Danforth Style Boat Anchor Boats 15'-19' Slip Ring 7hq on 2040-parts.com
Davison, Michigan, US
This Listing is for one Danforth Quik Set Hooker Slip Ring Anchor. This anchor is designed for boats 15 - 19 feet in length. Please see my other listings for larger or smaller anchors.
Proudly Made in the USA!
Please see the bottom of this listing for Frequently Asked Anchor Questions
Features:
- Manufactured by Tie Down Engineering
- Model 7HQ
- Quick Penetration
- Excellent Holding Power
- Danforth Slip Ring Design
- Excellent Value
- Recommended for Boats 15' - 19' in Length (always use one size larger for storm anchors)
- Hot Dipped Galvanized Finish
- Slip-ring design for easy retrievability
Dimensions are as follows:
- Length: 13.5 inches,
- Width: 14.5 inches,
- Length of Flukes: 9.5 inches,
- Weight: 4.2 pounds.
These anchors work off of mechanical advantage, not total weight. The weight of this anchor is listed for reference. Do not be concerned about the low weight of these anchors as Danforth style anchors do not rely on weight to hold.
Please see our Ebay store for more Marine Supplies, Vinyl Graphics, Autobody Supplies, Car Care Products and Used Car Parts. If you do not see what you want please E-mail me and I will list a Specific Auction for you!
Shipping is Actual Cost. All anchors ship UPS Ground. Pleas use Shipping Calculator for a Quote. Please E-mail us for a quote if you would prefer a different shipping method. We will accept returns ONLY IF the item is in new unused condition and in it's original packaging. All returns must be authorized. We can not refund shipping cost
Stock: This item is a normal stock item and all items are in stock at the time of listing. If for any reason this item will not be able to be shipped within 1-2 days we would notify you promptly and allow you the option of canceling the purchase.
If you have any questions please contact us!
Frequently Asked Questions: Anchoring<>
What size anchor do I need? The recommended boat size for each anchor is listed above. Anchors are tested under ‘’Average Conditions’’. If you frequently anchor in High Winds / Stormy conditions, Rough water / Swift Current, Poor Bottom conditions, or if you have a High Profile boat we recommend using an anchor one size larger.
This anchor looks small for my boat and isn’t very heavy? Danforth style anchors get their holding power from mechanical design. Therefore, it is not necessary for the anchor to be excessively large or heavy to work.
Do I need to use an Anchor Chain with this Anchor? It Is necessary to use an anchor chain with Danforth style anchors. The length of chain helps the anchor set by holding the anchor stock down. If used without a chain, Danforth anchors may not set correctly.
It is not necessary to use a chain with Chene Style Anchors. Navy style, Mushroom, River, and Richter anchors may benefit from the use of anchor chain but will also work without.
How much Anchor Line do I need? A Ratio of 5:1 is considered to be the minimum scope for most anchors. This means that for every foot of water depth, 5 feet of line is required. For example: to anchor in 30 feet of water, 150 feet of line is required. This is a important aspect of anchoring to remember. If the anchor line is too short the anchor may fail to set or break free easily. The Chene and Richter anchors we carry are exempt from this requirement
What style of anchor is best for my boat? The style of anchor used is as much personal preference as it is science. Each anchor on the market has advantages and disadvantages. Please see each item description for specific advantages to each anchor design and recommended anchoring conditions.
Should I use a Solid Stock or Slip Ring Design? If you have decided to use a Danforth Style anchor then you need to decide if you want a Solid Stock or Slip Ring design. The anchors holding power will be the same for both designs. A Solid Stock anchor will be slightly less susceptible to damage due to its solid steel stock. The Slip Ring style offers easier retrieval when used in rocks and other easy snag bottom conditions
Is this anchor protected against corrosion? Yes, All of the anchors we sell are protected against corrosion. Each manufacturer uses different types of coatings so please see each item description for the type of coating used.
Is this anchor made in the <>USA? We strive to carry as many American Made Products as possible and many of our anchors are made in the USA. Every item that is made in America will display ‘’ Proudly Made in the USA’’ in the item description
Why is the shipping cost so high? We only charge actual UPS shipping cost and do not profit from shipping. Unfortunately, due to the size and weight of some anchors shipping can be expensive. We always combine shipping on items when possible.
Important Note: These answers should be used as general guidelines only and should not be substituted for Professional Advice. We have no way of foreseeing every condition these anchors may be used in. If you are not confident in which anchor you require, we recommend contacting your boat’s manufacturer or local authorities to get information on any specific conditions unique to your application. All item images and item descriptions on this listing are property of Underwoods Auto & Marine LLC and are not to be used, copied, or otherwise reproduced without written permission. The Term ‘’Danforth’’ is property of Tie Down Engineering.
Powered by ProStores
Anchoring, Docking for Sale
- Double braid nylon dock line gold & white 3/8"x25' boat(US $12.96)
- Double braid nylon dock line black 3/8"x15' boat 12"eye(US $8.25)
- 2 boat fenders bumper 22'' x 6.5'' polyform premium red american made in usa(US $57.50)
- 4.5" x 16" boat docking inflatable fenders 4x black vinyl dock guard double eyed(US $47.98)
- Lewmar sprint 1000 vertical winlass(US $1.00)
- Mooring pendant 1" x 18' pennant, rope, line(US $89.00)
McLaren P1: New photos & video of production P1
Fri, 06 Sep 2013The McLaren P1 production car pictured hot weather testing We’ve had a surprising amount of McLaren P1 news in the last couple of weeks, with a claimed lap time at the Nurburgring that didn’t quite meet expectation, P1 customer Jay Leno getting to grips with the P1 at the Top Gear track and the news that the P1 is all but sold out. Now, with the first P1s getting close to delivery (McLaren are about to start building customer cars at the rate of one a day), McLaren has released photos and video from their final stint of hot weather testing in the US, with a completely undisguised, production version P1. McLaren have been in the west of the US, where temperatures reach 52 degrees, putting the P1 through its paces in extreme heat in California, Nevada and Arizona, both on the road and at the Willow Springs International Raceway in California, just to be sure it doesn’t melt in the sun.
New Peugeot 208 (2012) Revealed
Tue, 01 Nov 2011New 2012 Peugeot 208 - photos revealed a day early Just last week we revealed that the new Peugeot 208 will be revealed tomorrow (2nd November). Which was clearly Peugeot’s plan. Unfortunately, for Peugeot, a German site had broken the embargo on the 208, so we have the first official pictures of Peugeot’s replacement for the 207 a day ahead of the event.
2014 Peugeot 5008 gets a bit of a facelift
Thu, 09 Jan 20142014 Peugeot 5008 gets a bit of a facelift You’d expect an MPV from Peuegot to be a bit of a soggy, boring drive, but actually the Peugeot 5008 MPV is not bad at all. But the problem has been that the 5008 isn’t exactly the best looking kid on the block. But Peugeot has now fixed a lot of that by bringing the 5008 up to date with Peugeot’s new family nose as part of a mid-life facelift for the 5008.