOK)!
  30. GM Head Bolts
  31. Fasteners (Intake Manifold, Valve Covers, Oil Pan)
  32. GM Coil Packs & Spark Plug Wires
  33. AC-DELCO Spark Plugs
  34. GM PERFORMANCE PARTS INSTRUCTION SHEET
  35. GM PERFORMANCE PARTS SERPENTINE CORVETTE-STYLE FRONT DRIVE ACCESSORY/BRACKET/PULLEY KIT (150 AMP Alternator & Bracket, PS Steering Pump & Bracket, V7 AC Compressor & Bracket, Idler/Tensioner, Alternator/Water Pump/PS Steering Belt, AC Belt TO MAKE IT TURNKEY(OPTIONAL: ADD $990)
  36. GM PERFORMANCE PARTS CORVETTE ALUMINUM WATERPUMP TO MAKE IT TURNKEY(OPTIONAL: ADD $300).

CHECK OUT THE FLOW #'S BELOW OF THESE AWESOME PROCOMP CNC PORTED LS3 ALUMINUM CYLINDER HEADS!  THESE TRULY ARE THE MOST BANG-FOR-THE-BUCK VALUE IN CHEVY LS CYLINDER HEADS!  

Cylinder Head Flow Numbers

Intake Flow

Exhaust Flow

.100
.200
.300
.400
.500
.600
.700

71.5
158.7
229.8
290.6
327.3
359.5
377.0

 .100
 .200
 .300
 .400
 .500
 .600
 .700

 59.1
 123.2
 174.1
 218.4
 240.4
 252.5
 260.6

 
Install This AWESOME Crate Motor In Your LSx / LS1 / LS2 / LS3 / LS6 / Z06 / LQ4 / LQ9 / L92 / CHEVROLET/ GMC / CAMARO / NOVA / VEGA / EL CAMINO / CHEVELLE / MALIBU / CORVETTE / CHEVY II / IMPALA / VEGA / BISCAYNE / BEL-AIR / STATION WAGON / PICKUP / TRUCK / SILVERADO / SCOTTSDALE / CHEYENNE / SUBURBAN / CARRY-ALL / NOMAD / C/K SERIES TRUCK / 1/2 TON / 3/4 TON / 1 TON / C10 / C20 / C30 / 1500 / 2500 / 3500 / PONTIAC / GTO / BUICK / OLDSMOBILE / GMC / DEL RAY / DEL REY / T-BUCKET / DRAG CAR / DRAG PROJECT / SPEED BOAT / JET BOAT / V-DRIVE / MARINE Application / Or Any Street-Strip Rod/Machine, And Make A Statement When You Open The Hood, And (Or) Nail The Throttle! You Will Surely Enjoy For Years The Performance, Reliability & Awesome Sound This Crate Motor Will Make In Your Street/Strip Machine! This can also be used in place of 6 CYLINDER L6 SBC V6 V8 265 283 302 305 307 327 350 355 377 383 400 402 406 408 427 454 496 502 540 

MARK'S PERFORMANCE ENGINES: (623)388-2834

OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT

Cadillac teases Detroit 2013 concept at Pebble Beach

Tue, 21 Aug 2012

Cadillac teased a new concept car at the weekend at Pebble Beach to be unveiled in the steel at an unnamed American auto show early next year. We'll see you on the GM stand in Detroit then. During a press event Cadillac's Global Design Director Clay Dean said it was time for the brand to "reflect back not for nostalgia, but what made us great at the time." There were no further details about what we can expect from the concept but from what we can see from these renders is what appears to be a further move away from the geometry of the Art and Science form language towards a more sculptural surface treatment intersected by sharp, precise creases.

Interior Motives Design Awards 2008

Tue, 14 Oct 2008

The second press day of the Paris motor show once again coincided with the annual Interior Motives Design Awards, a competition open to student designers around the world and now in its sixth year. A jury made up of high-ranking design professionals, including the likes of VW's Flavio Manzoni and Faurecia's Andreas Wlasak, selected winners in the following 11 categories: Best Use of Ambient Lighting Best Innovation Best Production Interior Best Use of Technology Best Lifestyle Interior Best Safety Innovation Best Personalisation Best Eco Design Best Conceptual Interior Best Conceptual Exterior Best Xperience The title of 2008 Student Designer of the Year - and the grand prize of $5000 - went to the Royal College of Art's Pierre Sabas. His four-seater Free Form coupe concept took an inside-out approach to design, consisting of articulated, interlocking seat elements designed to eliminate the need for bulky, constrictive exterior crumple zones, and a sliding dashboard for adaptable ergonomics.

Pagani, Mercedes-AMG say V12s are separate

Thu, 18 Nov 2010

Italian sports-car maker Pagani and Mercedes-AMG, the high-performance division of Mercedes-Benz, on Thursday said that the engine for the future Pagani C9 supercar is not the same engine used in the Mercedes-Benz SL65 AMG Black Series roadster. The unusual announcement--automakers typically don't comment on future-product programs--refutes reports about the Pagani C9's engine. In January, Road and Track magazine reported that the V12 for the C9 was derived from the V12 in the SL65 Black Series.