Cylinder 2004 Honda Crf70f Crf 70f Jug 47mm Ct70 C70 04-12 Oem on 2040-parts.com
Washington, Utah, US
This auction is for a cylinder in good condition.
This item was removed from a functioning 2004 Honda CRF70F and was tested completely prior to removal. It may fit many other years and models so check with your local dealer before purchasing for fitment questions.
This cylinder functions perfectly. It is ready to install and put to use. It came from a bike that ran perfectly before we pulled it apart. Gasket surfaces are flat and undamaged. The bore is very nice and smooth but may need to be honed before use. This part may fit the following vehicles. It is the buyer's responsibility to verify compatibility with your local dealer.
1976 CT70
1977 CT70
1978 CT70
1978 C70
1979 CT70
1979 C70
1980 CT70
1980 C70
1981 CT70
1981 C70
1982 CT70
1982 C70
1983 C70
1984 C70
1985 C70
1986 TRX70
1987 TRX70
1991 CT70
1992 CT70
1993 CT70
1994 CT70
1997 XR70R
1998 XR70R
1999 XR70R
2000 XR70R
2001 XR70R
2002 XR70R
2003 XR70R
2004 CRF70F
2005 CRF70F
2006 CRF70F
2007 CRF70F
2008 CRF70F
2009 CRF70F
2011 CRF70F
2012 CRF70F
We are parting out the complete bike. Visit our Ebay Store to view the other parts from this bike. Yes, we do combine shipping. See our policies below.
US Customers - Upgrade to Priority Shipping for ONLY $4.00
We stand behind our parts 100%.
We are committed to providing you a good usable part. If you are not satisfied for any reason, please contact us immediately and we will strive to make it right. We do not sell junk parts and discard anything that we wouldn’t put on our own bikes. However, we are human and can make mistakes so please contact us if there is any problem with the part that is not shown in images or mentioned in the description and we will strive to make it right.
We ask in return that a 5 star feedback rating be awarded once you are satisfied.
***Please take a moment to read our policies before buying***
Part Condition: We strive to provide images and a description that fully identifies any wear or damage to the part. We do not sell parts that are unusable. We test each bike before parting it out to identify any problems with components before they go up for sale. You will receive exactly what you see in the images unless otherwise noted in the description. If you don’t see an item in the images then it is not included in the auction.
Part Compatibility: Most parts will fit a wide range of models. We only guarantee it will fit the make model and year of the bike the part was pulled from. In some cases we do provide other models that the part may fit based on dealer data, but we do not guarantee fitment with these models. Please contact your local dealer to verify fitment prior to purchasing.
Shipping: Parts are shipped out within 24 hours of receiving payment, unless payment is received on the weekend in which case the item will be shipped out on the following Monday.
Expedited Shipping: If you require expedited shipping, please contact us prior to purchasing the part to be sure we can meet your needs. We use FedEx or USPS Express mail and can help verify that you will get your part as expected.
Combined Shipping: We do offer combined shipping discounts. If you purchase several parts at the same time, contact us before paying for the items and we will provide you with a single invoice for all the parts including shipping. Please do not ask for combined shipping estimates prior to purchasing the parts. We will only charge you what it costs us to ship the combined items.
International shipping: You are responsible to pay your country’s customs fees, import duties, taxes, etc. These fees will not appear in the listing and will be charged to you by your country’s customs office. USPS priority mail is usually the best value for international shipping. International shipping can be very expensive for heavy items so please enter your location into the shipping calculator and consider the shipping charges before buying. We do not mark merchandise values below value or mark items as “gifts” so please do not ask us to falsify shipping documents.
Utah State Sales Tax: We are located in Utah; therefore, buyers located in Utah are required by law to pay Utah state sales tax. This tax will automatically be added on to your invoice if applicable.
FEEDBACK: We will leave high feedback once payment is received. WE WORK HARD TO DESERVE A 5-STAR RATING FROM YOU. If you feel like you cannot leave a 5-star rating, please contact us first and we will strive to make it right. It is a waste of your time to open a complaint with ebay or paypal prior to contacting us because we are committed to resolving your concern whether you open a complaint or not.
RETURNS: Returns are accepted within 14 days of purchase. The buyer is responsible for return shipping. There is a restocking fee for all returns. This fee will equal the cost of the original shipping plus any additional Ebay or Paypal fees Cannibal Cycle incurred as a result of the order. When the return is a result of our error, there is no restocking fee. There are no returns on electronic items because electrical problems elsewhere in your bike can damage components that are placed in the system. We test run our bikes before parting them out to ensure everything is in good working order.
On Oct-01-13 at 13:51:37 PDT, seller added the following information:
Components for Sale
Water hose joint head 2005 yamaha yz250f yz 250f engine pipe oem(US $21.99)
Inlet boot reed valve 2003 honda cr85rb cr 85rb carburetor isolator pipe oem(US $21.99)
Inner clutch case 2001 yamaha wr250f wr 250f waterpump housing yz250f 01 02 oem(US $53.99)
Kick start lever 2000 suzuki rm250 rm 250 kickstart kicker 96-00 oem(US $93.99)
Left engine case 2000 kawasaki kx250 kx 250 crank case oem(US $130.99)
Complete transmission gearset 2004 crf70f crf 70f tranny gear set crf50f 04-12(US $76.99)
Porsche 911 Safari SUV Crossover heading for Beijing Motor Show
Thu, 26 Dec 2013Porsche 911 Safari SUV Crossover heading for Beijing Motor Show Porsche anoraks bemoaned the arrival of the Porsche Cayenne SUV as a sacrilege, but its overwhelming success has allowed Porsche to garner huge profits and plough a chunk of those in to keeping the iconic 911 relevant, appealing and cutting-edge. It’s also allowed Porsche to take the Audi Q5 and turn it in to what appears to be a hugely capable and appealing baby Cayenne in the guise of the new Porsche Macan, but it seems Porsche is planning another SUV step with a model that really does seem a step too far – a Porsche 911 SUV. Auto Bild’s Motor Revue is reporting that a Porsche 911 Safarai is heading for the Beijing Motor Show in April 2014 sporting bigger wheels and tyres and a raised suspension to deliver a 911 Crossover.
New Nissan GT-R Nismo at the 2013 Tokyo Motor Show
Wed, 20 Nov 2013The Nissan GT-R – one of the most iconic sports car models of all time – was unveiled in its latest go-even-faster Nismo incarnation in Tokyo on Tuesday 19th November 2013. MSN went to soak up the atmosphere at Nissan’s HQ in Yokohama on the outskirts of Tokyo and speak to the management. “Developing the GT-R is an act of passion and a driver of innovation”, so declared Nissan’s overall boss Carlos Ghosn (bottom left) after he was driven on stage by record-breaking driver Michael Krumm at the exclusive reveal of its GT-R supercar in Yokohama.
Whos Where: David Wilkie joins Mindset
Tue, 30 Sep 2008Design Director, David Wilkie, announced last week that he is leaving Bertone to take up a full time position at Mindset AG. Mindset is a new company run by Murat Günak, previously head of Design at Volkswagen, that is developing the electric ‘Commuter' car previewed by Car Design News in February this year. Car Design News spoke with Wilkie about the move, who explained that he'd been working for Mindset part time, leading the design of the Commuter interior for several months now, but "I decided that for the good of Bertone, and for Mindset, that I needed to commit full time to one position; and the appeal of having my hands-on as a designer was very strong; and it's a project I really want to see through properly!" Wilkie is still committed to carrying through several projects at Bertone over the next few weeks as he makes the transition to working with Günak with whom he studied at the Royal College of Art.