Connecting Rod Rods For Triumph Tr5 Tr250 Gt6 Tr6 Late Model Conrods Con Rod Max on 2040-parts.com
US $514.99
Location:
HK, Hong Kong
Condition:NewManufacturer Part Number:TR6 Connecting RodsNote:Re-bore engine is need for fit TR250/TR5Surface Finish:High Performance Aftermarket PartsBolts:With 12 ARP 2000 5/16 boltsWarranty:YesOther Part Number:Bielle Pleuel con rods for Triumph TR5 TR250 GT6Material:Forged 4340 aircraft chrome moly quality steelQuantity:6 Pieces as showing in pictureCenter to center length:146.05mmPin Type:Bronzed bushing floating pinBig end diameter:51.34mmBrand:MaXpeedingRods Performance partsSmall end diameter:20.63mmUPC:889811119206
Free US ShippingFast international shipping30 Days Return PolicySecure Shopping
Check Description
Please use the compatibility guide as a reference only. All the key information shows in the item description. Please read through all item information carefully as variants are very common.
BE SURE
Please double check all item information in the listing before the purchasing. For anything you concern, but not in the description, please consult our sales representative by eBay message
BUY WIHT CONFIDENCE
One determined this is the correct item for you, please select the quantity and click the “Buy It Now” button to place the order
MaXpeedingRods
MaXpeedingRods
Description
Specification Quantity: 6 Pieces a set Bolts: Including Genuine 5/16" ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts) Material: Forged 4340 aircraft chrome moly quality steel for racing Weight Tolerance: Balanced to +/- 1 gram in set
Application
for Triumph TR5 TR250 GT6 TR6 late model Conrods
Dimensions Center to center length: 146.05mm Big end diameter:51.34mm Small end diameter: 20.63mm Big end width: XX Small end width: XX
Note: Re-bore engine is need for fit TR250/TR5
FAQ
Shipping
Return
Warranty
Contact us
Feedback
What horsepower are your connecting rods rated to?
With ARP 2000 rod bolts, our conrods are good for 600-800 HP. If you need our conrods to hold over 800 HP, please upgrade to ARP L19 rod bolts with additional cost.
Can I use original pistons and rod bearings with these conrods?
Our conrods are high performance aftermarket replacement conrods. They are designed for floating pin pistons. And we recommend strongly you to use high performance rod bearings. All of our conrods fit for standard size rod bearings.
Why is it so important to choose the right bolts for the conrods?
If you do not plan to change a new engine, then be ware of the bolts you will use. The fake bolts will never last under 400HP or higher. And when it breaks, you will be more than regret of not choosing the right one. All our conrods are equipped with genuine ARP2000 or ARP L19 bolts for different projects. We care about your engine as much as you do. Just tell us what you need, and we will make everything right for you.
Why do we choose ARP rods bolts?
Rod bolt is unquestionably a very important fastener in the engine; they hold the key to the entire rotating assembly. It secure the connecting rod and bearing to the crankshaft. A weak rod bolt in a racing engine means catastrophic disaster and will put your life at risk. The weak rod bolts would broke when the engine run at high rpm, it will cause a instant failure of the race and the lost of an expensive engine. We only use and sell ARP rod bolts. As ARP is the world leader in the racing fastener. It is the priority choice in the high performance racing parts industry for its strong resistance under the high temperature and rpms. Racing professionals only use ARP bolts to ensure the strength and reliability of their engine. If you need ARP2000 or ARP L19 rod bolts please contact us.
What is the torque of the bolts setted?
The torque of 3/8" thread size ARP rod bolts is 48 foot pound. The torque of 5/16" thread size ARP rod bolts is 28 foot pound.The professional installation is strongly recommended.
US Domestic Shipping Notice - All items will be dispatched within 24hrs(Mon-Fri)
Our carrier collects all the parcels at 4:30am PDT, any payment paid after 5:00am PDT will be shipped the next day at 4:30am PDT.
If you paid
Item Shipped On
Est.Delivery Time
Before Apr. 1st at 4:30am
Apr. 1st at 5:00am
Apr. 5th - Apr. 7th
After Apr. 1st at 4:30am
Apr. 2nd at 5:00am
Apr. 6th - Apr. 8th
If our estimated delivery time and eBay’s are contradictory,please refer to the standard delivery time of ours.
