Find or Sell any Parts for Your Vehicle in USA

Chevy 427 Ls3 Ls7 Ls6 Ls1 / 620 Horse Upgrade Crate Engine / Pro-built/ 408 New on 2040-parts.com

US $10,790.00
Location:

Wittmann, Arizona, United States

Wittmann, Arizona, United States
Condition:New Brand:Chevrolet Warranty:Yes

MARK'S PERFORMANCE ENGINES

*************************************

WORLDWIDE SHIPPING AVAILABLE

*************************************

** "BUY BEFORE END OF AUCTION" SALE!!! (HURRY!!!  BEFORE AUCTION ENDS...SEE DETAILS BELOW)!!! 

NEW CHEVY 427 (7.0L) LS3 LS6 LS7 LS1 LS2 L92 / 620 HORSEPOWER STREET / STRIPUPGRADE FUEL-INJECTED CRATE MOTOR!!

620 HORSEPOWER - 536 FT/LBS OF TORQUE

PROCOMP CNC PORTED ALUMINUM LS3 HEADS (THESE ARE THE SAME AWESOME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST.  SEE DETAILS BELOW)!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!!

2 YEAR / UNLIMITED MILE WRITTEN WARRANTY!!!

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

*21-25 MILES PER GALLON FUEL ECONOMY!!!

(*RESULTING FUEL ECONOMY DEPENDS ON MULTIPLE FACTORS LIKE VEHICLE WEIGHT, TRANSMISSION TYPE & GEARING, REAREND GEAR RATIO, REAR TIRE HEIGHT, AERODYNAMICS, AND DRIVING HABITS)

 **********************************

MASSIVE PRICE DROP (COMPARED TO OUR NON-EBAY PRICE)!

REGULAR NON EBAY PRICE : $12,790

FUTURE PRICE ON THESE WILL GO UP!

**********************************

CHEVY LS 427 STROKER 620 HORSEPOWER UPGRADE MOTOR FOR ONLY $10,790...WOW!!!

AWESOME & STREETABLE UPGRADE FOR ANY CHEVY LS / LSx POWERED GEN III OR GEN IV CAMARO, CORVETTE, CTS-V, ESCALADE, SILVERADO / SIERRA, AVALANCHE, SSR, GTO, G8, PICKUP, TAHOE / YUKON, DENALI, SUBURBAN, TRAILBLAZER, IMPALA SS, MONTE CARLO SS,  OR ANY LS-POWERED VEHICLE!!!

4.070" BORE  X  4.100" STROKE = 427 CID

THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT

*** SUPER STRONG IRON 6.0L BLOCK (MUCH STRONGER THAN ALUMINUM & ONLY 70 LBS. HEAVIER)!!! ***

EASY / NO HASSLE INSTALL...INTO YOUR FUEL-INJECTED CHEVROLET GEN III & GEN IV STREET / STRIP VEHICLE!!!

WAKE UP & UPGRADE YOUR STREET/STRIP CAR/TRUCK WITH THIS BRUTAL YET TOTALLY STREETABLE CRATE MOTOR!!!

AWESOME CHEVY MODERN LS / LSx TECHNOLOGY...

**PROCOMP CNC PORTED ALUMINUM LS3 HEADS (THESE ARE THE SAME AWESOME CYLINDER HEADS USED IN THE HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST.  SEE DETAILS BELOW)!! 

**6 BOLT MAINS (INCREDIBLE STRENGTH)!!!

**LS MOTORS DON'T LEAK & ARE SUPER DEPENDABLE!!!

THE SOUND OF HORSEPOWER AS SOON AS YOU TURN THE KEY!  THE RUMBLE SENT THROUGH THE EARTH, AND COMING OUT THE PIPES WILL THRILL YOU!!!

 POWER & SOUND OF A SERIOUS BIG BLOCK AT A SMALL BLOCK PRICE!!!  LIGHTWEIGHT YET HEAVY HITTING LSPACKAGE!!! 

