Please read the following text before you order. Thank you for your attention! If you have any questions after you receive the order (such as Defective item). Or if you have any questions about delivery (such as You did not receive the item). Please don't give me a Negative feedback or Neutral feedback, or Open a case. They are very bad for a Ebay seller. Please contact me first, I will help you solve the problem thorugh Return, Refund or Replacement. Thanks in advance!
- GPS type:
- GPS Tracker
- Item Size:
- 94mm*60mm*38mm
- Brand Name:
- OEM
- is_customized:
- Yes
- Voltage:
- 12-24V
- Model Name:
- GPS104B
Product DescriptionIntroduction This tracker GPS104B is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet.
Features * Waterproof shell * Built-in large capacity 6000MA battery, long standby time of 100 days. * Powerful magnets to absorb to vehicle firmly. * Real-time tracking, retrieve of lost vehicles, cargo. * Movement alarm, Geo-fence alarm, shock sensor alarm, remote monitoring. * Support map viewing on mobile phone screen, get absolute address by SMS, GPRS real time tracking on web based server. * Built-in high sensitivity GPS and GSM antenna to make it can be used alone without installation, convenient and quick. * Support for external GSM antenna, GPS antenna, and external power supply for the tracker to be installed on the device which can provide power for long-term using. Specifications Content | Specifications | DIM. | 94mm*60mm*38mm | Weight | 300g | Network | GSM/GPRS | Band | 850/900/1800/1900Mhz | GSM/GPRS Module | Simcom340z or Simcom300z | GPS Module | SIRF3 chip | GPS sensitivity | -159dBm | GPS Accuracy | 5m | GPS Start time | Cold status | 45s | Hot status | 1s | EXT. power | DC 12 V -24V | Operating Current | Sleep Current | 4mA±1mA | GSM operating Current | 54mA±3mA | GPRS Current (data transfer) | 60mA±5mA | Battery | 3.7V 6000mA/h Polymer battery | Charge current | 1.2A±0.2A | Charge time | 5h | Standby time | GSM sleep mode | 1500h | Storage Temp. | -40°C to +85°C | Operation Temp. | -20°C to +65°C | Humidity | 5%--95% non-condensing |
Hardware Description
Wiring diagram
Main Functions 1. Single Locating Tracking location, when no GPS signal, the SMS includes the last valid latitude & longitude as well as the LAC code of current position, the LAC code can be input in the column of “manual track” menu of web platform.
2. Auto track continuously a. Track with limited times upon time interval b. Track with unlimited times upon time interval c. Smart track upon time and distance interval
3. Automatic update positions of vehicle turns The tracker will update the positions automatically to web server once the vehicle changing driving direction over pre set angle value to form a smooth trajectory consistent with the actual road, this function is only effective in GPRS mode.
4. GPS drift suppression The GPS data stop updating if vehicle is not moving and latitude and longitude always keep same, and GPS data updates automatically when vehicle is moving.
5. Get absolute street address Note: You must set up the APN of your local GSM network for the SIM card in tracker first before using this function.
6. Location based service (LBS) When the tracker device doesn’t received valid GPS signals, tracker will locate by LBS, the messages includes the GPS coordinates of the last position in SMS mode, but the LAC in message is the current new position, the location can be seen by input the LAC code in the menu “Manual Track” of web platform ;gpstrackerxy, you can also send command “address+password” to tracker to get the newest absolute address and newest GPS coordinates as well; tracker will automatically switch to track by location based service in GPRS mode, and actualized on the map of web server with LBS mark. And there may be some inaccuracy with actual location by LBS tracking; the bias depends on GSM reception.
Note: This feature can be used normally in most areas according to the signal of GSM network. It may not be available in some areas.
7. Check the Vehicle State. 8. Check IMEI 9. Terminal (local) Time Setting
10. Monitor (Voice Surveillance) The default mode is “track” (Track mode). Send SMS “monitor+password” to the unit, and it will reply “monitor ok!” and switch to “monitor” mode.
11. Data Logging Logging Volume: Built-in flash 1MB (store about 16,000 positions); expanded volume depends on the SD card inserted.
12. Data Load 13. Forward the third parties’ message 14. Cut off the Oil and Power System a. Execute immediately Mode Send command “quickstop+password” to tracker, it will reply “quickstop OK”. Then tracker will stop the car immediately after “stop” command. Send command “stop+password” to tracker, tracker will execute it and reply “Stop engine Succeed”. And it will remain immobile state until next command to resume.
b.Execute depends on speed(Default mode) Send command “noquickstop+password” to tracker, It will reply “noquickstop OK”, Then the tracker won’t stop the car immediately after “stop” command during the speed above 20KM/H, instead, it will reply “it will be executed after speed less than 20KM/H”, and stop the car when the speed is less than 20KM/H.
15. Resume the Oil and Power System 16. Sleep Mode a. Sleep by time Send "sleep+password+space+time", tracker will reply "sleep time ok" if none of the alarms listed under chapter IV has been set and no operations, tracker will fall asleep in 5 minutes, LED will be off, calling or SMS can awake the tracker. If these alarms have been set, tracker will enter sleep by detecting shock sensor. And tracker will sleep by time as default.
b. Sleep by shock sensor Send "sleep+password+space+shock", tracker will reply "sleep shock ok", it will enter sleep mode after detect no shock, and LED will be off.
17. No sleep mode 18. Geo-fence 19. Multi-area management 20. Movement alert 21. Overspeed alert 22.Accident alarm (Optional)---If you need this function, you add extra $6 for it will be ok! When tracker detects accident occurred (severe impact), it will send " Accident! + latitude & longitude " to all authorized phone numbers.
23. Shock Sensor Alarm 24. SOS Alarm 25. Low battery alert 26. Power off alarm 27. GPS blind Spot alert 28. TCP/UDP switch 29. Configure parameters by USB Connect tracker to computer with the USB cable (option), and open file user_config.ini with notepad and operate it according to the examples. Note: Correct password is need every time you configure the tracker.
30. Less GPRS traffic Tracker will change to less GPRS traffic mode & sleep by shock sensor mode after parking 5 minutes, GPRS disconnect and connect again when alarm being triggered or start driving.
31. Setup monitor center number If monitor center number doesn’t setup, auto track messages will be sent to the cell phone which send this command. Web platform and PC installation tracking software: a. Web based platform gpstrackerxy Configuration IP: 202.104.150.75 Port: 9000. Please check "software platform user manual" included in the CD for detailed operation information.
b. PC based installation tracking software user manual included in the CD in package, it is free for using! How to track the device
1. Cell phone Link:
2. Check Position in Google Earth: 3. Free PC Real-time tracking software, which is for you to set up your own tracking platform:
4. Web tracking software and free PC tracking software:
NOTE: This is the web tracking software login page, if you want to experience it, you can login via this demo account: gpstrackerxy User: demo Password: 8888. It has 10 days trial time, but after trial time, you will need pay yearly fee for each device! if you need it, please order it via below link,Thanks Package Content 1. Genuine Box 2. GPS TRACKER GPS104 3. Lighter car adapter 4. GPS Antenna 3 meters 5. GSM Antenna 2 meters 6. Harness 4PIN 7. Waterproof bag 8. Book user manual 9. CD
|