Corvette 1958 1959 19601961 1962 Working Power Top Assembly on 2040-parts.com
New Haven, Indiana, United States
I have 1 complete working power top unit for 1958-1962. The important parts of the unit have been restored on the inside. The solenoid valves were taken apart and cleaned the valve seat's cut and new bullet needle's have been replaced. The original motor has been taken apart cleaned. The original hose set has been cleaned. The unit has 3 new cylinder's. All the switch's have been gone threw and connector joints soldered. Some of the metal brackets have been cleaned and other ones have not. The original motor mount has a split in the platform at each end, it has been bead blasted and primed but the splits need welded. The hard to find cover for the switch assembly beside the passenger seat has some rust issues at the bottom but can be repaired, and also the passenger side seat switch bracket also needs some repair ( see pictures ) This unit has a new Electric Limited wiring harness and the original dash switch has been checked. I have added most of the hardware to install the unit, and a new ground strap and wire to the starter solenoid, and a reproduction circuit breaker. Also included are many sheets of diagrams to show you where ever thing goes plus my personal instruction's on how to set all the switch's. I have run this unit many times on my test bench with all the switch's and the wiring harness all hooked up. The unit runs very nice. This unit would be nice for a non restored NCRS car or you could detail everything for show. I have been working on these unit's for over 20 years, I can also restore your power top unit. A flat fee of $65.00 shipping to the lower 48 sates. Any question contact me at 260-749-8201. thanks john
|
Other Parts for Sale
- Windshield washer hose "t" fitting--universal 1/8, 1/4, 3/8 snap-off connector(US $10.79)
- 1963 ford galaxie 500 parts 63 390 v8(US $750.00)
- 1932 ford vintique brand passenger & pickup running board brace set(US $30.99)
- 1955-1956 chevrolet water pump fan pulley
- Mercedes 190sl tool kit---complete, original, great shape with inbus, wood felo(US $1,984.00)
- Vintage mopar fog/spotlight hotrod/ratrod(US $12.00)
Citroen Tubik Concept – it’s a Citroen H Van MPV
Sun, 04 Sep 2011Citroen Tubik Concept - Frankfurt-bound The Citroen Tubik is a slightly bonkers concept from Citroen that’s heading to the Frankfurt Motor Show in a week or so. But it does have possibilities as a production car. Looking like a modern take on a Citroen H Van (the cheap and cheerful, do anything, post-war lugging machine) the Tubik is Citroen’s idea of what a high-tech executive shuttle should be.
Rumour: Aston Martin One-77 gets canned – or does it?
Tue, 17 Feb 2009Aston Martin is really struggling at the moment. Discounts abound (particularly on ’08 model year cars – you can have a V8 Vantage Roadster for not much over £60k, and a DB9 for £75k), and new car sales are as rare as hens teeth. Not surprisingly, there have been deep job cuts, and the dealer network is really struggling to survive.
Exclusive: Koenigsegg cuts production numbers on the CCX & CCXR Edition
Thu, 19 Mar 2009The Koenigsegg CCXR Edition - Now just 4 cars in the world! The CCXR Edition was never going to be a production line car churning out one after another. It was always going to be a real limited edition model, just for the few.