Find or Sell any Parts for Your Vehicle in USA

Deutsch Dt 2-pin Genuine Connector Kit, D-key Wedge, 14 Awg Solid Contacts on 2040-parts.com

US $7.49
Location:

Ontario, California, United States

Ontario, California, United States
Condition:New Brand:Deutsch Placement on Vehicle:Left, Right, Front, Rear Manufacturer Part Number:DT2-WNS-14-KIT-D Country/Region of Manufacture:United States UPC:Does not apply

High Performance connectors

Kit Content:
  • 2 x 0462-215-16141 (14 AWG nickel Solid Pins)
  • 2 x 0462-209-16141 (14 AWG nickel Solid Sockets)
  • 1 x DT04-2P (connector)
  • 1 x DT06-2S (connector)
  • 1 x W2PD (D Key wedge) 
  • 1 x W2SD (D Key wedge)

Country of Origin: USA

Competitor Cross Reference: MSD8183 

Performance specifications:
DEUTSCH electrical connectors will stand up to the harsh environmental challenges that are common to industrial markets that require advanced performance. Proper parts, procedures, and tooling must be used.

Temperature: Operating at temperatures from -55° C to +125° C continuous at rated current.

Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.

Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.

Physical Shock: No unlocking, unmating, or other unsatisfactory result during or after 50 G’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202, Method 213, Condition “C”.

Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications.

Insulation Resistance: 1000 megohms minimum at 25° C.

Moisture Resistance: Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage.

Dielectric Withstanding Voltage: Current leakage less than 2 milliamps at 1500 VAC.

Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55° C to +125° C.


The products are in stock and ready to ship today. Order today before 1PM PST time will ship the items in the same business day from California, USA.


Shipping:
  • Items will be shipped upon receipt of payment
  • We ship via USPS
Payment:
  • Paypal and Credit card process by Paypal


On Jan-20-16 at 14:49:31 PST, seller added the following information:

Driven: Chevrolet Volt

Tue, 21 Sep 2010

Meeting the Chevrolet Volt could easily have been an anti-climax. This is a design that ‘feels' nearly four years old — the concept first seen in Detroit in 2007. Together with the online hype surrounding it, and the part it plays in GM's renaissance, the weight of expectation is alarmingly high.

BAC Mono for sale: The only brand new Mono for sale…in the World

Thu, 23 May 2013

That’s because the BAC Mono is not just a stunning car to drive with its 2.3 litre 4-cylinder Cosworth engine delivering 280bhp in a car that weighs so little it gets a power to weight ratio of 520bhp per tonne, and can get to 62mph in a scant 2.8 seconds, and comes with a great spec. The Mono is built using carbon fibre composite wrapped round a steel safety cell, an FIA compliant steel rollover structure, an F3-spec 6-speed sequential ‘box, pushrod suspension, racing damping, AP brakes and special tryes from Khumo. And it’s properly bolted together too, unlike many track-focused cars.

2011 Jeep Grand Cherokee to start at less than $33,000 for four-wheeler

Wed, 12 May 2010

Perhaps the most important vehicle to be launched by Chrysler this year, the 2011 Jeep Grand Cherokee, will start at a price that's a shade less than $33,000 for a four-wheel-drive model. The base model with two-wheel drive is $30,995. This Jeep, shown in concept form for more than a year, is critical to refreshing the Detroit automaker's aging lineup and generating some much-needed product mojo.