Estimated Delivery Time
From
To
Service
Est.Delivery Time
US
US
UPS or Fedex Ground
3-5 Business days
Outside of US
DHL FedEx
4-7 Business days
Please provide the following shipping information for your order
Otherwise your shipment will be deferred. We are not responsible for any shipping lost caused by wrong shipping information
International Shipment
For international shipment, we do not cover any import taxes or duties. Import tax is charged by the government, not us. Our item price and shipping cost do not include any import tax which will be charged by the shipping company when you got the parcel. Please be noted that is not the extra shipping fee.
At MaXpeedingRods, we hope that you are happy with your purchases. We understand sometimes you may need to return or cancel your order. Before you return any item(s) , please read the following policy:
1. We are happy to offer 30 days returns policy to all our eBay customers.
2. Please contact us for the return procedure:
Please contact us for the returns shipping address - Do Not return the item(s) to the address which shows on the eBay invoice directly.
Please contact our sales representative to obtain a Return Authorization Number. You must print out the return label we provided and put on the packing box. - To get the Return Authorization Number, our sales representative may ask you to provide the video or picture to show the item condition of the item. Any returned item(s) without Return authorization number will be rejected.
3. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
4. The customer is responsible for all postage costs for products returned under our Returns Procedure unless this has been specifically agreed and confirmed in advance with our sales representative.
5. MaXpeedingRods will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.
6. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, we will keep you informed the update of results.
All MaXpeedingRods products have 12 months warranty (unless otherwise stated). In the very unlikely event that you have a problem with our product, please contact us via eBay messages.
Full details of warranty are as follows:
If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.
The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.
We encourage our customers to contact us with any eBay related enquiries by using the eBay messaging system. We aim to reply to all messages within 24 hours.
Our eBay team is available Monday - Friday between 6:00PM - 10:00AM (PDT) but are OFF on the weekends, so messages sent after business hours especially on Friday, will be answered the following Monday.
What horsepower are your connecting rods rated to?
With ARP 2000 rod bolts, our conrods are good for 600-800 HP. If you need our conrods to hold over 800 HP, please upgrade to ARP L19 rod bolts with additional cost.
Can I use original pistons and rod bearings with these conrods?
Our conrods are high performance aftermarket replacement conrods. They are designed for floating pin pistons. And we recommend strongly you to use high performance rod bearings. All of our conrods fit for standard size rod bearings.
Why is it so important to choose the right bolts for the conrods?
If you do not plan to change a new engine, then be ware of the bolts you will use. The fake bolts will never last under 400HP or higher. And when it breaks, you will be more than regret of not choosing the right one. All our conrods are equipped with genuine ARP2000 or ARP L19 bolts for different projects. We care about your engine as much as you do. Just tell us what you need, and we will make everything right for you.
Why do we choose ARP rods bolts?
Rod bolt is unquestionably a very important fastener in the engine; they hold the key to the entire rotating assembly. It secure the connecting rod and bearing to the crankshaft. A weak rod bolt in a racing engine means catastrophic disaster and will put your life at risk. The weak rod bolts would broke when the engine run at high rpm, it will cause a instant failure of the race and the lost of an expensive engine. We only use and sell ARP rod bolts. As ARP is the world leader in the racing fastener. It is the priority choice in the high performance racing parts industry for its strong resistance under the high temperature and rpms. Racing professionals only use ARP bolts to ensure the strength and reliability of their engine. If you need ARP2000 or ARP L19 rod bolts please contact us.
What is the torque of the bolts setted?
The torque of 3/8" thread size ARP rod bolts is 48 foot pound. The torque of 5/16" thread size ARP rod bolts is 28 foot pound.The professional installation is strongly recommended.
Description
Specification Quantity: 6 Pieces a set Bolts: Including Genuine 5/16" ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts) Material: Forged 4340 aircraft chrome moly quality steel for racing Weight Tolerance: Balanced to +/- 1 gram in set
Application
for Triumph TR5 TR250 GT6 TR6 late model Conrods
Dimensions Center to center length: 146.05mm Big end diameter:51.34mm Small end diameter: 20.63mm Big end width: XX Small end width: XX
Note: Re-bore engine is need for fit TR250/TR5
Shipping
US Domestic Shipping Notice - All items will be dispatched within 24hrs(Mon-Fri)
Our carrier collects all the parcels at 4:30am PDT, any payment paid after 5:00am PDT will be shipped the next day at 4:30am PDT.
If you paid
Item Shipped On
Est.Delivery Time
Before Apr. 1st at 4:30am
Apr. 1st at 5:00am
Apr. 5th - Apr. 7th
After Apr. 1st at 4:30am
Apr. 2nd at 5:00am
Apr. 6th - Apr. 8th
If our estimated delivery time and eBay’s are contradictory,please refer to the standard delivery time of ours.