*** THERE'S NO REPLACEMENT FOR CUBIC INCH DISPLACEMENT (427 CUBIC INCHES OF HARD HITTING CHEVY FUEL INJECTED LS / LSx POWER)!!! ***

PROCOMP LS3 ALUMINUM RECTANGULAR PORT CYLINDER HEADS WITH BIG 279 CC INTAKE RUNNERS!!!

2 YEAR / UNLIMITED MILE WRITTEN WARRANTY!!!

 MARK'S PERFORMANCE ENGINES LS 427 Cubic Inch FUEL INJECTED Engine designed to UPGRADE your 1998 through 2012 Gen III or Gen IV engine with our 620 HORSEPOWER-536 FT/LBS OF TORQUE 427 CUBIC INCH POWERHOUSE!  This engine is specifically designed to replace your existing LS engine.  Assembled with a GM 6.0L block and GM PERFORMANCE PARTS LS3 GEN IV heads, along with our FORGED crank, rods and pistons.  This CRATE ENGINE includes a performance hydraulic roller cam and lifters, and LS3 roller rockers.  This CRATE ENGINE is built with a 58x GEN IV style reluctor (24x GEN III reluctor available), and therefore uses 58x GEN IV style sensors (or 24x GEN III style sensors), and is a drop in for GEN II & IV applications, and by using our conversion kit you can also EASILY install into earlier GEN III applications (sold separately).  Also included is a FREE retune of your ECM, (requires sending your ECM to MARK'S PERFORMANCE ENGINES)!!!  We recommend 91 octane or better.  Engine includes GM PERFORMANCE PARTS LS3 Intake Manifold, Timing Cover, Valley Cover and Rear Cover.  Not included are injectors, rails, throttle body, coil packs, valve covers, front-drive accessories/brackets/pulleys, water pump, or oil pan.  IN MANY CASES YOUR ORIGINAL EXTERNAL PARTS CAN BE USED!!!

RACE TEC / JE FORGED HP PISTONS!!!

COMP CAMS HYDRAULIC ROLLER "LSR" HP CAMSHAFT

BALANCED & BLUEPRINTED (NO PRODUCTION LINE)

**"BUY BEFORE END OF AUCTION SALE" (DO "BUY IT NOW" BEFORE END OF AUCTION (ONLY $10,790 TOTAL PRICE) & GET FREE SHIPPING (WITHIN CONTINENTAL USA)!!! 

REGULAR NON EBAY PRICE : $12,790

WOW!!!!

CALL WITH ANY QUESTIONS & FOR CUSTOMER SERVICE!!

MARK'S PERFORMANCE ENGINES

(623)388-2834

WHY SETTLE FOR AN OLD-FASHIONED & LITTLE SBC 350 OR 383 WHEN YOU CAN HAVE 427 CUBIC INCHES OF MODERN FUEL INJECTED LS POWER???!!!

REGULAR NON EBAY PRICE: $12,790!!!!!!

ALL NEW / NEVER INSTALLED IN A VEHICLE!

 

CALL MARK'S PERFORMANCE ENGINES: (623)388-2834 
OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT  
 

CALL US NOW FOR DETAILS!!

@@@@  ALL NEW / PRO-BUILT / MACHINED / ASSEMBLED IN A STATE-OF-THE-ART FACILITY............NO HOME-BUILT JUNK!!!  @@@@


HORSEPOWER: 620 @ 6500 RPM, TORQUE: 536 FT./LBS @ 5500 RPM. (VERY STREETABLE / PUMP GAS FRIENDLY!)  

AWESOME PERFORMANCE & MUSCLECAR LOPE/IDLE YET VERY STREETABLE & DEPENDABLE!

CAN BE USED WITH A DAILY DRIVEN PUMP GAS CAR/TRUCK, DRAG CAR, MARINE AND OTHER APPLICATIONS!

BLOCK: CHEVY LS 6.0L GEN III 

HEADSNEW PROCOMP CNC-PORTED LS3 HP ALUMINUM WITH BIG 279 CC INTAKE RUNNER CYLINDER HEADS (WITH ALL NEW HP BIG 2.20"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides, 68 CC COMBUSTION CHAMBERS).  NOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS....CHECK OUT THE AWESOME FLOW NUMBERS BELOW!!  (THESE ARE THE SAME CYLINDER HEADS USED IN HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST)!!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!!

