1961 - 1962 Chevy Impala VHX Instruments
from Dakota Digital
VHX-61C-IMP
The new VHX Systems fit directly into the stock dash of a 1961-62 Chevy Impala without modification. The upper (speedometer/voltmeter/fuel level/message centers) display utilizes the stock trim ring (not included), whereas the lower displays (tachometer/oil pressure/water temp) include machined aluminum/chromed new instrument housings.
Playing off the stock sweep-style speedometer, VHX-61C-IMP offers six readouts in a direct bolt-in package for all 1961-62 Chevy Full size cars. Original chrome trim for the speedometer as well as instrument housing are reused (not included), while machined aluminum, chrome plated gauge housings are included for the temp, tach, and oil gauges.
Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at their facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry!
Fits into stock bezel, bezel is NOT included.
VHX System Includes:
Analog Gauges
Speedometer - 0-140 MPH (optional metric version 0-225 kmh)
Tachometer - 0-8000 RPM
Oil Pressure - 0-80 psi
Water Temperature - 100-260ºF (optional metric version 40-120ºC)
Fuel Level - E, 1/4, 1/2, 3/4, F
Voltmeter - 9-17 VDC
Lighting - Back lit technology is popular with performance
instrumentation due to precise lighting allowing you see what
is truly important when you really need it at a quick glance. Each
number, tick mark, annunciator, needle, indicator and digital message
center is lit by a series of LEDs behind the gauge face.
Digital Message Center
Standard Displays:
Odometer (One time user settable, Million Mile)
Dual (A/B) Trip Meter (0-9,999.9)
Clock (12 hour)
Performance Meters:
0-60 MPH Timer (0-100 kmh)
1/4 mile time
1/4 mile end speed (trap speed)
High speed recall
High RPM recall
Gauges:
Speedometer (0-255 MPH / KM/H)
Tachometer (0-9,990 RPM)
Oil Pressure (0-100 psi displayed in 1 psi increments)
Water Temperature (100-300ºF / 40-150ºC displayed in 1ºF/ºC increments)
Voltmeter (9-17 VDC)
Fuel Level (0-99% full)
Lighting:
Auto-contrasting LCD display for optimal view in the brightest of sunlight.
LED backlit at night to match/complete the look at night.
Built-In Indicators
Turn Signals (Left/ Right)
High Beam
Check Engine
Parking Brake
Cruise Control (On/ On & Engaged when vehicle is equipped)
Gear Position (Optional GSS-2000 sensor required, sold separately)
4 x 4 (When vehicle is equipped)
Wait to Start (When vehicle is equipped)
Included Sensors:
Water Temperature - 1/8" NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure - 1/8" NPT solid state sensor with a 10 ft harness.
Cable Drive Speed Sensor/Generator - Replaces GM style speedometer cables with a 10 ft harness (Tremec and Ford style adapters available upon request).
Bushings - Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Calibration
Pushbutton - Dakota Digital instruments are programmed and
operated by the push of a button. Simply mount the included
pushbuttons supplied with your gauges in a convenient and easily
accessible location. These buttons are used to calibrate your
speedometer, set the cylinder count and the fuel level gauge. Once
properly configured these same buttons are used to access the wealth of
information located in the Digital Message Centers.
More
info about this system and pics are available below. This listing is
for ONE VHX gauge system with your choice of style and backlighting
color. Please let us know your options when you make your purchase.
Metric system (KM/H and degrees Celsius) is available as a custom option (no additional cost) but may take 4-8 weeks to build.
VHX-61C-IMP with SILVER ALLOY style and BLUE display (bezel is NOT included, fits into stock bezel):
VHX-61C-IMP with BLUE display at night:
VHX-61C-IMP with SILVER ALLOY:
VHX-61C-IMP with SILVER ALLOY style and RED display:
At Night:
VHX-61C-IMP with SILVER ALLOY style and WHITE display:
At Night:
VHX-61C-IMP with CARBON FIBER style and BLUE display (BEZEL IS NOT INCLUDED):
VHX-61C-IMP with CARBON FIBER style and RED display (BEZEL IS NOT INCLUDED):
VHX-61C-IMP with BLACK ALLOY style and BLUE display (bezel is NOT included):
At Night:
VHX-61C-IMP with BLACK ALLOY style and RED display:
At Night:
VHX-61C-IMP with BLACK ALLOY style and WHITE display:
At Night:
Back of Unit: