Find or Sell any Parts for Your Vehicle in USA

Coats 950 Balancer & 5060a Tire Changer With Warranty on 2040-parts.com

US $4,498.00
Location:

Hamersville, Ohio, US

Hamersville, Ohio, US
:





 
COATS MODEL 5060-A
TIRE CHANGER

&

COATS MODEL 950 / 1000
TIRE BALANCER



COATS  5060A
 RIM CLAMP TIRE CHANGER

Built to Make Changing Low Profiles, Run flats, and other Tough Tires Fast and Easy

 

All Machines Come With A Buyer’s Protection 1 Year Parts Warranty

 With Full Technical Support

 

What Makes Us Different Is Our Process

Our Machines Are More Than A Quick Paint Job

True Rebuilds Require The Following

  • Completely Rebuilt By Factory Trained Technicians with previous Coats Service Partner experience
  • Each machine is completely disassembled down to the frame.
  • Each Frame is stripped, primed and repainted with original factory paint.
  • Swing Arm to Column Bushings are replaced.
  •  Transmission Disassembled (See Pictures)
  • All components cleaned - NEW Seals - O rings - Bearings are replaced.
  • Gears are checked and replaced as needed to meet original factory specs.
  •  Case refilled with NEW oil and checked for proper operation.
  •  All E and EX Models come with NEW Turntable Drive Motor - Wiring Harness - Forward Reverse Switch.
  • All Air Motors are disassembled - Cleaned - NEW Vanes - Bearings - Seals replaced and repainted.
  • One-way Flow Valves Reassembled - Torque and PSI settings tested to original factory specs.
  • NEW 4-way Valves replaced to provide function of the Table Rotation - Bead Breaker System - Table Clamp    Movement.
  • Table disassembled - all moving parts readjusted and lubricated. We reset Carriers and Jaws.
  • Table - Bead Breaker - B/L Cylinder are cleaned and repainted. Plungers and Seals replaced.
  • Replace Cylinder Sleeve as needed. We reassemble and test to factory PSI settings.
  • Replaced with all NEW - Hoses - Hard Lines – Bolts -  Bead Breaker Button - Actuator Valve - Machine Oil -Regulator - Tire Inflator Whip Hose - Bottle and Brush.
  • Table clamps are to Factory Specs.
  • NEW Removable plastic covers for protecting Rims on each clamp.
  • Gauges tested and replaced with new as needed.
  • Pressure Limiter Assembly disassembled and all O Rings and Diaphragms Replaced.
  • Pedal Assembly disassembled, cleaned, checked for wear and adjusted and repainted.
  • After the Tire Changer has been reassembled it is tested thoroughly by changing tires multiple times to ensure proper functioning.
  • All factory labels are replaced with brand NEW Labels
  • Complete PDF copies of the Operator and Spare Parts manuals come with each machine
  • The machine is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
  • All Tire Changers come with buyers protection 1 Year Parts Warranty with full technical support

 

Specifications:

Rim Diameter

 10" - 17.5" External; 13" - 20" Internal

Rim Width

14" Maximum

Tire Diameter

50" Maximum

Drive System

Air

Air Source (Air)

150 to 175 PSI, 5 HP compressor, 14 to 15 SCFM @ 150 PSI

Chassis Footprint

35"W x 44"D x 75"H

Shipping Weight

700 lbs.


Current Dealer Pricing: $5899.00
BUY NOW:
$2499.00

 

Coats 950 / 1000
Wheel Balancer

 

A High Volume Solution

The Model 950 wheel balancer is recognized as the workhorse of the wheel service industry.


What Makes Us Different Is Our Process

 Our Machines Are More Than A Quick Paint Job

True Rebuilds Require The Following

 

·        Balancer is completely disassembled down to the Frame.

·        Frame is stripped, primed and repainted with original factory paint.

·        Direct Drive Motor is disassembled and cleaned thoroughly and then repainted and tested.

·        Encoder is checked for proper function and replaced with NEW ones if needed.

·        Cooling Fan is cleaned and tested.

·        PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings.

·        Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel.

·        Motor Control Boards tested with Diagnostic Equipment.

·        Limit Switches are tested and replaced with NEW ones if needed.