CRANKSHAFT: NEW EAGLE 4.100 STROKE LARGE RADIUS FORGED  

CONNECTING RODSNEW SCAT 6.125" 4340 FORGED W/ ARP HP 12-POINT CAP SCREW ROD BOLTS

PISTONS: NEW RACE-TEC/JE FORGED HP Pistons (Compression Ratio: 11.0:1....PUMP GAS FRIENDLY)  

MACHINE WORK:
Oven Baked / Shottabrated / Jet Washed & Magnifluxed (Completely Cleaned & Checked For Cracks)
Cylinders Bored (WITH TORQUE PLATE) & Finished Computer Honed To Within .0001'' Straightness & Roundness
Align Honed Main Bearing Bores/Saddles
Square Decked Parallel To Crankshaft
Re-Size Connecting Rods With New Quality ARP HP 180,000 Rod Bolts Installed
Balanced & Blueprinted
PROFESSIONALLY Assembled


ALL NEW PARTS:

  1. PROCOMP CNC-PORTED LS3 HP ALUMINUM WITH BIG 270 CC INTAKE RUNNER CYLINDER HEADS (WITH ALL NEW HP BIG 2.20"I/1.60"E STAINLESS STEEL SWIRL POLISHED UNDERCUT VALVES, HP Valve Springs, Chromemoly Retainers, 10 Degree Locks, Bronze Guides, 68 CC COMBUSTION CHAMBERS).  NOT YOUR GRANDMA'S STOCK "HIGH PERFORMANCE" HEADS....CHECK OUT THE AWESOME FLOW NUMBERS BELOW!!  (THESE ARE THE SAME CYLINDER HEADS USED IN HOT ROD MAGAZINE FEBRUARY 2011 RECTANGULAR PORT HEAD TEST)!!!  THESE ARE DEDICATED CASTINGS...FAR SUPERIOR TO OEM DESIGNS!!!
  2. EAGLE 4.100 STROKE LARGE RADIUS FORGED CRANKSHAFT
  3. RACE-TEC/JE FORGED HP Pistons (Compression Ratio: 11.0:1....PUMP GAS FRIENDLY)!
  4. SCAT 6.125" 4340 FORGED  CONNECTING RODS W/ ARP HP 12-POINT CAP SCREW ROD BOLTS
  5. COMP CAMS BIG HYDRAULIC ROLLER HP "LSR" CAMSHAFT (#54-470-11)(ADVERTISED DURATION: 285I / 301E; DURATION @ .050": 235I / 251E; LIFT: .624"I / .624"E; LOBE SEPERATION: 113)(AWESOME MUSCLECAR LOPE YET STREETABLE)!  
  6. TOTAL SEAL HP Piston Rings (BEST RINGS ON THE PLANET)! 
  7. Clevite CL-77 Rod/Main/Cam Bearings 
  8. Cloyes True Roller HP Timing Set
  9. ARP Connecting Rod Bolts (180,000 p.s.i) 
  10. GM PERFORMANCE PARTS LS3 FUEL INJECTION HP Intake Manifold
  11. GM PERFORMANCE PARTS LS3 Rocker Arms 
  12. FEL-PRO / ENGINE PRO Gasket Set
  13. GM PERFORMANCE PARTS HV Oil Pump
  14. Elgin Pushrods 
  15. GM Head Bolts
  16. Fasteners (Intake Manifold, Valve Covers, Oil Pan)
  17. GM PERFORMANCE PARTS SERPENTINE FRONT-DRIVE ACCESSORY/BRACKET/PULLEY KIT (150 AMP Alternator & Bracket, PS Steering Pump & Bracket, V7 AC Compressor & Bracket, Idler/Tensioner, Alternator/Water Pump/PS Steering Belt, AC Belt (OPTIONAL: ADD $990).

