Find or Sell any Parts for Your Vehicle in USA

Complete Running Engine! Honda 300ex Trx300ex Trx 93-06 Trx250x 250x Motor Head on 2040-parts.com

US $595.00
Location:

Fort Myers, Florida, US

Fort Myers, Florida, US
Item must be returned within:14 Days Refund will be given as:Money Back Return shipping will be paid by:Buyer Return policy details:25% restocking fee on returns. If the item offered free shipping, the shipping costs that were incurred to send the item to the buyer will be deducted from the refund amount. Returns will not be accept if you bought the item for a machine(make, model, and year) other than what's listed in the description. Unless otherwise stated, no parts are included besides what is listed in the description, or shown in the pictures. We do not deserve bad feedback because you assumed a part was included. We will also NOT provide refunded for this reason. We never guarantee the condition of things like bearings, seals, gaskets, bushings, hardware, You should expect any parts purchased from Prestige Motosports to be flawed, as they are all used. If you have questions about an item, they need to be asked BEFORE purchasing, not after. We never guarantee that tires hold air. We never guarantee that all parts are perfectly straight. All items sold as is without warranty, refunds or exchanges. Please be sure to review the posted pictures, terms and conditions at the bottom of the page before buying. Carburetors are never guarantee to not leak, or run with your bike. You should install a new needle valve in any used carb before using. All parts are purchased in "as is" condition. Returns Accepted:Returns Accepted Restocking Fee:No

The above referenced item is from a 1999 Honda 300EX.  It should fit 93-06 300EX's, and possibly 87-92 250X models.  Don't take my word for it though, do your own research before buying.  We cannot guarantee that this will fit any machine besides the specific year/make/model listed above.

 

It's USED, so don't expect it to be perfect.  It worked well when it was on the quad.  The chain area is NOT damaged, unlike most 300ex engines.  It starts right up and runs strong.  No smoke, no chatter.  Clutch feels good.  Starter & Stator included!!  Bolt on and go! 


We Accept Credit Card order by Phone!  Call (941)244-7736 Monday-Friday 9:30am-5pm EST

Call for faster shipping!



 Check out my other auctions!  I'm parting out an entire Honda 300EX!  I will combine shipping if you win multiple auctions.  The Title of our listings contains "keywords".  Just because a keyword is listed there does not mean that we guarantee it will fit that year/make/model.  Please look at the first line of the description for the part name and year/make/model it came off of.  Do your own research before buying to make sure it will fit your bike.   We will not provide refunds for an item if you purchased it to fit on to a different year/make/model bike and it does not fit.  We also don't accept returns if you just "changed your mind" on an item.

 

Local Pickup is always welcome.  International buyers are welcome.  Thanks for looking!!!

 

Photobucket


You only get what's pictured.  No other parts are included, unless otherwise stated.  All parts are purchased in "as is" conditionNo warranty.  We never guarantee the condition of things like bearings, seals, gaskets, bushings, ball joints, hardware, etc.


250r trx250r lt250r drz400 rmz250 yfz450 z400 ltz400 trail blazer scrambler magnum raptor 660 700 350 blaster warrior tecate lt230 lt250 ranger trail boxx bandit 600 1200 boulevard c50 intruder 450r 400ex banshee vulcan cb650 cb750 prairie lakota 300ex 250x predator rmz450 crf450 foreman recon rincon yamaha honda kawasaki suzuki ktm harley davidson ducati

scramblertrailblazer

250r trx250r lt250r drz400 rmz250 yfz450 z400 ltz400 trail blazer scrambler magnum raptor 660 700 350 blaster warrior tecate lt230 lt250 ranger trail boxx bandit 600 1200 boulevard c50 intruder 450r 400ex banshee vulcan cb650 cb750 prairie lakota 300ex 250x predator

115772-500-010





115772-500-010

(replaces part #
15772-500-013)







216223-KA3-740





317210-HC0-010





417211-HC0-000





517212-965-000





617217-HC0-000





717219-HA2-405





717219-HA2-405

(replaces part #
17219-HC0-000)







817223-HB3-003





917225-HM3-L00





1017227-HC0-000





1117252-HC0-000





1217253-HM3-L00





1317254-HC0-680





1495018-60250

(replaces part #
17257-HA0-000)







1495018-60250

(replaces part #
17257-HA0-680)







1517257-HB5-000





1650190-HC0-000





1777206-MJ0-000





18
90101-HB5-000





1990107-HA0-680





2090501-438-000





2193500-05025-0G





2295701-06012-08





2395701-06028-08

Engines & Components for Sale

Alfa Romeo 4C on track with Giancarlo Fisichella (video)

Tue, 17 Sep 2013

Giancalrlo Fisichella takes the Alfa 4C round Balocco (pictured) The Alfa Romeo 4C – Alfa’s baby supercar – is due on sale next month following its UK dynamic debut at Goodwood, so to get a bit of adrenaline flowing in the veins of potential buyers, Fiat grabbed Ferrari test driver Giancarlo Fisichella and stuck him behind the wheel of the 4C to play at the Balocco test track, Fiat’s proving ground. And we have to say, the 4C doesn’t just look good, it sounds great and looks to be as light and nimble as expected. In many ways, the Alfa 4C is an Italian take on the Lotus Elise, but it manages to do it with a huge dose of Alfa flair, both in its design and its execution.

General Motors buys Suzuki's stake in Canadian assembly plant

Fri, 04 Dec 2009

General Motors and Suzuki Motor Corp. are ending their CAMI joint assembly operation in Canada, with Suzuki selling its 50 percent stake to GM in a move that severs another tie between the partners. Neither company disclosed the timing or pricing of the sale, which was announced Friday.

Autodesk Automotive Days - Munich 2009

Thu, 10 Dec 2009

Autodesk's Automotive Days design conferences, launched in Munich in 2008, have highlighted the key growth area of digital prototyping. And at last month's conference the focus was once again broadened to include coverage of conceptual design and creative visualization (at the very beginning of the design process) and design for manufacture - at the culmination of the process. Speakers from Autodesk outlined the innovative features of their latest product suites, while keynote presentations from leading automotive designers such as Frank Stephenson of McLaren and Volvo's Rickard Franklin showed in fascinating detail how the benefits of these software systems were being maximized in busy corporate design studios.