Crank Pinion Gear 2000 Kawasaki Kx250 Kx 250 Primary Drive Spur 93-01 Oem on 2040-parts.com
Washington, Utah, US
This auction is for a crank pinion gear in good condition.
This item was removed from a functioning 2000 Kawasaki KX250 and was tested completely prior to removal. It may fit many other years and models so check with your local dealer before purchasing for fitment questions.
This item functions perfectly. It is ready to install and put to use. It has some cosmetic imperfections as you can see in the images. This part may fit the following vehicles. It is the buyer's responsibility to verify compatibility with your local dealer.
1993 KX250
1994 KX250
1995 KX250
1996 KX250
1997 KX250
1998 KX250
1999 KX250
2000 KX250
2001 KX250
We are parting out the complete bike. Visit our Ebay Store to view the other parts from this bike. Yes, we do combine shipping. See our policies below.
US Customers - Upgrade to Priority Shipping for ONLY $2.00
We stand behind our parts 100%.
We are committed to providing you a good usable part. If you are not satisfied for any reason, please contact us immediately and we will strive to make it right. We do not sell junk parts and discard anything that we wouldn’t put on our own bikes. However, we are human and can make mistakes so please contact us if there is any problem with the part that is not shown in images or mentioned in the description and we will strive to make it right.
We ask in return that a 5 star feedback rating be awarded once you are satisfied.
***Please take a moment to read our policies before buying***
Part Condition: We strive to provide images and a description that fully identifies any wear or damage to the part. We do not sell parts that are unusable. We test each bike before parting it out to identify any problems with components before they go up for sale. You will receive exactly what you see in the images unless otherwise noted in the description. If you don’t see an item in the images then it is not included in the auction.
Part Compatibility: Most parts will fit a wide range of models. We only guarantee it will fit the make model and year of the bike the part was pulled from. In some cases we do provide other models that the part may fit based on dealer data, but we do not guarantee fitment with these models. Please contact your local dealer to verify fitment prior to purchasing.
Shipping: Parts are shipped out within 24 hours of receiving payment, unless payment is received on the weekend in which case the item will be shipped out on the following Monday.
Expedited Shipping: If you require expedited shipping, please contact us prior to purchasing the part to be sure we can meet your needs. We use FedEx or USPS Express mail and can help verify that you will get your part as expected.
Combined Shipping: We do offer combined shipping discounts. If you purchase several parts at the same time, contact us before paying for the items and we will provide you with a single invoice for all the parts including shipping. Please do not ask for combined shipping estimates prior to purchasing the parts. We will only charge you what it costs us to ship the combined items.
International shipping: You are responsible to pay your country’s customs fees, import duties, taxes, etc. These fees will not appear in the listing and will be charged to you by your country’s customs office. USPS priority mail is usually the best value for international shipping. International shipping can be very expensive for heavy items so please enter your location into the shipping calculator and consider the shipping charges before buying. We do not mark merchandise values below value or mark items as “gifts” so please do not ask us to falsify shipping documents.
Utah State Sales Tax: We are located in Utah; therefore, buyers located in Utah are required by law to pay Utah state sales tax. This tax will automatically be added on to your invoice if applicable.
FEEDBACK: We will leave high feedback once payment is received. WE WORK HARD TO DESERVE A 5-STAR RATING FROM YOU. If you feel like you cannot leave a 5-star rating, please contact us first and we will strive to make it right. It is a waste of your time to open a complaint with ebay or paypal prior to contacting us because we are committed to resolving your concern whether you open a complaint or not.
RETURNS: Returns are accepted within 14 days of purchase. The buyer is responsible for return shipping. There is a restocking fee for all returns. This fee will equal the cost of the original shipping plus any additional Ebay or Paypal fees Cannibal Cycle incurred as a result of the order. When the return is a result of our error, there is no restocking fee. There are no returns on electronic items because electrical problems elsewhere in your bike can damage components that are placed in the system. We test run our bikes before parting them out to ensure everything is in good working order.
On Oct-01-13 at 13:54:01 PDT, seller added the following information:
Components for Sale
Kick start lever 1998 honda cr250r cr 250r kickstart kicker 97 98 99 oem(US $66.99)
Breather hose 2003 suzuki rm125 rm 125 oem(US $13.99)
Kick start idler gear 2001 yamaha wr250f wr 250f kickstart yz250f 01-11 oem(US $14.99)
Oil pump shaft and gear 2005 honda crf450r crf 450r 04-08 oem(US $24.99)
Cam shaft 2004 honda crf70f crf 70f oem(US $55.99)
Kick start idler gear 2003 suzuki rm125 rm 125 kickstart oem(US $14.99)
Concept Car of the Week: Volkswagen Microbus (2001)
Fri, 18 Oct 2013The turn of the millennium seemed to induce a feeling of nostalgia among car manufacturers and with it a plethora of heritage/retro designs, including the new Mini, new Ford Mustang and Nissan Z. Following the runaway success of its New Beetle, which probably started the trend, VW asked itself whether it could enjoy the same success with a modern interpretation of the legendary T1 Microbus. Designed at the surf-central design studio in Simi Valley, California, the Microbus Concept took ample inspiration from its distant ancestor, but was modernized in every way.
Lotus appoints Swizz Beatz as Vice President of Creative Design and Global Marketing
Mon, 15 Aug 2011We've become accustomed to surprising and – at times – bizarre news stories emerging from Lotus since Danny Behar became CEO. But judging from reaction in the world of social media this afternoon, even by Lotus's recent standards, the news that it has appointed American rapper Swizz Beatz as its vice president of Creative Design and Global Marketing, came as something of a surprise. Kasseem Daoud Dean, otherwise known as Swizz Beatz, has a broad creative background, having a portfolio that includes music producer, rapper, designer and painter.
BMW M3 GTS (2010) unveiled: a new M3 CSL first official pictures
Thu, 05 Nov 2009BMW might not be producing an M3 CSL, but this is something much better. Called the M3 GTS it’s a stripped-out 450bhp road-racer designed to take on the Porsche 911 GT3 RS. It’s a response to those that thought M Division might have lost its way: 'The BMW M3 GTS which we are currently preparing in our BMW M production workshop is a response to frequently expressed customer wishes', said M Division’s CEO Dr Kay Segler at the unveiling.