CHECK OUT THE FLOW #'S BELOW OF THESE AWESOME PROCOMP CNC PORTED LS3 ALUMINUM CYLINDER HEADS!  THESE TRULY ARE THE MOST BANG-FOR-THE-BUCK VALUE IN CHEVY LS CYLINDER HEADS!  

Cylinder Head Flow Numbers

Intake Flow

Exhaust Flow

.100
.200
.300
.400
.500
.600
.700

71.5
158.7
229.8
290.6
327.3
359.5
377.0

 .100
 .200
 .300
 .400
 .500
 .600
 .700

 59.1
 123.2
 174.1
 218.4
 240.4
 252.5
 260.6

 
Install This AWESOME Crate Motor In Your LSx / LS1 / LS2 / LS3 / LS6 / Z06 / LQ4 / LQ9 / L92 / CHEVROLET/ GMC / CAMARO / NOVA / VEGA / EL CAMINO / CHEVELLE / MALIBU / CORVETTE / CHEVY II / IMPALA / VEGA / BISCAYNE / BEL-AIR / STATION WAGON / PICKUP / TRUCK / SILVERADO / SCOTTSDALE / CHEYENNE / SUBURBAN / CARRY-ALL / NOMAD / C/K SERIES TRUCK / 1/2 TON / 3/4 TON / 1 TON / C10 / C20 / C30 / 1500 / 2500 / 3500 / PONTIAC / GTO / BUICK / OLDSMOBILE / GMC / DEL RAY / DEL REY / T-BUCKET / DRAG CAR / DRAG PROJECT / SPEED BOAT / JET BOAT / V-DRIVE / MARINE Application / Or Any Street-Strip Rod/Machine, And Make A Statement When You Open The Hood, And (Or) Nail The Throttle! You Will Surely Enjoy For Years The Performance, Reliability & Awesome Sound This Crate Motor Will Make In Your Street/Strip Machine! This can also be used in place of 6 CYLINDER L6 SBC V6 V8 265 283 302 305 307 327 350 355 377 383 400 402 406 408 427 454 496 502 540 
 
MARK'S PERFORMANCE ENGINES: (623)388-2834
OPEN 8AM-6PM MST M-F , 8AM-4PM MST SAT

McLaren MP4-12C vs Ferrari 458 Italia: the video

Thu, 26 Aug 2010

McLaren vs Ferrari: F1's nastiest rivalry is spilling onto the road, and the new issue of CAR Magazine delivers the world's first deep dive comparing Woking's 12C with Maranello's sensational 458. It's the most anticipated supercar showdown for almost two decades, and it's only in CAR magazine (out 18 August). We've stripped the McLaren bare, to deliver a 15-page technical lowdown on the 12C.

Remaking the Ford Mustang

Thu, 23 Aug 2012

By the time the next-generation Ford Mustang debuts in 2014, it will have worn a decidedly retro look for nearly a decade. From the styling to the chassis to the raw power, the pony car remains a throwback and a simple, true American pleasure. Expect that mantra to continue, but the execution will evolve, moving the Mustang forward into a broader, potentially global audience as it nears a half century of performance.

Citroen DS3 Cabrio DStyle by Benefit is the latest DS 3 Special Edition – costs £18,745

Fri, 01 Aug 2014

The Citroen DS3 Cabrio DStyle by Benefit We have to assume that Citroen see the DS3 Cabrio as a proper ‘Girly’ car as they’ve teamed up with Benefit Cosmetics to create a Special edition DS3 Cabrio inspired by their Stay Flawless Primer - the Citroen DS3 Cabrio DStyle by Benefit. With that in mind, you won’t be shocked to learn that the DS3 Cabrio by Benefit is all about the looks, and there’s nothing new going on under the skin, just the VT1 120 1.6 litre petrol engine with a five-speed manual gearbox good for 0-62mph in 9.9 seconds. Those tweaks to the looks of the DS3 Cabrio include a Polar White paint job with a black fabric folding roof and Fuchsia Pink for the door mirrors and alloy centres, with Benefit’s ‘Gabbi’s Head’ logo on the B-Pillars and on a Fuchsia Pink badge at the back.