Cylinder 2007 Honda Crf250r Crf 250 Jug 77mm Crf250x 04-09 Oem on 2040-parts.com
Washington, Utah, US
This auction is for a cylinder in good condition.
This item was removed from a functioning 2007 Honda CRF250R and was tested completely prior to removal. It may fit many other years and models so check with your local dealer before purchasing for fitment questions.
This cylinder functions perfectly. It is ready to install and put to use. It came from a bike that ran perfectly before we pulled it apart. Gasket surfaces are flat and undamaged. The bore is very nice and smooth but may need to be honed before use. This part may fit the following vehicles. It is the buyer's responsibility to verify compatibility with your local dealer.
2004 CRF250R
2004 CRF250X
2005 CRF250R
2005 CRF250X
2006 CRF250R
2006 CRF250X
2007 CRF250R
2007 CRF250X
2008 CRF250R
2008 CRF250X
2009 CRF250R
2009 CRF250X
2012 CRF250X
We are parting out the complete bike. Visit our Ebay Store to view the other parts from this bike. Yes, we do combine shipping. See our policies below.
US Customers - Upgrade to Priority Shipping for ONLY $3.50
We stand behind our parts 100%.
We are committed to providing you a good usable part. If you are not satisfied for any reason, please contact us immediately and we will strive to make it right. We do not sell junk parts and discard anything that we wouldn’t put on our own bikes. However, we are human and can make mistakes so please contact us if there is any problem with the part that is not shown in images or mentioned in the description and we will strive to make it right.
We ask in return that a 5 star feedback rating be awarded once you are satisfied.
***Please take a moment to read our policies before buying***
Part Condition: We strive to provide images and a description that fully identifies any wear or damage to the part. We do not sell parts that are unusable. We test each bike before parting it out to identify any problems with components before they go up for sale. You will receive exactly what you see in the images unless otherwise noted in the description. If you don’t see an item in the images then it is not included in the auction.
Part Compatibility: Most parts will fit a wide range of models. We only guarantee it will fit the make model and year of the bike the part was pulled from. In some cases we do provide other models that the part may fit based on dealer data, but we do not guarantee fitment with these models. Please contact your local dealer to verify fitment prior to purchasing.
Shipping: Parts are shipped out within 24 hours of receiving payment, unless payment is received on the weekend in which case the item will be shipped out on the following Monday.
Expedited Shipping: If you require expedited shipping, please contact us prior to purchasing the part to be sure we can meet your needs. We use FedEx or USPS Express mail and can help verify that you will get your part as expected.
Combined Shipping: We do offer combined shipping discounts. If you purchase several parts at the same time, contact us before paying for the items and we will provide you with a single invoice for all the parts including shipping. Please do not ask for combined shipping estimates prior to purchasing the parts. We will only charge you what it costs us to ship the combined items.
International shipping: You are responsible to pay your country’s customs fees, import duties, taxes, etc. These fees will not appear in the listing and will be charged to you by your country’s customs office. USPS priority mail is usually the best value for international shipping. International shipping can be very expensive for heavy items so please enter your location into the shipping calculator and consider the shipping charges before buying. We do not mark merchandise values below value or mark items as “gifts” so please do not ask us to falsify shipping documents.
Utah State Sales Tax: We are located in Utah; therefore, buyers located in Utah are required by law to pay Utah state sales tax. This tax will automatically be added on to your invoice if applicable.
FEEDBACK: We will leave high feedback once payment is received. WE WORK HARD TO DESERVE A 5-STAR RATING FROM YOU. If you feel like you cannot leave a 5-star rating, please contact us first and we will strive to make it right. It is a waste of your time to open a complaint with ebay or paypal prior to contacting us because we are committed to resolving your concern whether you open a complaint or not.
RETURNS: Returns are accepted within 14 days of purchase. The buyer is responsible for return shipping. There is a restocking fee for all returns. This fee will equal the cost of the original shipping plus any additional Ebay or Paypal fees Cannibal Cycle incurred as a result of the order. When the return is a result of our error, there is no restocking fee. There are no returns on electronic items because electrical problems elsewhere in your bike can damage components that are placed in the system. We test run our bikes before parting them out to ensure everything is in good working order.
On Oct-01-13 at 13:47:09 PDT, seller added the following information:
Components for Sale
Flywheel stator 2000 kawasaki kx250 kx 250 alternator rotor oem(US $38.99)
Breather hose 2001 yamaha wr250f wr 250f wr400f 01 02 oem(US $13.99)
Valve cover 2003 honda crf450r crf 450r head cover 03-08 oem(US $40.99)
Clutch pressure plate 2005 honda crf450r crf 450r cr250r 02-08 oem(US $19.99)
Clutch basket 2003 suzuki rm125 rm 125 outer gear oem(US $53.99)
Shift pawl ratchet 1998 honda cr250r cr 250r shifter gear drum cam crf150r 93-07(US $17.99)
Ford Mustang Shelby GT500 Super Snake, for when 540 hp isn’t enough
Thu, 25 Jun 2009There was little doubt that Shelby would call it a day following the completion of the 2010 Ford Shelby Mustang GT500. After all, 540 hp just might not cut it for some Shelby faithful. So to take the 2010 GT500 to the next level, Shelby revealed the Super Snake package at the Mid America Ford and Team Shelby Nationals in Tulsa, Okla.
Mazda confirms new SkyActiv-D 1.5 litre diesel engine for next Mazda2
Wed, 11 Jun 2014The next Mazda2, previewed by the Hazumi Concept (pictured) gets a new SKYACTIV 1.5 diesel The Geneva Motor Show this year saw the arrival of the Mazda Hazumi Concept which was the first view of the next generation Mazda2, due to arrive in early 2015. What the Geneva Show also revealed from Mazda was the new SkyActiv-D 1.5 litre diesel engine which is heading for deployment in Mazda’s cars, and now Mazda has confirmed the next Mazda2 will be offered with the new clean and fugal diesel. Similar to the 2.2 litre diesel already available in the Mazda 6 and Mazda 3, the new 1.5 litre offers 103bhp and 185lb/ft of torque and features a bigger homogenous lean burn range, less mechanical resistance and new insulation to improve cooling and efficiency.
Toyota Hydrogen Fuel Cell breakthrough to be announced at Frankfurt Motor Show
Mon, 02 Sep 2013Toyota Hydrogen Fuel Cell breakthrough to be announced at Frankfurt Motor Show Regardless of whether you think the electric car is potentially a planet saviour or not, the idea of powering cars with hydrogen is a powerful one; the holy grail of automotive powertrains. Technically, ICE cars can be built to run using hydrogen (and a retro-fit allowing that to be achieved economically would be a huge breakthrough) but car makers are heading down the road of electric cars being powered by a hydrogen fuel cell at the moment. In Toyota’s case, that means a setup similar to their hybrid cars, with a hydrogen fuel cell replacing the petrol engine.