·        ALL  Plastic Trim – Hood – Tray – Shroud on Motor – Cone Holder – Screen Holder are cleaned and refinished.

·        Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.

·        Each hub is cleaned and relubricated.

·        After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and  the overall performance of the Balancer is ready for service.

·        All Factory Labels are replaced with Brand NEW Labels

·        Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.

·        The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.

 

Balancers Come With a Buyer’s Protection Warranty

1 Year On Drive Motor and 90 Days On Remaining Major Components

With Full Technical Support


 

Key Features:

  • 1 1/2 horsepower direct-drive motor and 16-bit microprocessor provide super-fast five second cycle times.
  • Eight separate balancing modes (static and dynamic modes, RV and four different alloy modes, plus match mount).
  • Convenient keypad entry.
  • Keyboard activated "hood start" saves time.
  • Ounce/gram conversion and a roundoff feature eliminates complicated calculations.
  • 25-pocket weight tray provides abundant storage.
  • Self calibration.


Specifications:

Balancing Modes
5
Tire Diameter Up to 40"
Rim Width 2" to 19.9"
Max. Tire Wt. 150 lbs.
Shaft Diameter 1-1/8" or 40mm
Shaft Length 6-5/8"
Resolution: Oz. 0.01
Resolution: Degrees 1.4
Accuracy: Oz. 0.01
Power Requirement 220v AC, 1-3 Phase
Footprint 57"W x 50"D
Shipping Weight 586 lbs.


NEW CURRENT DEALER PRICING - $4505.43

BUY NOW ONLY - $2499.00



Rebuild Service Available
for your Coats, Corghi, or John Bean Tire Equipment
(Please visit our store for more information)

Trade in your tire equipment for one of our completely rebuilt units...
We also purchase used tire equipment
We are the largest tire equipment rebuilder in the US
 
email or call for more detailed information


CALL FOR DISCOUNTS ON PURCHASES OF MULTIPLE MACHINES
 
--  $199.00 Shipping  --

Shipping Cost
for these items are to most locations in the US and Canada


Certain remote locations may require additional cost

Shipping costs includes delivery of your order to a business address 
with a dock or other way to load or unload truck 

Liftgate, Residential, and Limited Access Delivery require additional costs if needed for shipment.

 


ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED

CALL FOR PROCESSING


eMail  with any questions you may have or
CALL (937) - 379 - 0200
9 am - 5 pm Eastern Time  Monday - Friday

Yes we ship International
Additional shipping cost applies - Call for Quote


Please visit our store for more tire maintenance equipment

     Building Trust in Transactions (tm)
Building Trust in Transactions (tm)

Click here to add us to your eBay favorites list.

Seller reserves the right to withdraw item from auction at anytime due to prior sale.

Silverstone To Celebrate Hosting 50 F1 Races In Style

Thu, 03 Jul 2014

THE famous Silverstone Circuit is gearing up to celebrate its 50th Grand Prix race this weekend, and it’s a milestone that will be celebrated not once, but twice during July. First, the golden anniversary will be marked by a parade of F1 cars over this coming British Grand Prix weekend. Then, three weeks later, the birthday party revs up when the Northamptonshire venue stages the annual Silverstone Classic (25-27 July).

Audi A8 facelifted for the 2013 Frankfurt Motor Show

Wed, 11 Sep 2013

Audi has facelifted the A8 range and is showing it for the first time here at the 2013 Frankfurt Motor Show. Honestly, it has: it is the facelifted car in our pictures. That even current owners may have to look twice says it all.

BMW i8 heading up the Goodwood Hillcimb in June

Fri, 21 Mar 2014

The BMW i8 is heading up the Goodwood Hillclimb The Honda NSX won’t be the only green supercar heading up the hillcimb at the Goodwood Festival of Speed in June – the new BMW i8 hybrid supercar will be too. BMW has announced that the i8 will be seen in action in the UK for the first time at the end of June when it too takes on the 1.16 mile Goodwood Hillcimb during the 2014 Festival of Speed. It’ll be the first time we get to see just how capable the i8 is, and even with a paltry 1.5 litre 3-cylinder engine it promises impressive performance as that little 3-pot churns out 228bhp oin its own and 356bhp when its electric motor joins in.