Drivers Seat Lift Kit 2015 Silverado Gmc Sierra Truck " How To Raise Your Seat " on 2040-parts.com

This kit will change the way you sit in your truck. People with lower back problems will find a complete difference in long road trips from sitting in a posture where their tailbone is lower than their knees.

And for those people who feel they are sitting on the floorboard when they are driving this kit will change your visibility as you sit higher.

This kit is very well made and fits ALL Regular cabs, Extended cabs, and Club cabs with or with out  6 way or manual seats. It does not fit the 10 way GM power seat option.

Installed in about 30 minutes - no cutting, no drilling, no welding, no fabrication required.

As easy as 1-2-3-4  ! Installation Instructions   Unbolt the 6 eight mm nuts from the seat tracks ( 13 mm wrench required ) You are " NOT " removing the # 31 torx bolts that hold the seat to the floorboard you are removing the 6 flange nuts that secure the seat to the seat track. first move the seat all the way forward and remove the 2 nuts on  "each" side of the seat tracks in the rear. Then slide the seat backwards to remove the 2 front nuts. There is " 1 "on  each side of front side of the seat tracks. a) lift just the side of the seat closest to the console and install the "NEW" inside bracket over the factory seat adjuster you just removed the nuts from. You might require help from a friend and then lower it back down.   b) lift the side of the seat closest to the trucks door panel and install the "NEW" door side bracket over the factory seat adjuster you just removed the other 3 nuts from. lower it back down.  c) install the 6 new included bolts with the bolt facing downward , then install the flange nut on the bottom. d) tighten down all 6 factory nuts to the seat adjuster and use a second 13 mm wrench to hold the included bolts and nuts on the top side of your lift kit. e) if you are installing the kit by yourself we suggest the use of wood or plastic shims to raise the seat and a rolled up towel along the door side of the seat to help with stability of the seat while raising it to install the lift brackets. It is important to raise the seat evenly during installation as not to bind on the factory's installed seat track studs. We are quite aware that this is not as simple of an install as previous years, but, building a kit that did not require seat removal or dis-connecting the seat air bag was the challenge. seat removal is not necessary,nor recomended,as you could damage your trucks door panel or steering wheel , photo's showing the seat outside the truck are just for illustration.  Photo's show the installed kit in bare Galvaneeled steel for demonstration purposes. You kit will arrive with a matte black powder coated finish for durability and a factory finish. If you are interested in raising your passengers seat or require a different lift height please send us a message thru ebay.                              NOTICE OF COPYRIGHT   YES, IT IS THAT EASY!!! Return Policy with Money Back Guarantee!   We are so certain that you will be completely satisfied with our kit that we offer a 60-day unconditional money back guarantee. If you are not completely satisfied for any reason return the product to us within 60 days for a complete refund, just email us for a return request . We are here to help truck owners, with a 100 percent satisfaction goal at no risk to our customers. This kit is our product for sale on ebay and it is what we do !! NOTE: One kit raises one seat  - " just the drivers side "  , if you are wanting to raise the passengers seat as well please contact us first before ordering. Shipping & Handling: Other US territories:    Contact me for shipping quote International:    Contact me for shipping quote