Purchase Comp Cams 7.350" Hi-Tech GM LS1 LS2 LS6 -.050" Short Chroemoly Pushrods #7950-16 in Memphis, Tennessee, US, for US $128.89

Returns Accepted:Returns Accepted Item must be returned within:14 Days Refund will be given as:Money back or exchange (buyer's choice) Return shipping will be paid by:Buyer Return policy details: Restocking Fee:No Part Brand:COMP Cams Manufacturer Part Number:7950-16 Interchange Part Number:CCA-7950-16 Other Part Number:CC-7950-16 Warranty:Yes UPC:0-36584-42172-6

Brand New set of Sixteen (16) COMP Cams Hi-Tech Pushrods designed for General Motors Gen III LS1/LS2/LS6 V8 Engines. 5/16" Diameter, 7.350" Long (-.050" Length), .080" Wall, 5/16" precision formed and reinforced ball type ends. Part #7950-16.

Full Manufacturer's description under the pictures below

Product Representation: Actual parts may vary based on configuration ordered.

Manufacturer's Description:

The pushrod is one of the most important pieces of the valve train, but all too often it’s taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today’s all-out race engines demand the highest quality components at every step, and COMP Cams® Hi-Tech™ Pushrods fill that requirement.

Hi-Tech™ Pushrods feature a one-piece design from .080” wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.

One-piece construction from .080” wall, seamless chromemoly
Heat-treated for extended durability & guide plate compatibility
Precision formed & reinforced ends
Black-oxide finished with laser etched part number & length
Ideal for serious street performance & race applications

Shipping and Accounting Automation by Teapplix

2011 Jaguar XJ spied in the snow

Fri, 13 Mar 2009

Jaguars are fast and sleek, and few things in the animal kingdom--or the car world--can hang with them. But spy shooters apparently can. And today we have shots of what could be the new XJ.

SEAT Leon Cupra and Cupra 280 revealed

Wed, 08 Jan 2014

SEAT Leon Cupra and Cupra 280 revealed SEAT has come out fighting in the hot hatch stakes, and has revealed two versions of the Leon Cupra with up to 276bhp. Based on similar underpinnings to VW’s Golf GTI, the Leon goes much further than the GTI by offering a choice of two Cupra versions, 261bhp in the manual three-door SC or a mighty 276bhp in the Cupra 280. The 261bhp Cupra manages to get to 62mph in 5.9 seconds with the Cupra 280 cutting that to 5.7 seconds when fitted with DSG ‘box, with economy for the manual Cupras at 44.1mpg, and 42.2 mpg if you opt for the DSG ‘box.

Paolo Pininfarina elected Chairman at Pininfarina SpA

Thu, 14 Aug 2008

Paolo Pininfarina has been unanimously elected to become Chairman of the Board of Directors at Pininfarina S.p.A., one of the roles previously occupied by his late brother Andrea Pininfarina. The Board of Directors agreed to assign authority over the Group's design operations and Pininfarina Extra to Paolo Pininfarina and also elected to hand over the Group's communications to his sister Lorenza Pininfarina, the Provisional Deputy Chairperson. There has been much speculation about the company's future following the untimely death of CEO Andrea Pininfarina in a traffic accident last week.

Comp Cams 7.350" Hi-tech Gm Ls1 Ls2 Ls6 -.050" Short Chroemoly Pushrods #7950-16 on 2040-parts.com

Rocker Arms & Parts for Sale

2011 Jaguar XJ spied in the snow

SEAT Leon Cupra and Cupra 280 revealed

Paolo Pininfarina elected Chairman at Pininfarina SpA