Return
At MaXpeedingRods, we hope that you are happy with your purchases. We understand sometimes you may need to return or cancel your order. Before you return any item(s) , please read the following policy:
1. We are happy to offer 30 days returns policy to all our eBay customers.
2. Please contact us for the return procedure:
Please contact us for the returns shipping address - Do Not return the item(s) to the address which shows on the eBay invoice directly.
Please contact our sales representative to obtain a Return Authorization Number. You must print out the return label we provided and put on the packing box. - To get the Return Authorization Number, our sales representative may ask you to provide the video or picture to show the item condition of the item. Any returned item(s) without Return authorization number will be rejected.
3. Please return your item(s) in original packaging and ensure that all packages are securely wrapped.
4. The customer is responsible for all postage costs for products returned under our Returns Procedure unless this has been specifically agreed and confirmed in advance with our sales representative.
5. MaXpeedingRods will not accept responsibility for loss or damage of goods during transit, please ensure that the insurance cover option is taken where possible.
6. Upon receipt, all products will be inspected at our discretion in 3-5 business days. Then, we will keep you informed the update of results.
Warranty
All MaXpeedingRods products have 12 months warranty (unless otherwise stated). In the very unlikely event that you have a problem with our product, please contact us via eBay messages.
Full details of warranty are as follows:
If Goods become faulty during the period of the warranty for reasons unconnected with your acts, omissions or misuse of the Goods, you must notify us in writing and/or by completing a warranty claim form (including a description of the fault) and return such Goods to us. Such Goods shall be followed the return procedure and returned to the manufacturer for review, testing and examination, and the manufacturer will not arrange collection for the product. Based on the manufacturers' opinion, we will be afforded reasonable opportunity and facilities to investigate any claims made under the Warranty.
The above warranty is given by us subject to you having no liability in respect of any defect arising from wear and tear, willful damage, negligence, tampering of the Goods, incorrect fitting of the Goods by you and/or a third party, abnormal working conditions, failure to follow our and/or the Goods' manufacturers' instructions (whether oral or in writing), misuse or alteration or repair of the Goods without our approval.
Contact us
We encourage our customers to contact us with any eBay related enquiries by using the eBay messaging system. We aim to reply to all messages within 24 hours.
Our eBay team is available Monday - Friday between 6:00PM - 10:00AM (PDT) but are OFF on the weekends, so messages sent after business hours especially on Friday, will be answered the following Monday.
Automakers are seeking to head off an EPA ruling that would allow gasoline to contain 15 percent ethanol, up from 10 percent now, and they've won some bipartisan congressional support. The two main automaker industry lobbies have argued that the U.S. Department of Energy has done insufficient testing to assure that gasoline containing up to 15 percent ethanol won't harm vehicles.
Bernie Ecclestone says there will be no two-tier system in the F1 budget cap row
[ad#ad-1]
All eyes have gone off the stunning start to this year’s F1 circus with the news that Ferrari, Renault, Red Bull and several other teams have threatened to quit F1 next year in protest at the budget cap proposal and the two-tier system that appears to create. In a nutshell, the FIA – lead by Max Mosley – has imposed a £40 million cap on F1 team expenditure for next year (excluding driver costs, marketing costs and transport), but has said that teams who don’t adhere to the cap can still compete, but will be handicapped. Not surprisingly, the richer teams have objected and, on the face of it, it starts to look as if F1 as we know it is going to bite the dust.
Corrected: The key for Suzuki to sell more cars in the United States, apparently, is to go out of business. American Suzuki Motor Corp., the bankrupt U.S. distributor, got court permission to bring in 2,500 more cars for the U.S.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
What horsepower are your connecting rods rated to?
.jpg)
Callies u14135 6.000 ultra forged i-beam connecting rods, sbc(US $1,699.00)
K1 002ad25600 h-beam connecting rods amc 390 6.000 in. 2.1 in. sbc journal(US $666.04)
K1 002ad25600 h-beam connecting rods amc 401 6.000 in. 2.1 in. sbc journal(US $666.04)
K1 012ad25600st h-beam connecting rods chevy small block sbc 6.000 in. stroker(US $666.04)
K1 012ac25620 h-beam connecting rods chevy small block sbc 6.200 in. pin: .927 i(US $666.04)
K1 007ao32612 h-beam connecting rods chrysler small block 6.123 in. hemi(US $666.04)