Clutch Basket 2005 Yamaha Yz250f Yz 250f Outer Gear Wr250f 02-07 Oem on 2040-parts.com
Washington, Utah, US
This auction is for a clutch basket in good condition.
This item was removed from a functioning 2005 Yamaha YZ250F and was tested completely prior to removal. It may fit many other years and models so check with your local dealer before purchasing for fitment questions.
This item functions perfectly. It is ready to install and put to use. It has almost no wear as you can see in the images. Only very minimal grooves where the clutch plates contact the basket. This part may fit the following vehicles. It is the buyer's responsibility to verify compatibility with your local dealer.
2002 YZ250F
2002 WR250F
2003 YZ250F
2003 WR250F
2004 YZ250F
2004 WR250F
2005 YZ250F
2005 WR250F
2006 YZ250F
2006 WR250F
2007 YZ250F
2007 WR250F
2008 WR250F
2009 WR250F
We are parting out the complete bike. Visit our Ebay Store to view the other parts from this bike. Yes, we do combine shipping. See our policies below.
US Customers - Upgrade to Priority Shipping for ONLY $3.50
We stand behind our parts 100%.
We are committed to providing you a good usable part. If you are not satisfied for any reason, please contact us immediately and we will strive to make it right. We do not sell junk parts and discard anything that we wouldn’t put on our own bikes. However, we are human and can make mistakes so please contact us if there is any problem with the part that is not shown in images or mentioned in the description and we will strive to make it right.
We ask in return that a 5 star feedback rating be awarded once you are satisfied.
***Please take a moment to read our policies before buying***
Part Condition: We strive to provide images and a description that fully identifies any wear or damage to the part. We do not sell parts that are unusable. We test each bike before parting it out to identify any problems with components before they go up for sale. You will receive exactly what you see in the images unless otherwise noted in the description. If you don’t see an item in the images then it is not included in the auction.
Part Compatibility: Most parts will fit a wide range of models. We only guarantee it will fit the make model and year of the bike the part was pulled from. In some cases we do provide other models that the part may fit based on dealer data, but we do not guarantee fitment with these models. Please contact your local dealer to verify fitment prior to purchasing.
Shipping: Parts are shipped out within 24 hours of receiving payment, unless payment is received on the weekend in which case the item will be shipped out on the following Monday.
Expedited Shipping: If you require expedited shipping, please contact us prior to purchasing the part to be sure we can meet your needs. We use FedEx or USPS Express mail and can help verify that you will get your part as expected.
Combined Shipping: We do offer combined shipping discounts. If you purchase several parts at the same time, contact us before paying for the items and we will provide you with a single invoice for all the parts including shipping. Please do not ask for combined shipping estimates prior to purchasing the parts. We will only charge you what it costs us to ship the combined items.
International shipping: You are responsible to pay your country’s customs fees, import duties, taxes, etc. These fees will not appear in the listing and will be charged to you by your country’s customs office. USPS priority mail is usually the best value for international shipping. International shipping can be very expensive for heavy items so please enter your location into the shipping calculator and consider the shipping charges before buying. We do not mark merchandise values below value or mark items as “gifts” so please do not ask us to falsify shipping documents.
Utah State Sales Tax: We are located in Utah; therefore, buyers located in Utah are required by law to pay Utah state sales tax. This tax will automatically be added on to your invoice if applicable.
FEEDBACK: We will leave high feedback once payment is received. WE WORK HARD TO DESERVE A 5-STAR RATING FROM YOU. If you feel like you cannot leave a 5-star rating, please contact us first and we will strive to make it right. It is a waste of your time to open a complaint with ebay or paypal prior to contacting us because we are committed to resolving your concern whether you open a complaint or not.
RETURNS: Returns are accepted within 14 days of purchase. The buyer is responsible for return shipping. There is a restocking fee for all returns. This fee will equal the cost of the original shipping plus any additional Ebay or Paypal fees Cannibal Cycle incurred as a result of the order. When the return is a result of our error, there is no restocking fee. There are no returns on electronic items because electrical problems elsewhere in your bike can damage components that are placed in the system. We test run our bikes before parting them out to ensure everything is in good working order.
On Oct-01-13 at 13:49:57 PDT, seller added the following information:
Components for Sale
Cylinder 2003 honda crf450r crf 450r jug 96mm oem(US $204.99)
Clutch actuator 2000 suzuki rm250 rm 250 pusher lever arm 96-00 oem(US $19.99)
Engine oil line set frame 2005 yamaha yz250f yz 250f hoses tubes wr250f 04 05(US $21.99)
Msr rear shock seal kit for husqvarnavarna cr sm tc te wr 01-04(US $42.09)
Vertex piston repl piston ring kit 71.95mm for ktm 300 exc 04-12 300 xc/-w 08-12(US $31.65)
Carburetor 2005 yamaha yz250f yz 250f carburator carb 37mm oem(US $227.99)
McLaren P1 bare carbon fibre option
Tue, 11 Jun 2013McLaren are considering a full bare carbon fibre option for the P1 (pictured) With the McLaren P1 now getting close to hitting the road as a customer car (and arriving at Goodwood on the move in July), the lucky few with pockets deep enough to buy a car that will cost them pushing on £1 million are busy poring over the options for the P1. We spoke to one such customer over the weekend who was busy deciding which boxes to tick on the P1 spec sheet, and he was under the impression that McLaren were offering a full bare carbon fibre option for the P1, and at no cost. Which didn’t sound right.
Peugeot 2008 Crossover already selling well in UK – and half are White
Thu, 18 Jul 2013More than half of UK sales of the new Peugeot 2008 (pictured) are white cars The Peugeot 2008 – the crossover/SUV take on the new 208 – arrived in production guise at the Geneva Motor Show in March and looked a properly credible effort from the beleaguered French car maker. In fact, when Peugeot announced prices for the 2008 and their UK target sales of 8,000 a year, we thought they were being conservative with their projections, especially as the 2008 starts at a very reasonable £13k. That soon proved to be right when Peugeot announced it was having to double production of the 2008 as sales were much stronger across Europe than they’d anticipated, and it seems the same is happening in the UK.
Koenigsegg One:1 (2014) first official pictures
Fri, 28 Feb 2014By Ollie Kew First Official Pictures 28 February 2014 14:00 Stand well back. This is the Koengisegg One:1, and it may well need a team of lion-tamers to restrain it from leaping clean off its Geneva motor show stand and picking a fight with the McLaren P1, LaFerrari and Porsche 918. You’re looking at, according to Koenigsegg, the new fastest road car in the world.